The effect of tool edge radius on the contact phenomenon of tool-based micromachining

International Journal of Machine Tools and Manufacture

Volumn 48, Issue 12-13, 2008, Pages 1395-1407

  Woon, K S ^a   Rahman, M ^a   Neo, K S ^a   Liu, K ^b  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b SINGAPORE INSTITUTE OF MANUFACTURING TECHNOLOGY   (Singapore)

Author keywords

Contact phenomenon; Micromachining; Stick slide; Tool edge radius effect

Indexed keywords

COMPOSITE MICROMECHANICS; CUTTING TOOLS; MICROMACHINING; SEPARATION; STRESS CONCENTRATION;

ARBITRARY LAGRANGIAN-EULERIAN (ALE); CONTACT LENGTH; CONTACT STRESS DISTRIBUTIONS; FE MODELING; FLOW STAGNATION; FRICTIONAL CONTACTS; MATERIAL DEFORMATIONS; STAGNATION POINTS; STRESS CRITERION; TOOL EDGE RADIUS; WIDE-RANGE;

MACHINING;

EID: 48549093423     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2008.05.001     Document Type: Article

References (48)

1. Takács M., Verö B., and Mészáros I. Micromilling of metallic materials. Journal of Materials Processing Technology 138 (2003) 152-155
2. Shaw M.C. Metal Cutting Principles. second ed. (2005), Oxford University Press, New York
3. Masuko M. Fundamental researches on the metal cutting. I. A new analysis of cutting force. Transactions of the Society of Mechanical Engineers (Japan) 19 (1953) 32-39
4. Albrecht P. New developments in the theory of the metal-cutting process. Part I. The ploughing process in metal cutting. Transactions of the ASME (1960) 348-358
5. Albrecht P. New developments in the theory of the metal-cutting process. Part I. The ploughing process in metal cutting. Journal of Engineering for Industry, Transactions of the ASME (1960) 348-358
6. K. Nakayama, K. Tamura, Size effect in metal-cutting force, Journal of Engineering of Industry, Transactions of the ASME February (1968) 119-126.
7. Basuray P.K., Misra B.K., and Lal G.K. Transition from ploughing to cutting during machining with blunt tools. Wear 43 (1977) 341-349
8. Moriwaki T., and Okuda K. Machinability of copper in ultra-precision micro diamond cutting. Annals of the CIRP 38/1 (1989) 115-118
9. Fang F.Z., Wu H., and Liu Y.C. Modelling and experimental investigation on nanometric cutting of monocrystalline silicon. International Journal of Machine Tools and Manufacture 45 (2005) 1681-1686
10. Li X.P., Cai M.B., Liu K., and Rahman M. Characteristics of ductile mode chip formation in nanoscale cutting of brittle materials. International Journal of Abrasive Technology 1/1 (2007) 37-58
11. Woon K.S., Rahman M., Fang F.Z., Neo K.S., and Liu K. Investigations of tool edge radius effect in micromachining: a FEM simulation approach. Journal of Materials Processing Technology 195 (2008) 204-211
12. Yuan Z.J., Zhou M., and Dong S. Effect of diamond tool sharpness on minimum cutting thickness and cutting surface integrity in ultraprecision. Journal of Materials Processing Technology 62 (1996) 327-330
13. W.B. Palmer, R.C.K. Yeo, Metal flow near the tool point during orthogonal cutting with a blunt tool, Proceedings of the Fourth International Machine Tool Design and Research Conference, 1963, pp. 61-71.
14. Astakhov V.P. Tribology of Metal Cutting vol. 52 (2006), (Tribology and Interface Engineering), Elsevier Science, New York
15. Mallock A. The action of cutting tools. Proceedings of the Royal Society of London 33 (1881-82) 127-139
16. Zorev N.N. Interrelationship between shear process occurring along the tool face and on the shear plane in metal cutting. International Research in Production Engineering, ASME (1963) 42-49
17. Zorev N.N. Metal Cutting Mechanics (1966), Pergamon Press, Oxford
18. Poletika M.F. Contact Loads on Tool Faces (1969), Machinostronie, Moscow in Russian
19. Friedman M.Y., and Lenz E. Investigation of the tool-chip contact length in metal cutting. International Journal of Machine Tool Design and Research 10 (1970) 401-416
20. Usui E., and Takeyama H. The effect of tool-chip contact area in metal machining. Transactions of the ASME (1958) 1089-1096
21. Usui E., and Takeyama H. A photoelastic analysis of machining stresses. Transactions of the ASME (1960) 303-308
22. Chandrasekaran H., and Kapoor D.V. Photoelastic analysis of tool-chip interface stresses. Transactions of the ASME (1965) 495-502
