Failure behavior of glass ionomer cement under Hertzian indentation

Dental Materials

Volumn 24, Issue 9, 2008, Pages 1223-1229

  Wang, Yan ^a,b   Darvell, B W ^b  

^a SUN YAT SEN UNIVERSITY   (China)

^b UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Failure behavior; Filler reinforcement; Glass ionomer cement (GIC); Hertzian indentation

Indexed keywords

CEMENTS; CRACKING (CHEMICAL); DENTAL MATERIALS; DENTAL PROSTHESES; ELECTRIC FREQUENCY CONTROL; FAILURE MODES; FILLERS; FRACTURE; FRACTURE FIXATION; GLASS; HEALTH; INTERCALATION; LOADS (FORCES); POLYMERS; PRECIOUS METALS; QUALITY ASSURANCE; REGRESSION ANALYSIS; REINFORCEMENT; RELIABILITY; RESINS; SCANNING; SILICONES; SILVER; STEEL TESTING; WEAR OF MATERIALS;

ANALYSIS OF VARIANCE (ANOVA); ARTIFICIAL SALIVA; CONE CRACKING; FAILURE BEHAVIORS; FAILURE LOADS; GLASS IONOMER CEMENT (GIC); HARD STEEL; HERTZIAN INDENTATIONS; HYBRID CHEMISTRY; LOAD-BEARING CAPACITY; RADIAL CRACKING; RESTORATIVE MATERIALS;

FAILURE ANALYSIS;

CEMENT; COMPOMER; DENTAL ALLOY; GLASS IONOMER; NYLON; RESIN; RESIN CEMENT; SALIVA SUBSTITUTE; SILVER; STEEL; WATER;

ACOUSTICS; ARTICLE; CHEMISTRY; HARDNESS; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; PH; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TIME; X RAY DIFFRACTION;

ACOUSTICS; CERMET CEMENTS; COMPOMERS; COMPOSITE RESINS; DENTAL AMALGAM; GLASS IONOMER CEMENTS; HARDNESS; HUMANS; HYDROGEN-ION CONCENTRATION; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; NYLONS; RESIN CEMENTS; SALIVA, ARTIFICIAL; SILVER; STEEL; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; WATER; X-RAY DIFFRACTION;

EID: 47249112115     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2008.02.002     Document Type: Article

References (35)

