The influence of ceramic surface treatments on the micro-shear bond strength of composite resin to IPS Empress 2

Journal of Prosthodontics

Volumn 17, Issue 5, 2008, Pages 409-414

  Panah, Faride Gerami ^a   Rezai, Sosan Mir Mohammad ^a   Ahmadian, Leila ^a,b  

^a TEHRAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

^b ZAHEDAN UNIVERSITY OF MEDICAL SCIENCES   (Iran)

Author keywords

Composite resin; IPS Empress 2; Micro shear bond strength

Indexed keywords

EMPRESS 2; LITHIA DISILICATE; LITHIUM DERIVATIVE; RESIN; RESIN CEMENT; SILANE DERIVATIVE; TETRIC CERAM;

ANALYSIS OF VARIANCE; ARTICLE; DENTAL BONDING; DENTAL CARE; DENTAL ETCHING; DENTAL SURGERY; EQUIPMENT; METHODOLOGY; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTY; TOOTH PROSTHESIS;

AIR ABRASION, DENTAL; ANALYSIS OF VARIANCE; COMPOSITE RESINS; DENTAL BONDING; DENTAL ETCHING; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; EQUIPMENT FAILURE ANALYSIS; LITHIUM COMPOUNDS; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SHEAR STRENGTH; SILANES; SURFACE PROPERTIES;

EID: 47249166073     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2007.00296.x     Document Type: Article

References (46)