23. Kato S., Yamaguchi K., and Yamada M. Stress distribution at the interface between tool and chip in machining. Transactions of the ASME (1972) 683-689
24. Amini E. Photoelastic analysis of stresses and forces in steady cutting. The Journal of Strain Analysis for Engineering Design 3 (1968) 206-213
25. Barrow G., Graham W., Kurimoto T., and Leong Y.F. Determination of rake face stress distributions in orthogonal machining. International Journal of Machine Tool Design and Research 22 (1982) 75-85
26. Bagchi A., and Wright P.K. Stress analysis in machining with the use of sapphire tools. Proceedings of the Royal Society of London: Series A 409 (1987) 99-113
27. Arsecularatne J.A. On tool-chip interface stress distributions, ploughing force and size effect in machining. International Journal of Machine Tools and Manufacture 37 (1997) 885-899
28. Toropov A., and Ko S.-L. Prediction of tool-chip contact length using a new slide-line solution for orthogonal cutting. International Journal of Machine Tools and Manufacture 43 (2003) 1209-1215
29. Son S.M., Lim H.S., and Ahn J.H. Effects of the friction coefficient on the minimum cutting thickness in micro cutting. International Journal of Machine Tools and Manufacture 45 (2005) 529-535
30. Roth R.N., and Oxley P.L.B. Slip-line field analysis for orthogonal machining based upon experimental flow field. Journal of Mechanical Engineering Science 14 (1972) 86-97
31. Astakhov V.P. Metal Cutting Mechanics (1998), CRC Press, Boca Raton, US
32. Doyle E.D., Horne J.G., and Tabor D. Frictional interactions between chip and rake face in continuous chip formation. Proceeding of the Royal Society of London: Series A 366 (1987) 173-183
33. Sutter G. Chip geometries during high-speed machining for orthogonal cutting conditions. International Journal of Machine Tools and Manufacture 45 (2005) 719-726
34. Trent E.M. Metal Cutting (1977), Butterworths, London
35. Childs T.H.C., Maekawa K., Obikawa T., and Yamane Y. Metal Machining: Theory and Applications (2000), Arnold, London
36. Williams J.E., Smart E.F., and Milner D.R. The metallurgy of machining. Metallurgia 81 (1970) 3-10
37. Jaspers S.P.F.C., and Dautzenberg J.H. Material behavior in metal cutting: strains, strain rates and temperature in chip formation. Journal of Materials Processing Technology 43 (2002) 1-13
38. T. Özel, E. Zeren, Finite element method simulation of machining of AISI 1045 steel with a round edge cutting tool, in: Proceedings of the Eighth CIRP International Workshop on Modeling of Machining Operations, Chemnitz, Germany, 2005, pp. 533-541.
39. E. Stein, R. de Borst, T.J.R. Hughes, Encyclopedia of Computational Mechanics, vol. 1: Fundamentals. Wiley, New York, 2004.
40. HKS Inc., Analysis User's Manual, version 6.4, ABAQUS Online Documentation, 2003.
41. G.R. Johnson, W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperature, in: Proceedings of the Seventh International Symposium on Ballistics, 1983, pp. 541-547.
42. Machado A.R., and Wallbank J. The effect of extremely low lubricant volumes in machining. Wear 210 (1997) 76-82
43. Iwata K., Osakado A., and Terasaka Y. Process modelling of orthogonal cutting by the rigid-plastic finite element method. Transactions of the ASME 106 (1984) 132-138
44. T. Shirakashi, E. Usui, Simulation analysis of orthogonal metal cutting mechanism, in: Proceedings of the International Conference of Production Engineering, Tokyo, 1974, pp. 535-540.
45. Radwan A.A. Investigation of secondary deformation zone and mean coefficient of friction during the machining of 5083-H34 aluminium alloy. Wear 101 (1985) 191-204
46. Komanduri R., and Brown R.H. On the mechanics of chip segmentation in machining. Transactions of the ASME 103 (1981) 33-51
47. J.C. Outeiro, V.P. Astakhov, The role of the relative tool sharpness in modelling of the cutting process, in: Proceedings of the Eighth CIRP International Workshop on Modeling of Machining Operations, Chemnitz, Germany, 2005, pp. 517-524.
48. Marinov V.R. Hybrid analytical-numerical solution for the shear angle in orthogonal metal cutting. Part II. Experimental verification. International Journal of Mechanical Sciences 43 (2001) 415-426