Effect of oxidation behavior on the mechanical and thermal properties of plasma sprayed tungsten coatings

Journal of Thermal Spray Technology

Volumn 17, Issue 3, 2008, Pages 377-384

  Hu, Deyang ^a   Zheng, Xuebin ^a   Niu, Yaran ^a   Ji, Heng ^a   Chong, Fali ^b   Chen, Junling ^b  

^a SHANGHAI INSTITUTE OF CERAMICS   (China)

^b INSTITUTE OF PLASMA PHYSICS   (China)

Author keywords

APS; Bonding strength; Thermal conductivity; Thermal loading experiment; Tungsten coating; VPS

Indexed keywords

APS; BONDING STRENGTH; BONDING STRENGTHS; CHEMICAL COMPOSITIONS; ELECTRON-BEAM; HEAT LOADS; LOADING EXPERIMENTS; MECHANICAL AND THERMAL PROPERTIES; OXIDATION BEHAVIORS; OXIDE CONTENTS; ROOM TEMPERATURES; THERMAL CONDUCTIVITY; THERMAL LOADING EXPERIMENT; TUNGSTEN COATING; TUNGSTEN COATINGS; VACUUM PLASMA-SPRAYING; VPS;

CHEMICAL PROPERTIES; COATINGS; ELECTRON BEAMS; ELECTRON OPTICS; MECHANICAL PROPERTIES; METAL CLADDING; MICROSTRUCTURE; PARTICLE BEAMS; PESTICIDES; PHASE SHIFTERS; PLASMA DIAGNOSTICS; PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION; PLASMA JETS; PLASMAS; PROTECTIVE COATINGS; SPRAYED COATINGS; SPRAYING; THERMAL LOAD; THERMODYNAMIC PROPERTIES; THERMOELECTRICITY; TUNGSTEN;

PLASMA SPRAYING;

EID: 49449088259     PISSN: 10599630     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11666-008-9190-4     Document Type: Review

References (35)

