Microstructure and properties of W-15Cu alloys prepared by mechanical alloying and spark plasma sintering process

Journal Wuhan University of Technology, Materials Science Edition

Volumn 23, Issue 3, 2008, Pages 399-402

  Zhang, Qiaoxin ^a   Shi, Xiaoliang ^a   Yang, Hua ^a   Duan, Xinglong ^a  

^a WUHAN UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Mechanical alloying; Spark plasma sintering (SPS); W 15Cu

Indexed keywords

AGRICULTURAL PRODUCTS; ALLOYING; ALLOYS; CARBON FIBER REINFORCED PLASTICS; COPPER; CRYSTALS; ELECTRIC SPARKS; LAW ENFORCEMENT; LITHOGRAPHY; MECHANICAL ALLOYING; MECHANICAL PROPERTIES; METALLIC COMPOUNDS; METALLURGY; MICROSTRUCTURE; PLASMAS; POWDERS; SINTERING; SPARK PLASMA SINTERING; THERMOELECTRICITY; TUNGSTEN; TUNGSTEN COMPOUNDS;

AVERAGE GRAIN SIZES; COMPOSITE PARTICLES; COMPOSITE POWDERS; CU(B) ALLOY; FINE MICROSTRUCTURE; HIGH MECHANICAL PROPERTIES; HIGH-ENERGY MILLING; HOMOGENEOUS MICROSTRUCTURE; MECHANICAL ALLOYING (MA); RAW POWDERS; RELATIVE DENSITIES; ROCKWELL C HARDNESS (HRC); ROOM-TEMPERATURE (RT); SPARK PLASMA SINTERING (SPS); SPARK-PLASMA-SINTERING-PROCESS; TRANSVERSE RUPTURE STRENGTH (TRS); UNIVERSITY OF TECHNOLOGY;

COPPER ALLOYS;

EID: 47249161702     PISSN: 10002413     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11595-007-3399-9     Document Type: Article

References (12)

1. Kim Y D, Oh N L, Oh S T, et al. Thermal Conductivity of W-Cu Composites at Various Temperatures[J]. Materials Letters, 2001, 51(5):420-424
2. Yoon E S, Lee J S, Oh S T, et al. Microstructure and Sintering Behavior of W-Cu Nanocomposite Powder Produced by Thermo-chemical Process[J]. Int. J.Ref. Met. Hard Mater., 2002, 20(3):201-206
3. Hong S H, Kim B K. Fabrication of W-20 wt % Cu Composite Nanopowder and Sintered Alloy with High Thermal Conductivity[J]. Materials Letters, 2003, 57(18):2 761-2 767
4. Ryu S S, Kim Y D, Moon I H. Dilatometric Analysis on the Sintering Behavior of Nanocrystalline W-Cu Prepared by Mechanical Alloying[J]. Journal of Alloys and Compounds, 2002, 335(1-2):233-240
5. Kim D G, Kim G S, Oh S T, et al. The Initial Stage of Sintering for the W-Cu Nanocomposite Powder Prepared from W-CuO Mixture[J]. Materials Letters, 2004, 58(5):578-581
6. Doré F, Lay S, Eustathopoulos N, et al. Segregation of Fe During the Sintering of Doped W-Cu Alloys[J]. Scripta Materialia, 2003, 49(3):237-242
7. Kim D G, Lee K W, Oh S T, et al. Preparation of W-Cu Nanocomposite Powder by Hydrogen-reduction of Ball-milled W and CuO Powder Mixture[J]. Materials Letters, 2004, 58(7-8):1 199-1 203
8. Franciné Alves da Costa, Angelus Giuseppe Pereira da Silva, Uilame Umbelino Gomes. The Influence of the Dispersion Technique on the Characteristics of the W-Cu Powders and on the Sintering Behavior[J]. Powder Technol., 2003, 134(1-2):123-132
9. Kim J C and Moon I H. Sintering of Nanostructured W-Cu Alloys Prepared by Mechanical Alloying[J]. NanoStructured Materials, 2002, 335(1-2):283-290
10. Doré F, Martin C L, Allibert C H. Apparent Viscosity of W-Cu Powder Compacts During Sintering[J]. Mater. Sci. Eng. A, 2004, 383(2):390-398
11. Cha S I, Hong S H, Kim B K. Spark Plasma Sintering Behavior of Nanocrystalline WC-10Co Cemented Carbide Powders[J]. Mater. Sci. Eng. A, 2003, 351(1-2):31-38
12. 3 Ceramics Densified by Spark Plasma Sintering[J]. J. Eur. Ceram. Soc., 2000, 20(12):2 149-2 152