The role of HEMA in one-step self-etch adhesives

Dental Materials

Volumn 24, Issue 10, 2008, Pages 1412-1419

  Van Landuyt, K L ^a   Snauwaert, J ^b   Peumans, M ^a   De Munck, J ^a   Lambrechts, P ^a   Van Meerbeek, B ^a  

^a CATHOLIC UNIVERSITY OF LEUVEN   (Belgium)

^b UNIVERSITY OF LEUVEN   (Belgium)

Author keywords

Adhesion; Droplets; HEMA; Hydrophilic; One step self etch adhesive; Osmosis; Phase separation

Indexed keywords

ACETONE; ADHESIVES; BOND STRENGTH (MATERIALS); CHEMICAL REACTIONS; CONCENTRATION (PROCESS); DROP FORMATION; DROPS; ENAMELS; FLUID MECHANICS; ISOMERS; MECHANICAL PROPERTIES; MONOMERS; PHASE INTERFACES; PHASE MODULATION; PHASE SEPARATION; POLYMERS; SECONDARY EMISSION; SEPARATION; STRENGTH OF MATERIALS;

2-HYDROXY ETHYL METHACRYLATE; ADHESION; ADHESIVE FORMULATION; ADHESIVE INTERFACES; ADHESIVE LAYERS; BENEFICIAL EFFECTS; BOND STRENGTHS; BONDING EFFECTIVENESS; DROPLETS; GLASS PLATES; H-BOND STRENGTH; HEMA; HIGHER CONCENTRATIONS; HYDROPHILIC; LOW-MOLECULAR WEIGHT; MICRO-TENSILE BOND STRENGTH; ONE-STEP SELF-ETCH ADHESIVE; OSMOSIS; PHYSICO-MECHANICAL PROPERTIES; POLYMERIZATION CONVERSION; SELF-ETCH; SELF-ETCH ADHESIVES; SEM AND TEM;

BOND STRENGTH (CHEMICAL);

2 HYDROXYETHYL METHACRYLATE; 4 METHACRYLOXYETHYLTRIMELLITIC ACID; 4-METHACRYLOXYETHYLTRIMELLITIC ACID; ACETONE; DENTIN BONDING AGENT; METHACRYLIC ACID DERIVATIVE; ORGANOPHOSPHATE; POLYMER; RESIN CEMENT; SOLVENT; TRICARBOXYLIC ACID; UNCLASSIFIED DRUG; WATER;

ARTICLE; CHEMISTRY; DENTAL BONDING; DENTIN; ENAMEL; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; PHASE TRANSITION; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TENSILE STRENGTH; TIME; TRANSMISSION ELECTRON MICROSCOPY; ULTRASTRUCTURE;

ACETONE; DENTAL BONDING; DENTAL ENAMEL; DENTIN; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; MICROSCOPY, ELECTRON, TRANSMISSION; PHASE TRANSITION; PHOSPHORIC ACID ESTERS; POLYMERS; RESIN CEMENTS; SOLVENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TENSILE STRENGTH; TIME FACTORS; TRICARBOXYLIC ACIDS; WATER;

EID: 48949092316     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.02.018     Document Type: Article

References (34)

