Some strengthening methods for austenitic stainless steels

Steel Research International

Volumn 79, Issue 6, 2008, Pages 404-412

  Karjalainen, L P ^a   Taulavuori, T ^b   Sellman, M ^b   Kyrolainen A ^c  

^a UNIVERSITY OF OULU   (Finland)

^b Outokumpu Tornio Works   (Finland)

^c Steelpolis   (Finland)

Author keywords

Austenitic stainless steels; Bake hardening; Ductility; Grain size refinement; Strain aging; Strain hardening; Strain induced martensite; Strength

Indexed keywords

AUSTENITIC STAINLESS STEEL; COLD WORKING; CORROSION RESISTANCE; GRAIN REFINEMENT; GRAIN SIZE AND SHAPE; INDUSTRIAL RESEARCH; MARTENSITE; STEEL CORROSION; STRAIN HARDENING; STRENGTHENING (METAL); TENSILE STRENGTH;

ALLOYED AUSTENITES; BAKE HARDENING; CONSTRUCTIONAL MATERIAL; GRAIN SIZE REFINEMENT; LOW STACKING FAULT ENERGIES; STRAIN AGEING; STRAIN-INDUCED MARTENSITE; STRENGTH; STRENGTH PROPERTY; STRENGTHENING METHODS;

DUCTILITY;

EID: 47349087350     PISSN: 16113683     EISSN: None     Source Type: Journal    
DOI: 10.1002/srin.200806146     Document Type: Article

References (59)

