Strain gradient plasticity analysis of transformation induced plasticity in multiphase steels

International Journal of Solids and Structures

Volumn 45, Issue 20, 2008, Pages 5397-5418

  Mazzoni Leduc, L ^a   Pardoen, T ^b   Massart, T J ^a  

^a UNIVERSITÉ LIBRE DE BRUXELLES   (Belgium)

^b UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

Author keywords

Computational homogenization; Strain gradient plasticity; Strain induced martensitic transformation; TRIP assisted steels

Indexed keywords

AUSTENITE; AUSTENITIC TRANSFORMATIONS; BOUNDARY CONDITIONS; BOUNDARY VALUE PROBLEMS; CHLORINE COMPOUNDS; ELASTICITY; FERRITE; GRADIENT METHODS; IMPACT RESISTANCE; INCLUSIONS; MARTENSITE; MATRIX ALGEBRA; PLASTIC DEFORMATION; PLASTICITY; STEEL METALLOGRAPHY; STRENGTHENING (METAL); TITRATION; TWO DIMENSIONAL; WEAR RESISTANCE;

AUSTENITIC; BOUNDARY CONDITIONING; CELL MODELING; COMPUTATIONAL HOMOGENIZATION; DAMAGE RESISTANCE; FERRITIC MATRIX; GEOMETRICAL PARAMETERS; HARD INCLUSIONS; HIGHER-ORDER; MARTENSITE PHASES; MULTI-PHASE STEELS; PARAMETER SETTINGS; PLASTIC ACCOMMODATION; PLASTIC STRAIN GRADIENTS; PLASTIC STRAINING; POTENTIAL IMPACTS; RETAINED AUSTENITE; SINGLE PARAMETER; STRAIN GRADIENT EFFECTS; STRAIN GRADIENT PLASTICITY; STRAIN GRADIENT PLASTICITY THEORY; STRAIN INDUCED MARTENSITIC TRANSFORMATION; STRESS STATES; TRANSFORMATION INDUCED PLASTICITY; TRANSFORMATION STRAINS; TRIP-ASSISTED STEELS;

PLASTICS;

EID: 48949102761     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2008.05.025     Document Type: Article

References (77)