1. Barreto MT : Failures in ceramometal fixed restorations. J Prosthet Dent 1984 51 : 186 189
2. Dong JK, Luthy H, Wohlwend A, et al : Heat-pressed ceramics: technology and strength. Int J Prosthodont 1992 5 : 9 16
3. Probster L, Diehl J : Slip-casting alumina ceramics for crown and bridge restorations. Quintessence Int 1992 23 : 25 31
4. Kelly JR, Giordano R, Pober R, et al : Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont 1990 3 : 430 440
5. Thompson JY, Anusavice KJ, Naman A, et al : Fracture surface characterization of clinically failed all-ceramic crowns. J Dent Res 1994 73 : 1824 1832
6. Wakabayashi N, Anusavice KJ : Crack initiation modes in bilayered alumina/porcelain disks as a function of core/veneer thickness ratio and supporting substrate stiffness. J Dent Res 2000 79 : 1398 1404
7. Robbins JW : Intraoral repair of the fractured porcelain restoration. Oper Dent 1998 23 : 203 207
8. Peumans M, Van Meerbeek B, Yoshida Y, et al : Porcelain veneers bonded to tooth structure: an ultra-morphological FE-SEM examination of the adhesive interface. Dent Mater 1999 53 : 105 119
9. Bertolotti RL, Lacy AM, Watanabe LG : Adhesive monomer for porcelain repair. Int J Prosthodont 1989 2 : 483 489
10. Stangel I, Nathanson D, Hsu CS : Shear strength of the composite bond to etched porcelain. J Dent Res 1987 66 : 1460 1465
11. Llobell A, Nicholls JI, Kois JC, et al : Fatigue life of porcelain repair system. Int J Prosthodont 1992 5 : 205 213
12. Beiran I, Miller B, Bentur Y : The efficiency of calcium gluconate in ocular hydrofluoric acid burns. Hum Exp Toxicol 1997 16 : 223 228
13. Suliman AH, Swift EJ Jr., Perdigao J : Effects of surface treatment and bonding agents on bond strength of composite resin to porcelain. J Prosthet Dent 1993 70 : 118 120
14. Tylka DF, Stewart GP : Comparison of acidulated phosphate fluoride gel and hydrofluoric acid etchants for porcelain-composite repair. J Prosthet Dent 1994 72 : 121 127
15. Kupiec KA, Wuertz KM, Barkmeier WW, et al : Evaluation of porcelain surface treatments and agents for composite-to-porcelain repair. J Prosthet Dent 1996 76 : 119 124
16. Kato H, Matsumura H, Atsuta M : Effect of etching and sandblasting on bond strength to sintered porcelain of unfilled resin. J Oral Rehabil 2000 27 : 103 110
17. Fan PL : Porcelain repair materials. Council on dental materials, Instruments, and equipment. J Am Dent Assoc 1991 122 : 124 130
18. Sheridan RL, Ryan CM, Quinby WC Jr., et al : Emergency management of major hydrofluoric acid exposures. Burns 1995 21 : 62 64
19. Asvesti C, Guadagni F, Anastasiadis G, et al : Hydrofluoric acid burns. Cutis 1997 59 : 306 308
20. Gallerani M, Bettoli V, Peron L, et al : Systemic and topical effects of intradermal hydroflouric acid. Am J Emerg Med 1998 16 : 521 522
21. Hooshmand T, van Noort R, Keshvad A : Storage effect of a pre-activated silane on the resin to ceramic bond. Dent Mater 2004 20 : 635 642
22. Tjan AH, Nemetz H : A comparison of the shear bond strength between two composite resins and two etched ceramic materials. Int J Prosthodont 1988 1 : 73 79
23. Chang JC, Nguyen T, Duong JH, et al : Tensile bond strengths of dual-cured cements between a glass-ceramic and enamel. J Prosthet Dent 1998 79 : 503 507
24. Della Bona A, Anusavice KJ : Microstructure, composition, and etching topography of dental ceramics. Int J Prosthodont 2002 15 : 159 167
25. Della Bona A, Anusavice KJ, Shen C : Microtensile strength of composite bonded to hot-pressed ceramics. J Adhes Dent 2000 2 : 305 313
26. Senawongse P, Harnirattisai C, Shimada Y, et al : Effective bond strength of current adhesive systems on deciduous and permanent dentin. Oper Dent 2004 29 : 196 -202
27. Shimada Y, Iwamato N, Kawamashi M, et al : Shear bond strength of current adhesive systems to enamel, dentin and dentin-enamel junction region. Oper Dent 2003 28 : 585 590
28. Filho AM, Vieira LC, Araujo E, et al : Effect of different ceramic surface treatments on resin microtensile bond strength. J Prosthodont 2004 13 : 28 35
29. Matsumura H, Kato H, Atsuta M : Shear bond strength to feldspathic porcelain of two luting cements in combination with three surface treatments. J Prosthet Dent 1997 78 : 511 517
30. Della Bona, Van Noort R : Shear versus tensile bond strength of resin composite bonded to ceramic. J Dent Res 1995 74 : 151 156
31. Versluis A, Tantbirojn D, Douglas WH : Why do shear tests pull out dentin? J Dent Res 1997 76 : 298 307
32. Pameijer CH, Louw NP, Fischer D : Repairing fractured porcelain: how surface preparation affects shear force resistance. J Am Dent Assoc 1996 127 : 203 209
33. Chadwick RG, Masson AG : Attempted evaluation of three porcelain repair system-what we are really testing? J Oral Rehabil 1998 25 : 610 615
34. Leibrock A, Degenhart M, Behr M, et al : In vitro study of the effect of thermo-and load-cycling on the bond strength of porcelain repair system. J Oral Rehabil 1999 26 : 130 137
35. Anusavice KJ, DeHoff PH, Fairhurst CW : Comparative evaluation of ceramic-metal bond test using finite element stress analysis. J Dent Res 1980 59 : 608 613.
36. Van Noort R, Noroozi S, Howard IC, et al : A critique of bond strength measurements. J Dent 1989 17 : 61 67
37. Sano H, Shono T, Sonoda H, et al : Relationship between surface area for adhesion and tensile bond strength - evaluation of a micro-tensile bond test. Dent Mater 1994 10 : 236 240
38. Shimada Y, Yamaguchi S, Tagami J : Micro-shear bond strength of dual-cured resin cement to glass ceramics. Dent Mater 2002 18 : 380 388
39. Della Bona A, Anusavice KJ, Mecholsky JJ Jr. : Failure analysis of resin composite bonded to ceramic. Dent Mater 2003 19 : 693 699
40. Oh WS, Shen C : Effect of surface topography on the bond strength of a composite to three different types of ceramic. J Prosthet Dent 2003 90 : 241 246
41. Ozcan M, Vallittu PK : Effect of surface conditioning methods on the bond strength of luting cement to ceramics. Dent Mater 2003 19 : 725 731
42. Dong JK, Oh SC : The microstructure of IPS Empress ceramics according to the heat treatment and the sprue type. J Korean Acad Prosthodont 1998 36 : 73 86
43. Horn HR : Porcelain laminate veneers bonded to etched enamel. Dent Clin North Am 1983 27 : 671 684
44. Bailey JH : Porcelain-to-composite bond strengths using four organosilane materials. J Prosthet Dent 1989 61 : 174 177
45. Thurmond JW, Barkmeier WW, Wilwerding TM : Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 1994 72 : 355 359
46. Kamada K, Yoshida K, Atsuta M : Effect of ceramic surface treatments on the bond of four resin luting agents to a ceramic material. J Prosthet Dent 1998 79 : 508 513