1. Simmons J.J. The miracle mixture: glass ionomer and alloy powder. Tex Dent J 100 10 (1983) 6-12
2. Kerby R.E., and Bleiholder R.F. Physical properties of stainless-steel and silver-reinforced glass-ionomer cements. J Dent Res 70 10 (1991) 1358-1361
3. Oldfield C.W.B., and Ellis B. Fibrous reinforcement of glass-ionomer cements. Clin Mater 7 4 (1991) 313-323
4. Lohbauer U., Walker J., Nikolaenko S., Werner J., Clare A., Petschelt A., et al. Reactive fibre reinforced glass ionomer cements. Biomaterials 24 17 (2003) 2901-2907
5. McKinney J.E., Antonucci J.M., and Rupp N.W. Wear and microhardness of a silver-sintered glass-ionomer cement. J Dent Res 67 5 (1988) 831-835
6. Uno S., and Finger W. Long-term mechanical characteristics of resin-modified glass iomomer restorartive materials. Den Mater 12 1 (1996) 64-69
7. Xie D., Brantley W.A., Culbertson B.M., and Wang G. Mechanical properties and microstructures of glass ionomer cements. Dent Mater 16 2 (2000) 129-138
8. Ana I.D., Matsuya S., Ohta M., and Ishikawa K. Effects of added bioactive glass on the setting and mechanical properties of resin-modified glass ionomer cement. Biomaterials 24 18 (2003) 3061-3067
9. Gu Y.W., Yap A.U.J., Cheang P., and Khor K.A. Zirconia-glass ionomer cement-a potential substitute for Miracle Mix. Scr Mater 52 2 (2005) 113-116
10. Kelly J.R. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 81 6 (1999) 652-661
11. Lawn B.R., Deng Y., and Thompson V.P. Use of contact testing in the characterization and design of allceramic crownlike layer structures: a review. J Prosthet Dent 86 5 (2001) 495-510
12. Wang Y., and Darvell B.W. Effects of amalgam thickness and bonding on failure mode under Hertzian indentation (Abstract No. 1834). J Dent Res 82 Sp Iss B (2003) B-240
13. Leung V., and Darvell B.W. Calcium phosphate system in saliva-like media. J Chem Soc Faraday Trans 87 11 (1991) 1759-1764
14. Morris M. Powder diffraction data: from the Joint Committee on Powder Diffraction Standards Associateship at the National Bureau of Standards (1976), U.S. Govt. Printing Office, Washington, DC
15. Sidhu S.K., Watson T.F., Anstice H.M., Billington R.W., and Pearson G.J. Moisture susceptibility of resinmodified glass-ionomer materials. Quintessence Int 26 11 (1995) 753-754
16. Attar N., Tam L.E., and McComb D. Mechanical and physical properties of contemporary dental luting agents. J Prosthet Dent 89 2 (2003) 127-134
17. Mitsuhashi A., Hanaoka K., and Teranaka T. Fracture toughness of resin-modified glass ionomer restorative materials: effect of powder/liquid ratio and powder particle size reduction on fracture toughness. Dent Mater 19 8 (2003) 747-757
18. Kovarik R.E., and Muncy M.V. Fracture toughness of resin-modified glass ionomers. Am J Dent 8 3 (1995) 145-148
19. Mitchell C.A., Douglas W.H., and Cheng Y.-S. Fracture toughness of conventional, resin-modified glassionomer and composite luting cements. Dent Mater 15 1 (1999) 7-13
20. Goldman M. Fracture properties of composite and glass ionomer dental restorative materials. J Biomed Mater Res 19 7 (1985) 771-783
21. Arita K., Lucas M., and Nishino M. The effect of adding hydroxyapatite on the flexure strength of glass cement. Dent Mater J 22 2 (2003) 126-136
22. Beyls H.M.F., Verbeeck R.M.H., Martens L.C., and Lemaitre L. Compressive strength of some polyalkenoates with or without dental amalgam alloy incorporation. Dent Mater 7 3 (1991) 151-154
23. Williams J.A., Billington R.W., and Pearson G.J. The comparative strengths of commercial glass-ionomer cements with and without metal additions. Br Dent J 172 7 (1992) 279-282
24. Kerby R.E., and Knobloch L. Strength characteristics of glass-ionomer cements. Oper Dent 17 5 (1992) 170-174
25. Sarkar N.K. Metal-matrix interface in reinforced glass ionomers. Dent Mater 15 6 (1999) 421-425
26. Guazzato M., Albakry M., Ringer S., and Swain M. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 20 5 (2004) 449-456
27. ISO1559. ISO 1559: Dental amalgam. Geneva: International Organization for Standardization; 2001.
28. 2 into glass ionomer cement (GIC). Biomaterials 26 7 (2005) 713-720
29. Darvell BW. Materials science for dentistry. 8th ed. Hong Kong: BW Darvell; 2007.
30. Mueller H.J. Fracture toughness and fractography of dental cements, lining, build-up, and filling materials. Scanning Microsc 4 2 (1990) 297-307
31. Brown D., and Combe E. Effects of stainless steel fillers on the properties of polycarboxylate cement. J Dent Res 52 2 (1973) 388
32. Piwowarczyk A., Ottl P., and Lauer H.C. Laboratory strength of glass ionomer and zinc phosphate cements. J Prosthodont 10 3 (2001) 140-147
33. Combe E.C., Shaglouf A.-M.S., Watts D.C., and Wilson N.H.F. Mechanical properties of direct core build-up materials. Dent Mater 15 3 (1999) 158-165
34. Craig R.G. Restorative dental materials. 10th ed. (1997), Mosby, St. Louis
35. Wang Y., and Darvell BW. Failure mode of dental restorative materials under Hertzian indentation. Dent Mater 23 10 (2007) 1236-1244