An evaluation of heat partition in the high-speed turning of AISI/SAE 4140 steel with uncoated and TiN-coated tools

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 222, Issue 7, 2008, Pages 759-771

  Akbar, F ^a   Mativenga, P T ^a   Sheikh, M A ^a  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Contact phenomena; Finite element method (FEM); Heat partition; High speed machining (HSM); TiN coated tools

Indexed keywords

CARBIDES; ELECTRON BEAM LITHOGRAPHY; FINITE ELEMENT METHOD; HAND TOOLS; HEAT SHIELDING; ITERATIVE METHODS; MACHINE TOOLS; MACHINING; MATERIALS SCIENCE; METAL WORKING TOOLS; PARTITIONS (BUILDING); SCANNING ELECTRON MICROSCOPY; SHIELDING; SPEED; STEEL; TIN; TITANIUM COMPOUNDS; TITANIUM NITRIDE; TOOL STEEL;

COATED TOOLS; CONTACT PHENOMENA; CONVENTIONAL CUTTING; CONVENTIONAL MACHINING; CUTTING SPEEDS; CUTTING TEMPERATURES; CUTTING TESTS; DEPTH OF CUT; FEED RATES; FINITE ELEMENT METHOD (FEM); HEAT INTENSITY; HEAT PARTITION; HEAT PARTITIONING; HIGH-SPEED MACHINING; HIGH-SPEED MACHINING (HSM); HIGH-SPEED TURNING; HIGH-STRENGTH ALLOY STEEL; INFRARED THERMAL IMAGING CAMERA; MULTIPLE POINTS; SCANNING ELECTRON MICROSCOPE; SHIELDING PROPERTIES; TIN COATINGS; TIN-COATED TOOLS; TOOL WEARS; TOOL-CHIP CONTACT;

CUTTING TOOLS;

EID: 49349109516     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM1072     Document Type: Article

References (40)