1. Abu Al-Rub R.K. Prediction of micro and nanoindentation size effect from conical or pyramidal indentation. Mechanics of Materials 39 (2007) 787-802
2. Aifantis E.C. On the microstructural origin of certain inelastic models. Transactions of the ASME. Journal of Engineering Materials and Technology 106 4 (1984) 326-330
3. Aifantis K.E., and Ngan A.H.W. Modeling dislocation-grain boundary interactions through gradient plasticity and nanoindentation. Materials Science and Engineering: A 459 1-2 (2007) 251-261
4. André N., Coulombier M., De Longueville V., Fabrègue D., Gets T., Gravier S., Pardoen T., and Raskin J.-P. Microfabrication-based nanomechanical laboratory for testing the ductility of submicron aluminium films. Microelectronic Engineering 84 11 (2007) 2714-2718
5. Ball J.M., and James R.D. Fine phase mixtures as minimizers of energy. Archive for Rational Mechanics and Analysis 100 1 (1987) 13-52
6. Balint D.S., Deshpande V.S., Needleman A., and Van der Giessen E. Size effects in uniaxial deformation of single and polycrystals: a discrete dislocation plasticity analysis. Modelling and Simulation in Materials Science and Engineering 14 (2006) 409-422
7. Bhattacharya K. Comparison of the geometrically nonlinear and linear theories of martensitic transformation. Continuum Mechanics and Thermodynamics 5 3 (1993) 205-242
8. Borg U., Niordson C.F., Fleck N.A., and Tvergaard V. A viscoplastic strain gradient analysis of materials with voids or inclusions. International Journal of Solids and Structures 43 16 (2006) 4906-4916
9. de Borst R., and Mühlhaus H.B. Gradient-dependent plasticity: formulation and algorithmic aspects. International Journal for Numerical Methods in Engineering 35 (1992) 521-539
10. de Borst R., and Pamin J. Some novel developments in finite element procedures for gradient-dependent plasticity. International Journal for Numerical Methods in Engineering 39 (1996) 2477-2505
11. Chen S.H., Liu L., and Wang T.C. Small scale, grain size and substrate effects in nano-indentation experiment of film substrate systems. International Journal of Solids and Structures 44 13 (2007) 4492-4504
12. Cherkaoui M., Berveiller M., and Sabar H. Micromechanical modeling of martensitic transformation-induced plasticity (TRIP) in austenitic single crystals. International Journal of Plasticity 14 7 (1998) 597-626
13. Dan W.J., Zhang W.G., Li S.H., and Lin Z.Q. Finite element simulation on strain-induced martensitic transformation effects in TRIP steel sheet forming. Computational Materials Science 39 3 (2007) 593-599
14. Dan W.J., Zhang W.G., Li S.H., and Lin Z.Q. A model for strain-induced martensitic transformation of TRIP steel with strain rate. Computational Materials Science 40 1 (2007) 101-107
15. Dan W.J., Li S.H., Zhang W.G., and Lin Z.Q. The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel. Materials and Design 29 3 (2008) 604-612
16. Delannay L., Jacques P., and Pardoen T. Modelling of the plastic flow of trip-aided multiphase steel based on an incremental mean-field approach. International Journal of Solids and Structures 45 6 (2008) 1825-1843
17. Delincé M., Jacques P.J., and Pardoen T. Separation of size-dependent strengthening contributions in fine-grained Dual Phase steels by nanoindentation. Acta Materialia 54 12 (2006) 3395-3404
18. Diani J.M., Sabar H., and Berveiller M. Micromechanical modelling of the transformation induced plasticity (TRIP) phenomenon in steels. International Journal of Engineering Science 33 13 (1995) 1921-1934
19. Dong M., and Schmauder S. Modeling of metal matrix composites by a self-consistent embedded cell model. Acta Materialia 44 6 (1996) 2465-2478
20. Ekh M., Grymer M., Runesson K., and Svedberg T. Gradient crystal plasticity as part of the computational modelling of polycrystals. International Journal for Numerical Methods in Engineering 72 2 (2007) 197-220
21. Engelen R.A.B., Fleck N.A., Peerlings R.H.J., and Geers M.G.D. An evaluation of higher-order plasticity theories for predicting size effects and localisation. International Journal of Solids and Structures 43 7-8 (2006) 1857-1877
22. Evers L.P., Brekelmans W.A.M., and Geers M.G.D. Scale dependent crystal plasticity framework with dislocation density and grain boundary effects. International Journal of Solids and Structures 41 18-19 (2004) 5209-5230
23. Fischer F.D., and Reisner G. A criterion for the martensitic transformation of a microregion in an elastic plastic material. Acta Materialia 46 6 (1998) 2095-2102
24. Fischer F.D., Reisner G., Werner E., Tanaka K., Cailletaud G., and Antretter T. A new view on transformation induced plasticity (TRIP). International Journal of Plasticity 16 7-8 (2000) 723-748