1. European steel technology platform (ESTEP), Strategic research agenda; A vision for the future of the steel sector, European Commission, Belgium, 2005.
2. th European Stainless Steel Science and Market Congress, 2002, Paris, France, p. 10.
3. th European Stainless Steel Science and Market Congress, 2002, Paris, France, p.57.
4. C. Greisert: Strain-induced formation of martensite during forming and springback behaviour of annealed and hard cold-rolled stainless steel grades EN 1.4301 and EN 1.4318, PhD Thesis, RWTH Aachen, Helsinki University of Technology, 2004.
5. Design Manual For Structural Stainless Steel - Third Edition, Euro Inox and The Steel Construction Institute, 2006, p. 19.
6. A. Gales, M. Sirén, J, Säynäjäkangas, N. Akdut, D. Hoecke, R. Sanchez: Development of lightweight trains and metro cars by using ultra high strength stainless steels, Report EUR 22837 EN, European Communities, Luxembourg, 2007, p. 15.
7. A. Kyröläinen, M. Vilpas, H. Hänninen: J. Materials Engineering and Performance, 9 (2000), No. 6, 669.
8. T.S. Byun: Acta Materialia, 51 (2003), 3063.
9. V. Gerold, H.P. Karnthaler, Acta Metallurgies 37 (1989), 2177.
10. G. Sailer, K. Spiradek-Hahn, C. Scheu, H. Clemens: Materials Science and Engineering A, 427 (2006) 246.
11. R.E. Schramm, R.P. Reed: Metall. Trans., 6A (1975), 1345.
12. P.J. Brofman, G.S. Ansell: Metall. Trans., 9A (1978), 879.
13. P.J. Ferreira, P.A. Mullner: Acta Materialia, 46 (1998), 4479.
14. I.A. Yakubtsov, A. Ariapour, D.D. Petrovic: Acta Materialia, 47 (1999), 1271.
15. J. Talonen, H. Hänninen: Acta Materialia, 55 (2007), 6108.
16. L. Vitos, J.-O. Nilsson, B. Johansson: Acta Materialia, 54 (2006), 3821.
17. V. Gavriljuk, Yu. Petrov, B. Shanina: Scripta Materialia, 55 (2006), 537.
18. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron, Y. Bréchet: Materials Science and Engineering A, 387-389 (2004), 873.
19. P.L. Mangonon, G. Thomas: Metall. Trans., 1 (1970), 1577.
20. J.R. Patel and M. Cohen: Acta Metallurgica, IA (1953), 531.
21. G.B. Olson, M. Cohen: Metall. Trans., 7A (1976), 1897.
22. L. Bracke, G. Mertens, J. Penning, D. Cooman, M. Liebeherr, N. Akdut: Metall. Mater. Trans. A, 37A (2006), 307.
23. P. Hedström, U. Lienert, J. Almer, M. Oden: Scripta Materialia 56 (2007), 213.
24. A. Kyröläinen: High strength stainless steels - temper rolled, International Symposium on Advanced in Stainless Steels 2007, ISAS 2007, Chennai, India, 9-11, April, 2007, The Indian Institute of Metals, CD.
25. R. Tarkiainen: Effect of cold rolling and carbon and nitrogen contents on the properties of a metastable stainless steel, Master thesis, Oulu University, Oulu, Finland, 1991, p.64 (in Finnish).
26. J. Sahnén: The anisotropic behaviour of the mechanical properties in hard cold rolled austenitic stainless steels, Master Thesis (in Finnish), University of Oulu, Finland, 2004.
27. M.C. Somani, L.P. Karjalainen, M. Koljonen, P. Aspegren, T. Taulavuori, A. Kyröläinen: Microstructure and mechanical properties of reversion annealed cold-rolled 17Cr-TNi type austenitic stainless steels, Stainless Steel' 05, Proc. of the 5th European Congress, Stainless Steel Science and Market, (eds. J.A. Odriozola and A. Paul), Seville, Spain, Sept. 27-30, 2005, p.37.
28. M. Koljonen, Developing a fine-grained austenitic stainless steel by cold rolling and annealing, Master thesis, Oulu University, Oulu, Finland, 2005, 75 pp.
29. A. Frehn, E. Ratte, W. Bleck: Steel Grips, 2 (2004), 447.
30. E. Ratte: Sense and sensitivity of thermo-mechanical forming simulation of metastable austenitic stainless steels, Proc. of the 6th European Stainless Steel Conference - Science and Market, June 10-13, 2008, Helsinki (in press).
31. K. Nohara, Y. Ono, N. Ohashi: J. Iron Steel Institute Japan, 63 (1977), No. 5, 772.
32. J. Sjöberg: Wire, 23 (1973), 155.
33. R.G. Stringfellow, D.M. Parks, G.B. Olson: Acta Metallurgica, 40 (1992), 1703.
34. G.B. Olson, M. Cohen: Metallurgical Transactions, 6A (1975), 791.
35. K. Spencer, J.D. Embury, K.T. Conlon, M. Véron, Y. Bréchet: Materials Science and Engineering A, 387-389 (2004), 873.
36. J. Talonen, P. Nenonen, G. Pape, H. Hänninen: Metallurgical and Materials Transactions A, 36A (2005), 421.
37. T. Taulavuori, P. Aspegren, J. Säynäjäkangas, J. Salmén and P. Karjalainen: The anisotropic behaviour of the nitrogen alloyed stainless steel grade 1.4318, Proc. Intern. Conf. on High Nitrogen Steels 2004, (eds. N. Akdut, B.C. DeCooman, J. Foct), 19-22 Sept. 2004, Oodense, Belgium, pp. 405.
38. Mis-Match project (Tekes 40031/07; No 2455/31/06 ) (unpublished results).
39. A. Kyröläinen, P. Yrjölä, V.-P. Immonen, S. Sainio: Hitsaustekniikka, (2001), No. 1, 14 (in Finnish).
40. T. Oikarinen: Tandem MIG/MAG welding of EN 1.4318 C850 grade austenitic stainless steel, Master thesis, University of Oulu, 2008 (in Finnish).
41. A.K. Ibraheem, R. Priestner, J.R. Bowen, P.B. Prangnell, J.F. Humphreys: Iron and Steelmaking, 28 (2001), 203.
42. L.X. Pan, L.P. Karjalainen, M.C. Somani: Processing and stability of ultrafine grained structures in some microalloy steels, Materials Science Forum, 500-501 (2005), 363.
43. S. Takaki and Y. Tokunaga: Ultra Grain Refining in Metastable Austenitic Stainless Steels, Proc. Innovation Stainless Steels, 1993, Florence, Italy, Vol. 2, p. 327.
44. S. Rajasekhara, P.J. Ferreira, L.P. Karjalainen, and A. Kyröläinen: Metall. Mater. Transactions A, 3 8A, (2007), No. 6, 1207.
45. K. Tomimura, S. Takaki and Y. Tokunaga: ISIJ International, 31 (1991), No.12, 1431.
46. K. Tomimura, S. Takaki, S. Tanimoto and Y.Tokunaga: ISIJ International, 31, (1991), No. 7, 721.
47. A. di Schino, M. Barteri, J.M. Kenny: J. Materials Science Letters, 21 (2002), 751.
48. M. C. Somani, L.P. Karjalainen, A. Kyröläinen, T. Taulavuori: Processing of submicron grained microstructures and enhanced mechanical properties by cold-rolling and reversion annealing of metastable austenitic stainless steels, Materials Science Forum, 539-543 (2007), 4875.
49. M. Somani, P. Karjalainen, P. Juntunen, S. Rajasekhara, P. Ferreira, A. Kyröläinen, T. Taulavuori, P. Aspegren: Submicron microstructure and mechanical properties achieved in a short annealing of cold-rolled austenitic stainless steels, Iron & Steel, Supplement, 40 (2005), 283.
50. P. Juntunen, M. Somani, P. Karjalainen, D. Misra, A. Kyrölä inen: Property enhancement in metastable austenitic stainless steels through the formation of ultra-fine grained austenite and shear reversion, Intern. Symp. on Advances on Stainless Steels, ISAS 2007, 9-11, April, 2007, The Indian Institute of Metals, CD.
51. A.S. Hamada, L.P. Karjalainen, M.C. Somani: Materials Science and Engineering A, 431 (2006), 211.
52. D.L. Johannsen: Development of Nano/Submicron Grain Sizes in an AISI 301Austenitic Stainless Steel, The University of Texas at Austin, Master's thesis, 2004.
53. F. Behr: Material-Wissenschaft und Werkstofftechnik, 30 (1999), No. 11, 669.
54. J. Talonen, P. Nenonen, H. Hänninen: Static strain ageing of cold-worked austenitic stainless steels, High Nitrogen Steels 2004, Ostend, Belgium, 2004, p. 113.
55. B. Sönen, N. Akdut: Strengthening of austenitic stainless steels by static strain ageing, High Nitrogen Steels 2004, Ostend, Belgium, 2004, p.141.
56. R. Ruoppa, T. Taulavuori: Bake hardening of some austenitic stainless steels, Proc. of the 6th European Stainless Steel Conference - Science and Market, June 10-13, 2008, Helsinki (in press).
57. P. Antoine, B. Soenen, N. Akdut: Static strain ageing in cold rolled metastable austenitic stainless steels, Materials Science Forum, 539-543, (2007), No. 5, 4891.
58. R.L.K. Ruoppa, T.T. Taulavuori: Influence of cold rolling reduction and strain ageing on forming properties of some austenitic stainless steels, International Deep-drawing Research Group Conference, Györ, Hungary, 2007, pp. 579-586.
59. J. Talonen, H. Hänninen: Static strain ageing of metastable austenitic stainless steel, Proc. of the 6th European Stainless Steel Conference - Science and Market, June 10-13, 2008, Helsinki (in press).