1. B. Vastra, B. Schedler, M. Merola, F. Jacquinot, A. Cottin, D. Cauvin, M. Febvre, Y. Leblanc, Manufacturing of Prototype Components for the ITER Divertor Baffle, Fusion Eng. Des., 2003, 66-68, p 341-346
2. N. Yoshida, Review of Recent Works in Development and Evaluation of High-Z Plasma Facing Materials, J. Nucl. Mater., 1999, 266-269, p 197-206
3. H. Maier, J. Luthin, M. Balden, J. Linke, F. Koch, H. Bolt, Properties of Tungsten Coatings Deposited onto Fine Grain Graphite by Different Methods, Surf. Coat. Technol., 2001, 142-144, p 733-737
4. A. Cambe, E. Gauthier, J.M. Layet, S. Bentivegna, Development of Tungsten Coating for Fusion Applications, Fusion Eng. Des., 2001, 56-57, p 331-336
5. S. Tamura, K. Tokunaga, N. Yoshida, Damage Process of Resolidified Part on CVD-W Coated Molybdenum under High Heat Load, J. Nucl. Mater., 2003, 313-316, p 250-254
6. J. Matějíček, P. Chráska, J. Linke, Thermal Spray Coating for Fusion Applications-Review, J. Therm. Spray Technol., 2007, 16(1), 64-83
7. T. Hirai, A. Kreter, J. Malzbender, T. Ohgo, V. Philipps, G. Pintsuk, A. Pospieszczyk, Y. Sakaw, G. Sergienko, T. Tanabe, Y. Ueda, M. Wada, Critical Heat Flux Loading Experiments on CVD-W Coating in the TEXTOR Tokamak, Fusion Eng. Des., 2006, 81, p 175-180
8. K. Nakamura, S. Suzuki, T. Tanabe, M. Dairaku, K. Yokoyama, M. Akiba, Disruption Erosions of Various Kinds of Tungsten, Fusion Eng. Des., 1998, 39-40, p 295-301
9. S. Deschka, C. Garcia-Rosales, W. Hohenauer, R. Duwe, E. Gauthier, J. Linke, M. Lochter, W. Mallener, L. Plöchl, P. Rödhammer, A. Salito, Manufacturing and High Heat Flux Loading of Tungsten Coatings on Fine Grain Graphite for the ASDEX-upgrade Divertor, J. Nucl. Mater., 1996, 233-237, p 645-649
10. H. Maier, J. Luthin, M. Balden, S. Lindig, J. Linke, V. Rohde, H. Bolt, ASDEX Upgrade Team, Development of Tungsten Coated First Wall and High Heat Flux Components for Application in ASDEX Upgrade, J. Nucl. Mater., 2002, 307-311, p 116-120
11. B. Riccardi, A. Pizzuto, A. Orsini, S. Libera, E. Visca, L. Bertamini, F. Casadei, E. Severini, R. Montanari, R. Vesprini, P. Varone, G. Filacchioni, and N. Litunovsky, Tungsten Thick Coatings for Plasma Facing Components, Proc. 18th Symp. Fusion Technology, B. Beaumont, P. Libeyre, B. de Gentile, and G. Tonon, Eds. (Marseille, France, CEA), 1998, p 223-226
12. J. Matějíček, Y. Koza, V. Weinzettl, Plasma Sprayed Tungsten-based Coatings and their Performance under Fusion Relevant Conditions, Fusion Eng. Des., 2005, 75-79, p 395-399
13. S. Boire-Lavigne, C. Moreau, R.G. Saint-Jacques, The Relationship between the Microstructure and Thermal Diffusivity of Plasma-sprayed Tungsten Coatings, J. Therm. Spray Technol., 1995, 4(3), p 261-267
14. H. Greuner, H. Bolt, B. Böswirth, S. Lindig, W. Kühnlein, T. Huber, K. Sato, S. Suzuki, Vacuum Plasma-sprayed Tungsten on EUROFER and 316L: Results of Characterisation and Thermal Loading Tests, Fusion Eng. Des., 2005, 75-79, 333-338
15. H.-K. Kang, Thermal Properties of Plasma-Sprayed Tungsten Deposits, J. Nucl. Mater., 2004, 335, p 1-4
16. S.H. Leigh, C.K. Lin, C.C. Berndt, Elastic Response of Thermal Spray Deposits under Indentation Tests, J. Am. Ceram. Soc., 1997, 80(8), p 2093-2099
17. PPMS-Hardware & Options Manuals, Quantum Design Co. Ltd., 2003, p 1-7
18. J. Du, Z. Li, G. Liu, H. Zhou, C. Huang, Surface Characterization of CVD Tungsten Coating on Molybdenum Substrate, Surf. Coat. Technol., 2005, 198, p 169-172
19. P. Wang, X. Li, C. Lu, T. Chen, G. Chen, S. Zhuo, G. Tao, H. Gu, L. Yu, Chemical and Structural Characterization for Advanced Inorganic Materials, 1st ed., Beijing: Higher Education Press, 2006, p 315-323 (in Chinese)
20. É. Hegetüs, J. Neugebauer, M. Mészáros, Apparent Reversibility of the β-w → α-w Transformation, Int. J. Refract. Met. Hard Mater., 1998, 16, p 31-35
21. 2: Effect of the Modifications of the Surface States Due to Redox Treatments on the Skeletal Rearrangement of Hydrocarbons, J. Catal., 1999, 184, p 406-420
22. T. Polar, N.M.G. Parreira, A. Cavaleiro, Tungsten Oxide with Different Oxygen Contents: Sliding Properties, Vacuum, 2007, 81(11-12), p 1426-1429
23. C. Huang, X. Zhou, C. Ding, Investigation of the Thermomechanical Properties of a Plasma-Sprayed Nanostructured Zirconia Coating, J. Eur. Ceram. Soc., 2003, 23(9), p 1449-1455
24. P. Zhang, Thermal Spray Materials, 1st ed., National Defense Industry Press, Beijing, China, 2006, p 8-10 (in Chinese)
25. J. Matéjíček, K. Neufuss, D. Kolman, O. Chumak, and V. Brožek, Development and Properties of Tungsten-based Coatings Sprayed by WSP, Proc. International Thermal Spray Conference (Basel, Switzerland), 2005, p 634-640
26. N. Parreira, N. Carvalho, A. Cavaleiro, Synthesis, Structural and Mechanical Characterization of Sputtered Tungsten Oxide Coatings, Thin Solid Films, 2006, 510(1-2), p 191-196
27. X.L. Zheng, S.R. Qiao, and X.P. Qin, Material Mechanical Properties, 2nd ed., Northwestern Polytechnical University Press, Xi'an, China, 2000, p 50, 54-56 (in Chinese)
28. A. Kucuk, C.C. Berndt, U. Senturk, R.S. Lima, Influence of Plasma Spray Parameters on Mechanical Properties of Yttria Stabilized Zirconia Coatings. II: Acoustic Emission Response, Mater. Sci. Eng. A, 2000, 284(1-2), p 41-50
29. R.G. Castro, A.H. Barlett, K.J. Hollis, R.D. Fields, The Effect of Substrate Temperature on the Thermal Diffusivity and Bonding Characteristics of Plasma Sprayed Beryllium, Fusion Eng. Des., 1997, 37, p 243-252
30. B. Riccardi, R. Montanari, M. Casadei, G. Costanza, G. Filacchioni, A. Moriani, Optimisation and Characterisation of Tungsten Thick Coatings on Copper Based Alloy Substrates, J. Nucl. Mater., 2006, 352, p 29-35
31. X. Liu, L. Yang, S. Tamura, K. Tokunaga, N. Yoshida, N. Noda, Z. Xu, Thermal Response of Plasma Sprayed Tungsten Coating to High Heat Flux, Fusion Eng. Des., 2004, 70, p 341-349
32. S. Tamura, K. Tokunaga, N. Yoshida, M. Taniguchi, K. Ezato, K. Sato, S. Suzuki, M. Akiba, Y. Tsunekawa, M. Okumiya, Damage Process of High Purity Tungsten Coatings by Hydrogen Beam Heat Loads, J. Nucl. Mater., 2005, 337-339, p 1043-1047
33. K. Tokunaga, N. Yoshida, N. Noda, T. Sogabe, T. Kato, High Heat Load Properties of Tungsten Coated Carbon Materials, J. Nucl. Mater., 1998, 258-263, p 998-1004
34. K. Tokunaga, N. Yoshida, N. Noda, Y. Kubota, S. Inagaki, R. Sakamoto, T. Sogabe, L. Plöchl, Behavior of Plasma-Sprayed Tungsten Coatings on CFC and Graphite under High Heat Load, J. Nucl. Mater., 1999, 266-269, p 1224-1229
35. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, T.Y.R. Lee, Thermophysical Properties of Matter, Vol. 13, Thermal Expansion Nonmetallic Solids, IFI/ Plenum Press, New York, 1975, p 405