1. Van Landuyt K.L., Snauwaert J., De Munck J., Peumans M., Yoshida Y., Poitevin A., et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials 28 (2007) 3757-3785
2. Toledano M., Osorio R., Moreira M.A., Cabrerizo-Vilchez M.A., Gea P., Tay F.R., et al. Effect of the hydration status of the smear layer on the wettability and bond strength of a self-etching primer to dentin. Am J Dent 17 (2004) 310-314
3. Rosales J.I., Marshall G.W., Marshall S.J., Watanabe L.G., Toledano M., Cabrerizo M.A., et al. Acid-etching and hydration influence on dentin roughness and wettability. J Dent Res 78 (1999) 1554-1559
4. Nakabayashi N., and Takarada K. Effect of HEMA on bonding to dentin. Dent Mater 8 (1992) 125-130
5. Nakaoki Y., Nikaido T., Pereira P.N., Inokoshi S., and Tagami J. Dimensional changes of demineralized dentin treated with HEMA primers. Dent Mater 16 (2000) 441-446
6. Van Landuyt K., De Munck J., Snauwaert J., Coutinho E., Poitevin A., Yoshida Y., et al. Monomer-solvent phase separation in one-step self-etch adhesives. J Dent Res 84 (2005) 183-188
7. Toledano M., Osorio R., de Leonardi G., Rosales-Leal J.I., Ceballos L., and Cabrerizo-Vilchez M.A. Influence of self-etching primer on the resin adhesion to enamel and dentin. Am J Dent 14 (2001) 205-210
8. Moszner N., Salz U., and Zimmermann J. Chemical aspects of self-etching enamel-dentin adhesives: a systematic review. Dent Mater (2005)
9. Sandberg E., Bergenholtz G., Eklund C., and Dahlgren U.I. HEMA bound to self-protein promotes auto-antibody production in mice. J Dent Res 81 (2002) 633-636
10. Lonnroth E.C., Wellendorf H., and Ruyter E. Permeability of different types of medical protective gloves to acrylic monomers. Eur J Oral Sci 111 (2003) 440-446
11. Goossens A. Contact allergic reactions on the eyes and eyelids. Bull Soc Belge Ophtalmol (2004) 11-17
12. Tay F.R., King N.M., Chan K.M., and Pashley D.H. How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously?. J Adhes Dent 4 (2002) 255-269
13. Phrukkanon S., Burrow M.F., and Tyas M.J. The effect of dentine location and tubule orientation on the bond strengths between resin and dentine. J Dent 27 (1999) 265-274
14. Yoshiyama M., Matsuo T., Ebisu S., and Pashley D. Regional bond strengths of self-etching/self-priming adhesive systems. J Dent 26 (1998) 609-616
15. Perdigao J., Lambrechts P., Van Meerbeek B., Vanherle G., and Lopes A.L. Field emission SEM comparison of four postfixation drying techniques for human dentin. J Biomed Mater Res 29 (1995) 1111-1120
16. Van Meerbeek B., Yoshida Y., Lambrechts P., Vanherle G., Duke E.S., Eick J.D., et al. A TEM study of two water-based adhesive systems bonded to dry and wet dentin. J Dent Res 77 (1998) 50-59
17. Tay F.R., Pashley D.H., and Yoshiyama M. Two modes of nanoleakage expression in single-step adhesives. J Dent Res 81 (2002) 472-476
18. Munksgaard E.C., and Asmussen E. Bond strength between dentin and restorative resins mediated by mixtures of HEMA and glutaraldehyde. J Dent Res 63 (1984) 1087-1089
19. Doi J., Itota T., Torii Y., Nakabo S., and Yoshiyama M. Effect of 2-hydroxyethyl methacrylate pre-treatment on micro-tensile bond strength of resin composite to demineralized dentin. J Oral Rehabil 31 (2004) 1061-1067
20. Hussain L.A., Dickens S.H., and Bowen R.L. Shear bond strength of experimental methacrylated beta-cyclodextrin-based formulations. Biomaterials 26 (2005) 3973-3979
21. Pilo R., Cardash H.S., Oz-Ari B., and Ben Amar A. Effect of preliminary treatment of the dentin surface on the shear bond strength of resin composite to dentin. Oper Dent 26 (2001) 569-575
22. Nakabayashi N., Watanabe A., and Gendusa N.J. Dentin adhesion of "modified" 4-META/MMA-TBB resin: function of HEMA. Dent Mater 8 (1992) 259-264
23. Biernat M., and Rokicki G. Oxygen inhibition of photopolymerization processes and methods of its suppression. Polimery 50 (2005) 633-645
24. Nunes T.G., Ceballos L., Osorio R., and Toledano M. Spatially resolved photopolymerization kinetics and oxygen inhibition in dental adhesives. Biomaterials 26 (2005) 1809-1817
25. Tay F.R., Pashley D.H., Suh B.I., Carvalho R.M., and Itthagarun A. Single-step adhesives are permeable membranes. J Dent 30 (2002) 371-382
26. Van Landuyt K.L., Snauwaert J., De Munck J., Coutinho E., Poitevin A., Yoshida Y., et al. Origin of interfacial droplets with one-step adhesives. J Dent Res 86 (2007) 739-744
27. Gauthier M.A., Stangel I., Ellis T.H., and Zhu X.X. Oxygen inhibition in dental resins. J Dent Res 84 (2005) 725-729
28. Jacobsen T., and Soderholm K.J. Some effects of water on dentin bonding. Dent Mater 11 (1995) 132-136
29. Wang Y., and Spencer P. Continuing etching of an all-in-one adhesive in wet dentin tubules. J Dent Res 84 (2005) 350-354
30. Zheng L., Pereira P.N., Nakajima M., Sano H., and Tagami J. Relationship between adhesive thickness and microtensile bond strength. Oper Dent 26 (2001) 97-104
31. Yamamoto A., Tsubota K., Takamizawa T., Kurokawa H., Rikuta A., Ando S., et al. Influence of light intensity on dentin bond strength of self-etch systems. J Oral Sci 48 (2006) 21-26
32. Asmussen E., and Peutzfeldt A. Influence of selected components on crosslink density in polymer structures. Eur J Oral Sci 109 (2001) 282-285
33. Odian G. Principles of polymerization (2004), Willey Interscience, New York
34. Tay F.R., and Pashley D.H. Have dentin adhesives become too hydrophilic?. J Can Dent Assoc 69 (2003) 726-731