A comparison of approximate versus exact geometrical representations of roughness for CFD calculations of cf and St

Journal of Turbomachinery

Volumn 130, Issue 2, 2008, Pages

  Bons, J P ^a   McClain, S T ^b   Wang, Z J ^c   Chi, X ^c   Shih, T I ^c  

^a Brigham Young University   (United States)

^b UNIVERSITY OF ALABAMA AT BIRMINGHAM   (United States)

^c Iowa State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FRICTION;

EID: 47949083811     PISSN: 0889504X     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2752190     Document Type: Article

References (41)

1. Bons, J. P., Taylor, R., McClain, S., and Rivir R. B., 2001, "The Many Faces of Turbine Surface Roughness," ASME J. Turbomach., 123(4), pp. 739-748.
2. Taylor, R. P., 1990, "Surface Roughness Measurements on Gas Turbine Blades," ASME J. Turbomach., 112(1), pp. 175-180.
3. Tarada, F., and Suzuki, M., 1993, "External Heat Transfer Enhancement to Turbine Blading due to Surface Roughness," ASME Paper No. 93-GT-74.
4. Blair, M. F., 1994, "An Experimental Study of Heat Transfer in a Large-Scale Turbine Rotor Passage," ASME J. Turbomach., 116(1), pp. 1-13.
5. Guo, S. M., Jones, T. V., Lock, G. D., and Dancer, S. N., 1998, "Computational Prediction of Heat Transfer to Gas Turbine Nozzle Guide Vanes With Roughened Surfaces," ASME J. Turbomach., 120(2), pp. 343-350.
6. Suder, K. L., Chima, R. V., Strazisar, A. J., and Roberts, W. B., 1995, "The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor Rotor," ASME J. Turbomach., 117, pp. 491-505.
7. Ghenaiet, A., Elder, R. L., and Tan, S. C., "Particles Trajectories through an Axial Fan and Performance Degradation due to Sand Ingestion," ASME Paper No. 2001-GT-497.
8. Schlichting, H., 1936, "Experimental Investigation of the Problem of Surface Roughness," Ing.-Arch., VII(1).
9. Nikuradse, J., 1933, "Laws for Flows in Rough Pipes," VDI-Forschungsh., 361.
10. Cebeci, T., and Chang, K. C., 1978, "Calculation of Incompressible Rough-Wall Boundary Layer Flows," AIAA J., 16(7), pp. 730-735.
11. Boyle, R. J., 1994, "Prediction of Surface Roughness and Incidence Effects on Turbine Performance," ASME J. Turbomach., 116, pp. 745-751.
12. Aupoix, B., and Spalart, P. R., 2002, "Extensions of the Spalart-Allmaras Turbulence Model to Account for Wall Roughness," ONERA Technical Report No. TP 2002-173.
13. Simpson, R. L., 1973, "A Generalized Correlation of Roughness Density Effects on the Turbulent Boundary Layer," AIAA J., 11, pp. 242-244.
14. Sigal, A., and Danberg, J., 1990, "New Correlation of Roughness Density Effect on the Turbulent Boundary Layer," AIAA J., 28(3), pp. 554-556.
15. Bons, J. P., 2002, "St and Cf Augmentation for Real Turbine Roughness With Elevated Freestream Turbulence," ASME J. Turbomach., 124(4), pp. 632-644.
16. Taylor, R. P., 1983, "A Discrete Element Prediction Approach for Turbulent Flow Over Rough Surfaces," Ph.D. dissertation, Mississippi State University, Mississippi State, MS.
17. Finson, M. L., 1982, "A Model for Rough Wall Turbulent Heating and Skin Friction," AIAA Paper No. 82-0199.
18. Adams, J. C., and Hodge, B. K., 1971, "The Calculation of Compressible Transitional Turbulent and Relaminarizational Boundary Layers over Smooth and Rough Surfaces Using an Extended Mixing-Length Hypothesis," AIAA Paper No. 77-682, (1977).
19. Lin, T. C., and Bywater, R. J., 1980, "The Evaluation of Selected Turbulence Models for High-Speed Rough-Wan Boundary Layer Calculations," AIAA Paper No. 80-0132.
