The effect of surface treatments on the fretting behavior of Ti-6Al-4V alloy

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 86, Issue 2, 2008, Pages 407-416

  Dalmiglio, Matteo ^a   Schaaff, Petra ^a   Holzwarth, Uwe ^a   Chiesa, Roberto ^b   Rondelli, Gianni ^c  

^a JOINT RESEARCH CENTRE   (Italy)

^b POLITECNICO DI MILANO   (Italy)

^c CNR   (Italy)

Author keywords

Fretting; Release; Surface treatment; Thin layer activation; Ti 6Al 4V; Titanium alloy

Indexed keywords

ALLOYS; ALUMINUM; CHEMICAL MODIFICATION; DEIONIZED WATER; ELECTRIC SPARKS; FRETTING CORROSION; HIP PROSTHESES; POLISHING; PROTON IRRADIATION; RADIOACTIVE TRACERS; REUSABILITY; SURFACE TREATMENT; SURFACES; VANADIUM ALLOYS;

ALLOY SURFACES; ANODIC SPARK DEPOSITION (ASD); BARREL POLISHING; CORROSION PROCESSES; CYCLIC DISPLACEMENTS; DOG-BONE; FATIGUE SAMPLES; FRETTING BEHAVIORS; FRETTING PADS; MATERIAL CHARACTERIZATIONS; MATERIAL RELEASE; POTENTIOSTATIC TESTS; SURFACE MODIFICATIONS; TI 6 AL 4V ALLOY; TI-6AL-4V; TOTAL HIP REPLACEMENT (THR);

TITANIUM ALLOYS;

ALLOY; LUBRICATING AGENT; TITANIUM; TRACER; WATER;

ARTICLE; ELECTROCHEMISTRY; FATIGUE; GEOMETRY; PROTON RADIATION; SURFACE PROPERTY;

ALLOYS; ALUMINUM; BIOCOMPATIBLE MATERIALS; SURFACE PROPERTIES; TITANIUM; VITALLIUM;

EID: 47949115244     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31034     Document Type: Article

References (43)

