Elastic-plastic behaviour of dual-phase, high-strength steel under strain-path changes

European Journal of Mechanics, A/Solids

Volumn 27, Issue 5, 2008, Pages 764-782

  Tarigopula, V ^a   Hopperstad, O S ^a   Langseth, M ^a   Clausen, A H ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

Author keywords

DP800; High strength steel; Non proportional loading; Numerical simulations; Sheet metal

Indexed keywords

CONSTITUTIVE MODELS; CRYSTALLOGRAPHY; ELASTOPLASTICITY; IRON; PLASTIC FLOW; PLASTIC SHEETS; STEEL; STEEL ANALYSIS; STEEL SHEET; STRESSES; TENSILE TESTING;

(1 1 1) ORIENTATION; ELASTIC PLASTIC; ELSEVIER (CO); HIGH STRENGTH STEEL (HSS); INDUCED ANISOTROPY; INITIAL FLOW; KINEMATIC HARDENING; LOADING SEQUENCES; PRE-STRAIN; REASONABLE ACCURACY; ROOM-TEMPERATURE (RT); SOFTENING PHENOMENON; STRAIN PATH CHANGES; STRAIN PATHS; STRESS STRAIN BEHAVIOURS; TWO STAGES; UNIAXIAL TENSILE TESTING;

STRAIN;

EID: 46749083893     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.euromechsol.2008.01.002     Document Type: Article

References (47)

