Floc strength evaluation at alternative shearing with presence of natural organic matters

Drying Technology

Volumn 26, Issue 8, 2008, Pages 996-1001

  Sung, Shung Shuan ^a   Ju, Sheau Pyng ^b   Hsu, Chien ^a   Mujumdar, Arun S ^c   Lee, Duu Jong ^a  

^a NATIONAL TAIWAN UNIVERSITY   (Taiwan)

^b National Science Council   (Taiwan)

^c NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

Coagulation; Organic matter; Shearing; Strength

Indexed keywords

ALUMINUM; AMINES; BIOGEOCHEMISTRY; FRACTAL DIMENSION; KAOLIN; ORGANIC ACIDS; ORGANIC COMPOUNDS; SHEARING;

FLOC BREAKAGE; FLOC FORMATION; FLOC SIZE; FLOC STRENGTH; HUMIC ACID (HA); KAOLIN PARTICLES; MASTER CURVES; NATURAL ORGANIC MATTERS (NOC); ORGANIC SUBSTANCES; POLY-ALUMINUM CHLORIDE (PACI); SHEARING RATES; TIME CURVES;

BIOLOGICAL MATERIALS;

EID: 47749106505     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930802115669     Document Type: Article

References (41)

1. Annadurai, G., Sung, S. S., Lee, D. J. and Peng, X. F. (2002) Factorial design analysis for turbidity and humic acid removal from high turbidity storm water and floc characteristics. Journal of the Chinese Institute of Chemical Engineers, 33:4, pp. 353-364.
2. Annadurai, G., Sung, S. S. and Lee, D. J. (2003) Floc characteristics and removal of turbidity and humic acid from high turbidity stormwater. Journal of Environmental Engineering ASCE, 129:6, pp. 571-575.
3. Lin, W. W., Sung, S. S., Lee, D. J., Chen, Y. P., Chen, D. S. and Lee, S. F. (2003) Coagulation of humic-kaolin-PACl aggregates. Water Science and Technology, 47:1, pp. 145-152.
4. Sung, S. S., Lee, D. J. and Huang, C. P. (2005) Steady-state humic-acid-containing blanket in upflow suspended bed. Water Research, 39:5, pp. 831-838.
5. Dempsey, B. A., Ganho, R. M. and O'Melia, C. R. (1984) The coagulation of humic substances by means of aluminum salts. Journal of American Water Works Association, 76:4, pp. 141-150.
6. Dempsey, B. A. (1989) Aquaticic Humic Substances: Influence on Fate and Treatment of Pollutants, pp. 409-424. American Chemical Society, Washington, DC
7. O'Melia, C. R. (1991) Practice, theory, and solid-liquid separation. Journal of Water Supply Research and Technology-Aqua, pp. 371-379.
8. Narkis, N. and Rebhun, M. (1997) Flocculation in presence of organic macromolecules of natural water and secondary effluents. Water Science and Technology, 36:4, pp. 85-91.
9. Tambo, N. and Watanabe, Y. (1979) Physical characteristics of flocs. I: The floc density function and aluminum floc. Water Research, 13:5, pp. 409-419.
10. Rebhun, M. (1990) Chemical Water and Wastewater Treatment, pp. 117-126. Springer, Berlin
11. O'Melia, C. R. (2004) Coagulant requirements in potable water treatment. Proceedings of the 10th International Drinking Water Conference
12. Su, C. T., Wu, R. M. and Lee, D. J. (2004) Blanket dynamics of upflow suspended bed. Water Research, 38:1, pp. 89-96.
13. Chen, Y. S., Tai, C. Y. D., Chang, M. H. and Liu, H. S. (2006) Characteristics of micromixing in a rotating packed bed. Journal of the Chinese Institute of Chemical Engineers, 37:1, pp. 63-69.
14. Tao, T., Peng, X. F. and Lee, D. J. (2006) Interaction between ice and floc under freezing. Journal of the Chinese Institute of Chemical Engineers, 37:3, pp. 299-304.
15. Tien, C. and Ramarao, B. V. (2006) On analysis of cake formation and growth in cake filtration. Journal of the Chinese Institute of Chemical Engineers, 37:1, pp. 81-94.
16. Arlabosse, P. and Chitu, T. (2007) Identification of the limiting mechanism in contact drying of agitated sewage sludge. Drying Technology, 25:4, pp. 557-567.
17. Islam, M. R., Thaker, K. S. and Mujumdar, A. S. (2007) A diffusion model for a drum dryer subjected to conduction, convection, and radiant heat input. Drying Technology, 25:4, pp. 1033-1043.