20. McClain, S. T., Hodge, B. K., and Bons, J. P., 2004, "Predicting Skin Friction and Heat Transfer for Turbulent Flow over Real Gas-Turbine Surface Roughness Using the Discrete-Element Method," ASME J. Turbomach., 126, pp. 259-267.
21. Bogard, D. G., Schmidt, D. L., and Tabbita, M., 1998, "Characterization and Laboratory Simulation of Turbine Airfoil Surface Roughness and Associated Heat Transfer," ASME J. Turbomach., 120(2), pp. 337-342.
22. Barlow, D. N., and Kim, Y. W., 1995, "Effect of Surface Roughness on Local Heat Transfer and Film Cooling Effectiveness," ASME Paper No. 95-GT-14.
23. Bons, J. P., 2005, "A Critical Assessment of Reynolds Analogy for Turbine Flows," ASME J. Heat Transfer, 127, pp. 472-485.
24. Mills, A. F., 1992, Heat Transfer, 1st ed., Irwin, IL.
25. Schultz, D. L., and Jones, T. V., 1973, "Heat-transfer Measurements in Short-duration Hypersonic Facilities," Advisory Group for Aerospace Research and Development, Report No. 165, NATO, Belgium.
26. Gatlin, B., and Hodge, B. K., 1990 An Instructional Computer Program for Computing the Steady, Compressible Turbulent Flow of an Arbitrary Fluid Near a Smooth Wall, 2nd printing, Mississippi State University Press, Mississippi State, MS.
27. Wang, Z. J., and Chen, R. F., 2002, "Anisotropic Solution-Adaptive Viscous Cartesian Grid Method for Turbulent Flow Simulation," AIAA J., 40, pp. 1969-1978.
28. Roe, P. L., 1983, "Approximate Reimann Solvers, Parameter Vectors, and Difference Schemes," J. Comput. Phys., 43, p. 357.
29. Venkatakrishnan, V., 1995, "Convergence to Steady State Solutions of the Euler Equations on Unstructured Grids with Limiters," J. Comput. Phys., 118, pp. 120-130.
30. Wang, Z. J., 1998, "A Quadtree-Based Adaptive Cartesian/Quad Grid Flow Solver for Navier-Stokers Equations," Comput. Fluids, 27(4), pp. 529-549.
31. Chen, R. F., and Wang, Z. J., 2000, "Fast, Block Lower-Upper Symmetric Gauss-Seidel Scheme for Arbitrary Grids," AIAA J., 38(12), pp. 2238-2245.
32. Spalart, P. R., and Allmaras, S. R., 1992, "A One-Equation Turbulence Model for Aerodynamic Flows," Paper No. AIAA-92-0439.
33. Spalart, P. R., and Allmaras, S. R., 1994, "A One-Equation Turbulence Model for Aerodynamic Flows," Rech. Aerosp., 1, pp. 5-21.
34. Bons, J. P., and McClain, S. T., 2004, "The Effect of Real Turbine Roughness and Pressure Gradient on Heat Transfer," ASME J. Turbomach., 126, pp. 385-394.
35. White, F. M., 1991, Viscous Fluid Flow, 2nd ed., McGraw-Hill, New York.
36. Kays, W. M., and Crawford, M. E., 1993, Convective Heat and Mass Transfer, 3rd ed., McGraw-Hill, New York.
37. Schlichting, H., 1979, Boundary Layer Theory, 7th ed., McGraw-Hill, New York.
38. Dipprey, D. F., and Sabersky, R. H., 1962, "Heat and Momentum Transfer in Smooth and Rough Tubes at Various Prandtl Numbers," Int. J. Heat Mass Transfer, 6, pp. 329-353.
39. Wassel, A. T., and Mills, A. F., 1979, "Calculation of Variable Property Turbulent Friction and Heat Transfer in Rough Pipes," ASME J. Heat Transfer, 101, pp. 469-474.
40. Taylor, R. P., and Hodge, B. K., 1993, "A Validated Procedure for the Prediction of Fully-Developed Nusselt Numbers and Friction Factors in Pipes with 3-Dimensional Roughness," J. Enhanced Heat Transfer, 1, pp. 23-35.
41. Kithcart, M. E., and Klett, D. E., 1997, "Heat Transfer and Skin Friction Comparison of Dimpled Versus Protrusion Roughness," NASA Report No. N97-27444, pp. 328-336.