1. Achani, D., 2006. Constitutive models of elastoplasticity and fracture for aluminium alloys under strain path change. Doctoral thesis, Dept. of Structural Engineering, NTNU Trondheim, Norway
2. Armstrong, P.J., Fredrick, C.O., 1966. A mathematical representation of the multiaxial Bauchinger effect. G.E.G.B. report, RD/B/N 731
3. Barlat F., Becker R.C., Hayashida Y., Maeda Y., Yanagawa M., Chung K., Brem J.C., Lege D.J., Matsui K., Murtha S.J., and Hattori S. Yielding description for solution strengthened aluminum alloys. Int. J. Plasticity 13 (1997) 385-401
4. Barlat F., Maeda Y., Chung K., Yanagava M., Berm J.C., Hayashida Y., Lege D.J., Matsui K., Murtha S.J., Hattori S., Becker R.C., and Makosey S. Yield function development for aluminium alloy sheets. J. Mech. Phys. Solids 45 (1997) 1727-1763
5. Barlat F., Ferreira Duarte J.M., Gracio J.J., Lopes A.B., and Rauch E.F. Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample. Int. J. Plasticity 19 (2003) 1215-1244
6. Belytschko T., Liu W.K., and Moran M. Nonlinear Finite Elements for Continua and Structures (2000), Wiley
7. Berstad, T., Lademo, O.-G., Hopperstad, O.S., 2005. Weak and strong texture models in LS-DYNA (WTM-2D/3D and STM-2D). SINTEF report STF80MK F05180, SINTEF material and chemistry, Trondheim
8. Chaboche J.L. Time independent constitutive theories for cyclic plasticity. Int. J. Plasticity 2 (1986) 149
9. Chun B.K., Jinn J.T., and Lee J.K. Modelling the Bauschinger effect for sheet metals, part I: Theory. Int. J. Plasticity 18 (2002) 571-595
10. Gardey B., Bouvier S., Richard V., and Bacroix B. Texture and dislocation structures observation in a dual-phase steel under strain-path changes at large deformation. Mater. Sci. Eng. A 400-401 (2005) 136-141
11. Geng L., and Wagoner R.H. Role of plastic anisotropy and its evolution on springback. Int. J. Mech. Sci. 44 (2002) 123-148
12. Ghosh A.K., and Backofen W.A. Strain-hardening and instability in biaxially stretched sheets. Metall. Trans. 4 (1973) 1113-1123
13. Haddadi H., Bouvier S., Banu M., Maier C., and Teodosiu C. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: Modelling, numerical analysis and identification. Int. J. Plasticity 22 (2006) 2226-2271
14. Hance, B.M., 2005. The influence of deformation-induced residual stresses on the post-forming tensile stress/strain behaviour of dual-phase steels. Ph.D. thesis, Materials Science and Engineering, University of Pittsburgh
15. Hershey A.V. Plasticity of isotropic aggregate of anisotropic facecentred cubic crystals. J. Appl. Mech. 21 3 (1954) 241-249
16. Hopperstad O.S., and Remseth S. Return mapping algorithm for a class of cyclic plasticity models. Int. J. Numer. Engrg. 38 (1995) 549-564
17. Hopperstad O.S., Langseth M., and Remseth S. Cyclic stress-strain behaviour of alloy AA6060. Part I: Uniaxial experiments and modelling. Int. J. Plasticity 11 (1995) 725-739
18. Hopperstad O.S., Langseth M., and Remseth S. Cyclic stress-strain behaviour of alloy AA6060 T4. Part II: Biaxial experiments and modelling. Int. J. Plasticity 11 (1995) 741-762
19. Lemaitre J., and Chaboche J.L. Mechanics of Solid Materials (1990), Cambridge University Press pp. 161-241
20. Li F., and Bate P.S. Strain path changes effects in cube textured aluminium. Acta Metall. Mater. 39 (1991) 2639-2650
21. Li S., Hoferlin E., Van Bael A., Van Houtte P., and Teodosiu C. Finite element modelling of plastic anisotropy induced by texture and strain-path change. Int. J. Plasticity 19 (2003) 647-674
22. Lin S.B., and Ding J.L. Experimental study of the plastic yielding of rolled sheet metals with cruciform plate specimens. Int. J. Plasticity 11 (1995) 583-604
23. Lloyd D.J., and Sang H. The influence of strain path on subsequent mechanical properties - orthogonal tensile paths. Metall. Trans. 10A (1979) 1767-1772
24. Logan R.W., and Hosford W.F. Upper bound anisotropic yield locus calculations assuming 〈111〉-pencil glide. Int. J. Mech. Sci. 22 7 (1980) 419-430
25. LSTC (Livermore Software Technology Corporation), 2006. LS-DYNA keyword user's manual, Version 970
26. Oliveira M.C., Alves J.L., Chaparro B.M., and Menzes L.F. Study on the influence of work-hardening modelling in springback prediction. Int. J. Plasticity 23 (2007) 516-543
27. Orowan E. In: Gerald R., and Grube W. (Eds). Internal Stresses and Fatigue in Metals (1959), Elsevier, Amsterdam. 0-672-21218-8 59-80
28. Raphanel J.L., Schmitt J.-H., and Baudelet B. Effect of a prestrain on the subsequent yielding of low carbon steel sheets: Experiments and simulations. Int. J. Plasticity 2 (1986) 371
29. Raphanel J.L., Rauch E., Shen E.L., and Schmitt J.-H. Shear of prestrained steel specimens. Scripta Metall. 21 (1987) 1087-1090
30. Rauch E.F., and Schmitt J.-H. Dislocation substructures in mild steel deformed in simple shear. Mater. Sci. Eng. A 113 (1989) 441-448
31. Schmitt J.-H., Aernould E., and Baudelet B. Yield loci for polycrystalline metals without texture. Mater. Sci. Eng. 75 (1985) 13-20
32. Schmitt J.-H., Shen E.L., and Raphanel J.L. A parameter for measuring the magnitude of a change of strain path: Validation and comparison with experiments on low carbon steel. Int. J. Plasticity 10 (1994) 535-551
33. Speich G.R., and Miller R.L. Mechanical properties of ferrite-martensite steel. In: Kot R.A., and Morris J.W. (Eds). Structure and Properties of Dual-Phase Steels, Conference Proceedings (1979), Met. Soc. of AIME, New York
34. Sugimoto, K., Sakaki, T., Miyagawa, O., Kuramoto, H., 1985. Mechanical anisotropy of prestrained sheets of a dual-phase steel. HSLA Steels: Metallurgy and applications. In: Proceedings of Mechanical Engineering '04, Varna, Bulgaria, September 2004
35. Tarigopula V., Hopperstad O.S., Langseth M., and Clausen A.H. A study of large plastic deformations in dual-phase high strength steel using digital image correlation and FE analysis. Exp. Mech. 48 2 (2008)
36. Teodosiu C., and Hu Z. Evolution of the intragranular microstructure at moderate and large strains: Modelling and computational significance. In: Shen S.F., and Dawson P.R. (Eds). Proceedings of the NUMIFORM '95 (1995), Balkema, Rotterdam 173-182
37. Voce E. The relation between the stress and strain for homogeneous deformation. J. Inst. Metals 74 (1948) 537-562
38. Wagoner R.H., and Laukonis J.V. Plastic behavior of aluminium-killed steel following plane-strain deformation. Metall. Trans. 14A (1983) 1487-1495
39. Wilson D.V. Effects of changes in strain path on work-hardening in cubic metals. Metal. Trans. 20A (1989) 2471-2482
40. Wilson D.V., and Bate P.S. Influence of cell walls and grain boundaries on transient responses of an IF steel to changes in strain path. Acta Metall. Mater. 38 (1994) 215-226
41. Wilson D.V., Zandrahimi M., and Roberts W.T. Effects of changes in strain path on work-hardening in CP aluminium and an Al-Cu-Mg-Si alloy. Acta Metall. Mater. 38 (1990) 215-226
42. Wu H.-C. Anisotropic plasticity for sheet metals using the concept of combined isotropic-kinematic hardening. Int. J. Plasticity 18 (2002) 1661-1682
43. Wu H.-C., Hong H.K., and Shiao Y.P. Anisotropic plasticity with application to sheet metals. Int. J. Mech. Sci. 41 (1999) 703-724
44. Wu P.D., MacEwen S.R., Lloyd D.J., Jain M., Tugcu P., and Neale K.W. On pre-straining and the evolution of material anisotropy in sheet metals. Int. J. Plasticity 21 (2005) 723-739
45. Yoshida F., Uemori T., and Fujiwara K. Elastic-plastic behaviour of steel sheets under in-plane cyclic tension-compression at large strain. Int. J. Plasticity 18 (2002) 633-659
46. Zhonghua L., and Haicheng G. Bauschinger effect and residual phase stresses in two ductile-phase steels: part I. The influence of phase stresses on the Bauschinger effect. Metall. Trans. 21A (1990) 717-724
47. Zhonghua L., and Haicheng G. Bauschinger effect and residual phase stresses in two ductile-phase steels: part II. The effect of microstructure and mechanical properties of the constituent phases on Bauschinger effect and residual phase stresses. Metall. Trans. 21A (1990) 725-732