Quantitative assessment and prediction of contact area development during spherical tip indentation of glassy polymers

Philosophical Magazine

Volumn 88, Issue 9, 2008, Pages 1291-1306

  Pelletier, C G N ^a   Den Toonder, J M J ^a   Govaert, L E ^a   Hakiri, N ^b   Sakai, M ^b  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b TOYOHASHI UNIVERSITY OF TECHNOLOGY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING; COMPUTER SIMULATION; CONSTITUTIVE MODELS; FORECASTING; JOINTS (ANATOMY); NUMERICAL METHODS; PHOTOACOUSTIC EFFECT; PLASTICS; STRAIN HARDENING; STRAIN RATE; VICKERS HARDNESS TESTING;

(PL) PROPERTIES; CONTACT AREAS; DIFFERENT SPEEDS; DIFFERENT THERMAL HISTORIES; ELASTOPLASTIC CONSTITUTIVE MODELS; GLASSY POLYMERS; IN-SITU; INDENTATION DEPTHS; INDENTER; INSTRUMENTED INDENTATION; LOAD RELAXATION; LOCALIZATION EFFECTS; MACROSCOPIC TESTS; NUMERICAL MODELLING; NUMERICAL SIMULATIONS; PILE UPS; QUANTITATIVE ASSESSMENTS; SINK-IN; SPHERICAL(PIVOT); STRAIN SOFTENING (IGC:F6);

INDENTATION;

EID: 46649102496     PISSN: 14786435     EISSN: 14786443     Source Type: Journal    
DOI: 10.1080/14786430802123224     Document Type: Article

References (28)

1. H. Hertz and J. Reine, Angew. Math. 92 (1881) p.156.
2. W.C. Oliver and G.M. Pharr, J. Mater. Res. 7 (1992) p.1564.
3. J.S. Field and M.V. Swain, J. Mater. Res. 8 (1993) p.297.
4. A. Bolshakov and G.M. Pharr, J. Mater. Res. 13 (1998) p.1049.
5. B. Taljat and G.M. Pharr, Int. J. Solids Struct. 41 (2004) p.3891.
6. J. Alkorta, J.M. Martinez-Esnaola and J.G. Sevillano, J. Mater. Res. 20 (2005) p.432.
7. O. Casals and J. Alcala, Acta Mater. 53 (2005) p.3545.
8. L. Wang and S.I. Rokhlin, J. Mater. Res. 21 (2006) p.995.
9. M.C. Boyce, D.M. Parks and A.S. Argon, Mech. Mater. 7 (1988) p.15.
10. E.M. Arruda and M.C. Boyce, Int. J. Plast. 9 (1993) p.697.
11. O.A. Hasan and M.C. Boyce, Polym. Eng. Sci. 35 (1995) p.331.
12. C.P. Buckley and D.C. Jones, Polymer 36 (1995) p.3301.
13. P.J. Dooling, C.P. Buckley and S. Hinduja, Polym. Eng. Sci. 38 (1998) p.892.
14. C. Gerlach, C.P. Buckley and D.P. Jones, Trans. Inst. Chem. Eng. A 76 (1998) p.38.
15. T.A. Tervoort, E.T.J. Klompen and L.E. Govaert, J. Rheol. 40 (1996) p.779.
16. L.E. Govaert, P.H.M. Timmermans and W.A.M. Brekelmans, J. Eng. Mater. Technol. 122 (2000) p.177.
17. E.T.J. Klompen, T.A.P. Engles, L.E. Govaert et al., Macromolecules 38 (2005) p.6997.
18. T. Miyajima and M. Sakai, Phil. Mag. 86 (2006) p.5729.
19. M. Sakai, N. Hakiri and T. Miyajima, J. Mater. Res. 21 (2006) p.2298.
20. T.A. Tervoort, R.J.M. Smit, W.A.M. Brekelmans et al., Mech. Time-Dep. Mater. 1 (1998) p.269.
21. E.T.J. Klompen, T.A.P. Engels, L.C.A. van Breemen et al., Macromolecules 38 (2005) p.7009.
22. R.N. Howard and G. Thackray, Proc. R. Soc. Lond. A 302 (1967) pp. 453-472.
23. T.A. Tervoort and L.E. Govaert, J. Rheol. 44 (2000) p.1263.
24. F.P.T. Baaijens, Rheol. Acta 30 (1991) p.284.
25. I.M. Ward, J. Mater. Res. 6 (1971) p.1397.
26. R.A. Duckett, B.C. Goswami, L.S.A. Smith et al., Br. Polym. J. 10 (1978) p.11.
27. M. Mata and J. Alcala, J. Mech. Phys. Solids 52 (2004) p.145.
28. H.G.H. van Melick, L.E. Govaert and H.E.H. Meijer, Polymer 44 (2003) p.3579.