1. Bobyn JD, Tanzer M, Krygier JJ, Ariel CET, Brooks CE. Concerns with modularity in total hip arthroplasty, citation on advantages of modular design stems. Clin Orthop Relat Res 1994;298:27-36.
2. Urban RM, Gilbert JL, Jacobs JJ. Corrosion of modular titanium alloy stems in cementless hip replacement. In: Zardiackas LD, Kraay MJ, Freese HL, editors. Titanium, Niobium, Zirconium and Tantalum for Medical and Surgical Applications. ASTM STP 1471. West Conshohocken, PA: American Society for Testing and Materials; 2006. pp 215-224.
3. Brown SA, Simpson JP. Crevice and fretting corrosion of stainless-steel plates and screws. J Biomed Mater 1981;15:867-878.
4. Hoeppner DW, Chandrasekaran V. Fretting in orthopaedic implants: A review. Wear 1994;173:189-197.
5. Schramm M, Wirtz DC, Holzwarth U, Pitto RP. The Morse taper junction in modular revision hip replacement - A biomechanical and retrieval analysis. Biomed Tech 2000;45:105-109.
6. Schaaff P. The role of fretting damage in total hip arthroplasty with modular design hip joints - Evaluation of retrieval studies and experimental simulation methods. J Appl Biomater Biomech 2004;2:121-135.
7. Duisabeau L, Combrade P, Forest B. Environmental effect on fretting of metallic materials for orthopaedic implants. Wear 2004;256:805-816.
8. Barril S, Mischler S, Landolt D. Influence of fretting regimes on the tribocorrosion behaviour of Ti6Al4V in 0.9 wt % sodium chloride solution. Wear 2004;256:963-972.
9. Waterhouse RB. Fretting Corrosion. Oxford: Pergamon Press; 1972.
10. Brown SA, Flemming CAC, Kawalec JS, Placko HE, Vassaux C, Merritt K, Payer JH, Kraay MJ. Fretting corrosion accelerates crevice corrosion of modular hip tapers. J Appl Biomater 1995;6:19-26.
11. Gilbert JL, Jacobs JJ. The mechanical and electrochemical processes associated with taper fretting crevice corrosion: A review. In: Marlowe DE, Parr JE, Mayor MB, editors. Modularity of Orthopedic Implants. ASTM STP 1301. West Conshohocken, PA: American Society for Testing and Materials; 1979. pp 45-59.
12. Goldberg JR, Buckley CA, Jacobs JJ, Gilbert JL. Corrosion testing of modular hip implants. In: Marlowe DE, Parr JE, Mayor MB, editors. Modularity of Orthopedic Implants. ASTM STP 1301. West Conshohocken, PA: American Society for Testing and Materials; 1979. pp 157-176.
13. Waterhouse RB. Fretting fatigue. Int J Fatigue 1992;37:77-97.
14. Jastry M, Smith E. Wear particles of total joint replacements and their role in periprosthetic osteolysis. Curr Opin Rheumatol 1992;4:204-209.
15. Urban RM, Jacobs JJ, Gilbert JL, Rice SB, Jasty M, Bragdon CR, Galante JO. Characterization of solid products of corrosion generated by modular-head femoral stems of different designs and materials. In: Marlowe DE, Parr JE, Mayor MB, editors. Modularity of Orthopedic Implants.ASTM STP 1301. West Conshohocken, PA: American Society for Testing and Materials; 1997. pp 33-44.
16. Teoh SH. Fatigue of biomaterials: A review. Int J Fatigue 2000;22:825-837.
17. Clarke IC, Campell P, Kossovsky N. Debris-mediated osteolysis - A cascade phenomenon involving motion, wear, particulates, macrophage induction, and bone lyses. In: St. John KR, editor. Particulate Debris from Medical Implants: Mechanisms of Formation and Biological Consequences.ASTM STP 1144. West Conshohocken, PA: American Society for Testing and Materials; 1992. pp 7-26.
18. Bhambri SK, Gilbertson LN. Fretting corrosion fatigue study of modular joints in total hip replacements by accelerated in vitro testing. In: Marlowe DE, Parr JE, Mayor MB, editors. Modularity of Orthopedic Implants. ASTM STP 1301. West Conshohocken, PA: American Society for Testing and Materials; 1979. pp 146-156.
19. Lappalainen R, Santavirta SS. Potential of coatings in total hip replacement. Clin Orthop Relat Res N 2005;430:72-79.
20. Chu PK, Chen JY, Wang LP, Huang N. Plasma-surface modification of biomaterials. Mater Sci Eng R 2002;36:143-206.
21. Kurella K, Dahotre NB. Review paper: Surface modifications for bioimplants: The role of laser surface engineering. J Biomater Appl 2005;20:5-50.
22. Liu X, Chu PK, Ding C. Surface modification of titanium, titanium alloys and related materials for biomedical applications. Mater Sci Eng R 2004;47:49-121.
23. Flemming CAC, Brown SA, Payer JH. Mechanical testing for fretting corrosion of modular total hip tapers. In: Kambic HE, Yokobori AT Jr, editors. Biomaterials' Mechanical Properties. ASTM STP 1173. West Conshohocken, PA: American Society for Testing and Materials; 1994. pp 156-166.
24. Sabbioni E, Balls M. Use of cell cultures and nuclear and radioanalytical techniques for environmental, occupational, and biomedical metal toxicology research at the JRC-Ispra. In: Goldberg AM, Zutphen LFM, editors. Alternative Methods in Toxicology and The Life Sciences, Vol. 11 - The World Congress on Alternatives and Animal Use in the Life Sciences: Education, Research, Testing. New York, NY: Mary Ann Liebert; 1995. pp 101-108.
25. Sabbioni E, Pietra R, Serra MA, Fortaner S, Edel J, Minoia C. Application of nuclear, radiochemical and spectrochemical techniques in metal toxicology. J Trace Microprobe Tech 1993;11:217-233.
26. Scherge M, Pöhlmann K, Gervé A. Wear measurements using radionuclide-technique (RNT). Wear 2003;254:801-817.
27. Neumann W, Woelfli W, Heimgartner P, Streicher RM. Thin-layer activation of hip-joint prostheses for tribological tests. Nucl Instrum Methods B 1990;50:57-61.
28. Schaaff P, Horstmann W, Dalmiglio M, Holzwarth U. A compact fretting device for testing of biomaterials by means of thin layer activation. Wear 2006;261:527-539.
29. Ebramzadeh E, Billi F, Sangiorgio SN, Mattes S, Schmoelz W, Dorr L. Simulation of fretting wear at orthopaedic implant interfaces. J Biomech Eng 2005;127:357-363.
30. Schaaff P, Dalmiglio M, Holzwarth U. Frequency effect in fretting wear of Co-28Cr-6Mo versus Ti-6Al-4V implant alloys. J Biomed Mater Res Part B: Appl Biomater 2006;77:79-88.
31. ASTM Standard F136-98. Standard specification for wrought Ti-6Al-4V ELI (extra low interstitial) alloy for surgical implant applications. In: 1998 Annual Book of ASTM Standards, Vol 13.01. Metals Test Methods and Analytical Procedures. Philadelphia, PA: American Society for Testing and Materials; 1998; pp 18-20.
32. TiHard™ Process, Product Information, NanoSurfaces S.r.l., Cadriano di Ganarolo Emilia (BO), Italy; 2003.www.nanosurfaces.com.
33. Rosenberg HW. US Patent 5,185,075; 1993.
34. Wirtz GP, Brown SD, Kriven WM. Ceramic coating by anodic spark discharge. Mater Manufacturing Processes 1991;6:87-115.
35. Revie RW, Greene ND. Corrosion behaviour of surgical implant materials. I. Effect of sterilization. Corros Sci 1966;9:755-762.
36. Hoar TP, Mears DC. Corrosion-resistant alloys in chloride solutions: Materials for surgical implants. Proc R Soc A 1966;294:486-510.
37. ASTM Standard G5-94 (Reapproved 1999). Standard Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements. In: 1998 Annual Book of ASTM Standards, Section 3, Metal Test Methods and Analytical Procedures, Vol 03.02. West Conshohocken, PA: American Society for Testing and Materials; 1998. pp 54-64.
38. Bilonoga YL. Influence of the roughness of the contacting surfaces on the fretting fatigue life of joints of 65G steel. Sov Mater Sci 1985;21:282-283.
39. Dobromirski JM. Variables of fretting process: Are there 50 of them? In: Attia H-M, Waterhouse RB, editors. Standardization of Fretting Fatigue Test Methods and Equipment. ASTM STP 1159. Philadelphia: American Society for Testing and Materials; 1992. pp 60-66.
40. Waterhouse RB, Trowsdale AJ. Residual stress and surface roughness in fretting fatigue. J Phys D: Appl Phys A 1992;25:236-239.
41. Leadbeater G, Nobel B, Waterhouse RB. The fatigue of an aluminium alloy produced by fretting on a shot peened surface. In: Valluri SR, Taplin DMR, Ramarao P, Knott JF, Dueby R, editors. Advances in Fracture Research, Vol. 3. Oxford: Pergamon Press; 1984. pp 2125-2132.
42. Vingsbo O, Söderberg S. On fretting maps. Wear 1988;126:131-147.
43. Berthier Y, Vincent L, Godet M. Fretting fatigue and fretting wear. Tribol Int 1989;22:235-242.