25. Fleck N.A., Muller G.M., Ashby M.F., and Hutchinson J.W. Strain gradient plasticity: theory and experiment. Acta Metallurgica et Materialia 42 2 (1994) 475-487
26. Fleck N.A., and Hutchinson J.W. Strain gradient plasticity. Advances in Applied Mechanics 33 (1997) 295-361
27. Fleck N.A., and Hutchinson J.W. A reformulation of strain gradient plasticity. Journal of the Mechanics and Physics of Solids 49 (2001) 2245-2271
28. Fleck N.A., Ashby M.F., and Hutchinson J.W. The role of geometrically necessary dislocations in giving material strengthening. Scripta Materialia 48 2 (2003) 179-183
29. Fredriksson P., and Gudmundson P. Size-dependent yield strength of thin films. International Journal of Plasticity 21 9 (2005) 1834-1854
30. Furnémont, Q., 2003. The Micromechanics of TRIP-Assisted Multiphase Steels. Ph.D. thesis, Université catholique de Louvain, Louvain-la-Neuve.
31. Ganghoffer J.F., and Simonsson K. A micromechanical model of the martensitic transformation. Mechanics of Materials 27 3 (1998) 125-144
32. Gudmundson P. A unified treatment of strain gradient plasticity. Journal of the Mechanics and Physics of Solids 52 6 (2004) 1379-1406
33. Huang D.W. Size-dependent response of ultra-thin films with surface effects. International Journal of Solids and Structures 45 2 (2007) 568-579
34. Iwamoto T., and Tsuta T. Computational simulation of the dependence of the austenitic grain size on the deformation behavior of TRIP steels. International Journal of Plasticity 16 7-8 (2000) 791-804
35. Jacques P.J., Furnémont Q., Pardoen T., and Delannay F. On the role of martensitic transformation on damage and cracking resistance in TRIP-assisted multiphase steels. Acta Materialia 49 1 (2001) 139-152
36. Jacques P.J. Transformation-induced plasticity for high strength formable steels. Current Opinion in Solid State and Material Science 8 3-4 (2004) 259-265
37. Jacques P.J., Furnémont Q., Lani F., Pardoen T., and Delannay F. Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta Materialia 55 11 (2007) 3681-3693
38. Janssen P.J.M., de Keijser T.H., and Geers M.G.D. An experimental assessment of grain size effects in the uniaxial straining of thin Al sheet with a few grains across the thickness. Materials Science and Engineering: A 419 1-2 (2006) 238-248
39. Jimenez-Melero E., van Dijk N.H., Zhao L., Sietsma J., Offerman S.E., Wright J.P., and van der Zwaag S. Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels. Acta Materialia 55 20 (2007) 6713-6723
40. Keralavarma S.M., and Benzerga A.A. A discrete dislocation analysis of strengthening in bilayer thin films. Modelling and Simulation in Materials Science and Engineering 15 (2007) 239-254
41. Kizler P., and Schmauder S. Simulation of the nanoindentation of hard metal carbide layer systems the case of nanostructured ultra-hard carbide layer systems. Computational Materials Science 39 1 (2007) 205-213
42. Kouznetsova V.G., Brekelmans W.A.M., and Baaijens F.P.T. An approach to micro-macro modeling of heterogeneous materials. Computational mechanics 27 1 (2001) 37-48 Eindhoven University of Technology
43. Lacroix, G., Pardoen, T., Jacques, P.J., 2008. On the fracture toughness of TRIP-assisted multiphase steels. Acta Materialia, doi:10.1016/j.actamat.2008.04.035.
44. Lani F., Furnémont Q., Van Rompaey T., Delannay F., Jacques P.J., and Pardoen T. Multiscale mechanics of TRIP-assisted multiphase steels: II. Micromechanical modelling. Acta Materialia 55 11 (2007) 3695-3705
45. Leblond J.B., Mottet G., and Devaux J.C. A theoretical and numerical approach to the plastic behaviour of steels during phase-transformation - II. Study of classical plasticity for ideal-plastic phases. Journal of the Mechanics and Physics of Solids 34 4 (1986) 411432
46. Levitas V.I., and Stein E. Simple micromechanical model of thermoelastic martensitic transformations. Mechanics Research Communications 24 3 (1997) 309-318
47. Levitas V.I., Idesman A.V., and Olson G.B. Continuum modeling of strain-induced martensitic transformation at shear-band intersections. Acta Materialia 47 1 (1998) 219-233
48. Levitas V.I. Thermomechanical theory of martensitic phase transformations in inelastic materials. International Journal of Solids and Structures 35 9 (1998) 889-940
49. Liu X., and Hu G. A continuum micromechanical theory of overall plasticity for particulate composites including particle size effect. International Journal of Plasticity 21 4 (2005) 777-799
50. Liu M.X., Ma F., Huang P., Zhang J.M., and Xu K.W. Scale dependent plastic deformation of nanomultilayers with competitive effects of interphase boundary and grain boundary. Materials Science and Engineering: A (2007) 10.1016/j.msea2007.05.040
51. Ma A., Roters F., and Raabe D. A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations. Acta Materialia 54 8 (2006) 2169-2179