18. Lee, D. J., Lai, J. Y. and Mujumdar, A. S. (2006) Moisture distribution and dewatering efficiency for wet materials. Drying Technology, 24:10, pp. 1201-1208.
19. Hwang, K. J., You, S. F. and Don, T. M. (2006) Disruption kinetics of bacterial cells during purification of poly-beta-hydroxyalkanoate using ultrasonication. Journal of the Chinese Institute of Chemical Engineers, 37:3, pp. 209-216.
20. Kung, H. H. (2006) Nanotechnology: Opportunity for chemical engineering. Journal of the Chinese Institute of Chemical Engineers, 37:1, pp. 1-7.
21. Otawara, K. and Kitamura, T. (2006) Comparison of a belt-filter and centrifuge in the crystal purification process with CDC (cooling disc crystallizer) and KCP (Kureha crystal purifier). Journal of the Chinese Institute of Chemical Engineers, 37:5, pp. 509-512.
22. Lee, J. E., Lee, J. K. and Choi, H. K. (2007) Filter press for electrodewatering of waterworks sludge. Drying Technology, 25:10, pp. 1649-1657.
23. Novak, J. T. (2006) Dewatering of sewage sludge. Drying Technology, 24:10, pp. 1257-1262.
24. Seginer, I. and Bux, M. (2006) Modeling solar drying rate of wastewater sludge. Drying Technology, 24:11, pp. 1353-1356.
25. Seginer, I., Ioslovich, I. and Bux, M. (2007) Optimal control of solar sludge dryer. Drying Technology, 25:2, pp. 401-415.
26. Sheng, W. Y., Peng, X. F., Lee, D. J. and Su, A. (2006) Coagulation of particles through rapid mixing. Drying Technology, 24:10, pp. 1271-1276.
27. Chen, B. H., Lee, S. J., Lee, D. J. and Spinosa, L. (2006) Rheological behavior of wastewater sludge following polyeletrolyte flocculation. Drying Technology, 24:10, pp. 1289-1295.
28. Kan, C. C., Huang, C. P. and Pan, J. R. (2002) Coagulation of high turbidity water: The effects of rapid mixing. Journal of Water SRT-AUQA, 51:2, pp. 77-85.
29. Kan, C. C., Huang, C. P. and Pan, J. R. (2002) Time requirement for rapid-mixing in coagulation. Colloids and Surfaces A, 203:1, pp. 1-9.
30. Kan, C. C. and Huang, C. P. (1998) Coagulation monitoring in surface water treatment facilities. Water Science and Technology, 38:3, pp. 237-244.
31. Yukselen, M. A. and Gregory, J. (2004) The reversibility of floc breakage. International Journal of Mineral Processing, 73:2, pp. 251-259.
32. Gregory, J. (2004) Monitoring floc formation and breakage. Water Science and Technology, 50:12, pp. 163-170.
33. Spicer, P. T., Pratsinis, S. E., Raper, J., Amal, R., Bushell, G. and Meesters, G. (1998) The reversibility of floc breakage. Powder Technology, 97:1, pp. 26-34.
34. Chaignon, V., Lartiges, B. S., El Samrani, A. and Mustin, C. (2002) Evolution of size distribution and transfer of mineral particles between flocs in activated sludges: An insight into floc exchange dynamics. Water Research, 36:3, pp. 676-684.
35. Francois, R. J. (1987) Strength of aluminum hydroxide flocs. Water Research, 21:9, pp. 1023-1030.
36. Yoon, S. Y. and Deng, Y. L. (2004) flocculation and reflocculation of clay suspension by different polymer systems under turbulent conditions. Journal of Colloid and Interface Science, 278:1, pp. 139-145.
37. Sung, S. S. (2002)National Taiwan University, Taiwan
38. Jarvis, P., Jefferson, B. and Parsons, S. A. (2005) Breakage, regrowth, and fractal nature of natural organic matter flocs. Environmental Science & Technology, 39:7, pp. 2307-2314.
39. Jarvis, P., Jefferson, B. and Parsons, S. A. (2005) How the natural organic matter to coagulant ratio impacts on floc structural properties. Environmental Science & Technology, 39:22, pp. 8919-8924.
40. Dentel, S. K. (2001) sludge into Biosolids, IWA Press, London
41. Wu, R. M., Lee, D. J., Waite, T. D. and Guan, J. (2002) Multi-level structure of sludge flocs. Journal of Colloid and Interface Science, pp. 383-392.