1. Fallbohmer, P., Rodriguez, C. A., Ozel, T., and Altan, T. High-speed machining of cast iron and alloy steels for die and mold manufacturing. J. Mater. Processing Technol., 2000, 98, 104-115.
2. Schulz, H. and Moriwaki, T. High-speed machining. Ann. CIRP, 1992, 41(2), 637-643.
3. König, W. New approaches to characterize cutting tool coatings. Ann. CIRP, 1992, 41(1), 49-52.
4. Rech, J. and Djouadi, M. A. High speed gear nobbing. Wear, 2001, 250, 45-53.
5. Erdemir, A. and Hochman, R. F. Surface metallurgical and tribological characteristics of TiN-coated bearing steels. Surf. Coatings and Technol., 1988, 36, 755-763.
6. Wallen, P. and Hogmark, S. Influence of TiN coating on wear of high speed steel at elevated temperature. Wear, 1989, 130, 123-135.
7. Trent, E. M. Metal cutting, 2nd edition, 1984 (Butterworth & Co, London, UK).
8. Trent, E. M. Metal cutting and the tribology of seizure, i: Seizure in metal cutting. Wear, 1988, 128, 29-45.
9. Trent, E. M. Metal cutting and the tribology of seizure, ii: Movement of work material over the tool in metal cutting. Wear, 1988, 128, 46-64.
10. Blok, H. Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions. In Proceedings of General Discussion on Lubrication and Lubricants, Institute of Mechanical Engineers, London, UK, 1938, pp. 222-235.
11. Chao, B. T. and Trigger, K. J. Temperature distribution at the tool-chip interface in metal cutting. Trans. ASME, 1955, 72, 1107-1121.
12. Chao, B. T. and Trigger, K. J. Temperature distribution at tool-chip and tool-work interface in metal cutting. Trans. ASME, 1958, 80(1), 311-320.
13. Komanduri, R. and Hou, Z. B. Thermal modeling of the metal cutting process, part ii: Temperature rise distribution due to frictional heat source at the tool-chip interface. Int. J. Mech. Sci., 2001, 43, 57-88.
14. Huang, Y. and Liang, S. Y. Cutting temperature modeling based on non-uniform heat intensity and partition ratio. Mach. Sci. and Technol., 2005, 9, 301-323.
15. Karpat, Y. and Özel, T. Predictive analytical and thermal modeling of orthogonal cutting process - part i: Predictions of tool forces, stresses, and temperature distributions. Trans. ASME, J. Mfg Sci. and Engng, 2006, 128, 435-444.
16. Karpat, Y. and Özel, T. Predictive analytical and thermal modeling of orthogonal cutting process - part ii: Effect of tool flank wear on tool forces, stresses, and temperature distributions. Trans. ASME, J. Mfg Sci. and Engng, 2006, 128, 445-453.
17. Moriwaki, T., Sugimura, N., and Luan, S. Combined stress, material flow and heat analysis of orthogonal machining of copper. Ann. CIRP, 1993, 42(1), 75-78.
18. Takeuchi, Y., Sakamoto, M., and Sata, T. Improvement in the working accuracy of an nc lathe by compensating for thermal expansion. Precision Engng, 1982, 4(1), 19-24.
19. Wright, P. K., McCormick, S. P., and Miller, T. R. Effect of rake face design on cutting tool temperature distributions. Trans. ASME J. Engng for Industry, 1980, 102(2), 123-128.
20. Lo Casto, S., Lo Valvo, E., and Micari, F. Measurement of temperature distribution within tool in metal cutting. Experimental tests and numerical analysis. J. Mech. Working Technol., 1989, 20, 35-46.
21. Grzesik, W. and Nieslony, P. A computational approach to evaluate temperature and heat partition in machining with multilayer coated tools. Int. J. Mach. Tools and Mf, 2003, 43, 1311-1317.
22. Loewen, E. G. and Shaw, M. C. On the analysis of cutting tool temperatures. Trans. ASME, 1954, 71, 217-231.
23. Abukhshim, N. A., Mativenga, P. T., and Sheikh, M. A. Investigation of heat partition in high speed turning of high strength alloy steel. Int. J Mach. Tools and Mf 2005, 45, 1687-1695.
24. Tay, A. E., Stevenson, M. G., and DeVahl Davis, G. Using the finite element method to determine temperature distribution in orthogonal machining. Proc. Instn. Mech. Engrs, 1974, 188, 627-638.
25. Boothroyd, G. Temperatures in orthogonal metal cutting. Proc. Instn. Mech. Engrs, 1963, 177(29), 789-810.
26. Wanigarathne, P. C., Kardekar, A. S., Dillon, O. W., Poulachon, G., and Jawahir, I. S. Progressive toolwear in machining with coated grooved tools and its correlation with cutting temperature. Wear, 2005, 259, 1215-1224.
27. Kwon, P., Schiemann, T., and Kountanya, R. An inverse estimation scheme to measure steady-state tool-chip interface temperatures using an infrared camera. Int. J. Mach. Tools and Mf 2001, 41, 1015-1030.
28. Davies, M. A., Cao, Q., Cooke, A. L., and Ivester, R. On the measurement and prediction of the temperature fields in machining. Ann. CIRP, 2003, 52, 77-80.
29. M'Saoubi, R., Le Calvez, C., Changeux, B., and Lebrun, J. L. Thermal and microstructural analysis of orthogonal cutting of low alloyed carbon steel using an infrared-charge-coupled device camera technique. Proc. Instn. Mech. Engrs, Part B: J. Engineering Manufacture, 2002, 216(B), 153-165.
30. M'Saoubi, R. and Chandrasekaran, H. Investigation of the effects of tool microgeometry and coating on tool temperature during orthogonal turning of quenched and tempered steel. Int. J. Mach. Tools and Mf, 2004, 44, 213-224.
31. Davies, M. A., Cooke, A. L., and Larsen, E. R. High bandwidth thermal microscopy of machining AISI 1045 steel. Ann. CIRP, 2005, 54(1), 63-66.
32. Davies, M. A., Ueda, T., M' Saoubi, R., Mullany, B., and Cooke, A. L. On the measurement of temperature in material removal processes. Ann. CIRP, 2007, 56(2), 581-604.
33. Filice, L., Umbrello, D., Beccari, S., and Micari, F. On the FE codes capability for tool temperature calculation in machining processes. J. Mater. Processing Technol., 2006, 174, 286-292.
34. Kim, H. and Oh, S. I. Evaluation of heat transfer coefficient during heat treatment by inverse analysis. J. Mater. Processing Technol., 2001, 112, 157-165.
35. Childs, T., Maekawa, K., Obikawa, T., and Yamane, Y. Metal machining theory and applications, 2000 (Arnold, London, UK).
36. Gale, W. F. and Totemeier, T. C. Smithells metals reference book, 2004 (Elsevier, London, UK).
37. Yen, Y.-C., Jain, A., Chigurupati, P., Wu, W.-T., and Altan, T. Computer simulation of orthogonal cutting using a tool with multiple coatings. Mach. Sci. and Technol., 2004, 8(2), 305-326.
38. Lengauer, W., Binder, S., Aigner, K., Ettmayer, P., Guillou, A., Debuigne, J., and Groboth, G. Solid state properties of group IVb carbonitrides. J. Alloys and Compounds, 1995, 217, 137-147.
39. Gekonde, H. O. and Subramanian, S. V. Tribology of tool-chip interface and tool wear mechanisms. Surf. and Coatings Technol., 2002, 149, 151-160.
40. Jawahir, I. S. and Van Luttervelt, C. A. Recent developments in chip control research and applications. Ann. CIRP, 1993, 42(2), 659-693.