52. Marketz F., and Fischer F.D. A mesoscale study on the thermodynamic effect of stress on martensitic transformation. Metallurgical and Materials Transactions A 26 2 (1995) 267-278
53. Mindlin R.D. Micro-Structure in linear elasticity. Archive for Rational Mechanics and Analysis 16 1 (1964) 5178
54. Nicola L., Van der Giessen E., and Needleman A. Discrete dislocation analysis of size effects in thin films. Journal of Applied Physics 93 (2003) 5920-5928
55. Niordson C.F., and Tvergaard V. Nonlocal plasticity effects on the tensile properties of a metal matrix composite. European Journal of Mechanics A/Solids 20 2 (2001) 601-613
56. Niordson C.F. Strain gradient plasticity effects in whisker-reinforced metals. Journal of the Mechanics and Physics of Solids 51 10 (2003) 1863-1883
57. Niordson C.F., and Hutchinson J.W. Non-uniform plastic deformation of micron scale objects. International Journal for Numerical Methods in Engineering 56 (2003) 961-975
58. Olson G.B., and Cohen M. Kinetics of strain-induced martensitic nucleation. Metallurgical and Materials Transactions A 6 3 (1975) 791-795
59. Papatriantafillou I., Agoras M., Aravas N., and Haidemenopoulos G. Constitutive modeling and finite element methods for TRIP steels. Computer Methods in Applied Mechanics and Engineering 195 37-40 (2006) 5094-5114
60. Peerlings R.J.H. On the role of moving elasticplastic boundaries in strain gradient plasticity. Modelling and Simulation in Materials Science and Engineering 15 (2007) S109-S120
61. Polizzotto C. Strain-gradient elastic-plastic material models and assessment of the higher order boundary conditions. European Journal of Mechanics A/Solids 26 2 (2007) 189-211
62. Radmilovic V., Kilaas R., Dahmen U., and Shiflet G.J. Structure and morphology of S-phase precipitates in aluminum. Acta Materialia 47 15-16 (1999) 3987-3997
63. Reisner G., Werner E.A., and Fischer F.D. Micromechanical modeling of martensitic transformation in random microstructures. International Journal of Solids and Structures 35 17 (1998) 2457-2473
64. Serri J., Martiny M., and Ferron G. Finite element analysis of the effects of martensitic phase transformation in TRIP steel sheet forming. International Journal of Mechanical Sciences 47 6 (2005) 884-901
65. Šiška F., Forest S., and Gumbsch P. Simulations of stress strain heterogeneities in copper thin films: Texture and substrate effects. Computational Materials Science 39 1 (2007) 137-141
66. Stölken J.S., and Evans A.G. A microbend test method for measuring the plasticity length scale. Acta Materialia 46 14 (1998) 5109-5115
67. Stringfellow R.G., Parks D.M., and Olson G.B. A constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels. Acta Metallurgia et Materialia 40 7 (1992) 1703-1716
68. Tang H., Schwarz K.W., and Espinosa H.D. Dislocation escape-related size effects in single-crystal micropillars under uniaxial compression. Acta Materialia 55 5 (2007) 1607-1616
69. Tjahjanto D.D., Suiker A.S.J., Turteltaub S., Rivera Diaz del Castillo P.E.J., and van der Swaag S. Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters. Computational Materials Science 41 (2007) 107-116
70. Tomita Y., and Iwamoto T. Constitutive modeling of TRIP steel and its application to the improvement of the mechanical properties. International Journal of Mechanical Sciences 37 12 (1995) 1295-1305
71. Toupin R.A. Elastic materials with couple-stresses. Archive for Rational Mechanics and Analysis 11 1 (1962) 385-414
72. Turteltaub S., and Suiker A.S.J. Grain size effects in multiphase steels assisted by transformation-induced plasticity. International Journal of Solids and Structures 43 24 (2006) 7322-7336
73. Uchic M.D., Dimiduk D.M., Florando J.N., and Nix W.D. Sample dimensions influence strength and crystal plasticity. Science 305 5686 (2004) 986-989
74. Van Rompaey T., Lani F., Jacques P.J., Blanpain B., Wollants P., and Pardoen T. Three-dimensional computational-cell modeling of the micromechanics of the martensitic transformation in transformation-induced-plasticity-assisted multiphase steels. Metallurgical and Materials Transactions A 37 1 (2006) 99-107
75. Weschler M.S., Lieberman D.S., and Read T.A. On the theory of the formation of martensite. Transactions of AIME 197 (1953) 1503-1515
76. Wei Z., Yuhua W., Ning L., Wenling X., and Shanhua W. Directional precipitation of carbides induced by γ / varepsilon interfaces in an FeMnSiCrNiC alloy aged after deformation at different temperature. Materials Science and Engineering: A 459 1-2 (2007) 324-329
77. Yang B., and Vehoff H. Dependence of nanohardness upon indentation size and grain size: a local examination of the interaction between dislocations and grain boundaries. Acta Materialia 55 3 (2007) 849-856