Oriented morphology and enhanced mechanical properties of poly(l-lactic acid) from shear controlled orientation in injection molding

Materials Science and Engineering: A

Volumn 490, Issue 1-2, 2008, Pages 81-89

  Ghosh, Satyabrata ^a   Viana, Julio C ^a   Reis, Rui L ^a   Mano, João F ^a  

^a UNIVERSITY OF MINHO   (Portugal)

Author keywords

Energy at break; Fracture surface morphology; Orientation; PLLA; SCORIM

Indexed keywords

FRACTURE; LACTIC ACID; MOLDS; MOLECULAR ORIENTATION; MORPHOLOGY; SHEAR FLOW; SHEARING; SHEARING MACHINES;

CONTROLLED ORIENTATION; ENERGY; ENERGY AT BREAK; FRACTURE SURFACE MORPHOLOGY; MOLD TEMPERATURES; ORIENTATION; PLLA; POLY(L-LACTIC ACID); POLY-L-LACTIC ACIDS; SHEAR CONTROLED ORIENTATION IN INJECTION MOLDING;

INJECTION MOLDING;

EID: 45249114649     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2008.01.003     Document Type: Article

References (33)

1. Gilding D.K., and Reed A.M. Polymer 20 (1979) 1459-1464
2. Middleton J.C., and Tipton A.J. Biomaterials 21 (2000) 2335-2346
3. Thomson R.C., Yaszemski M.J., Powers J.M., and Mikos A.G. J. Biomater. Sci., Polym. Ed. 7 (1995) 23-38
4. Schwach G., and Vert M. Int. J. Biol. Macromol. 25 (1999) 283-291
5. Athanasiou K.A., Niederauer G.G., and Agrawal C.M. Biomaterials 17 (1996) 93-102
6. Shin M., Ishii O., Sueda T., and Vacanti J.P. Biomaterials 25 (2004) 3717-3723
7. Chen G.Q., and Wu Q. Biomaterials 26 (2005) 6565-6578
8. Athanasiou K.A., Agrawal C.M., Barber F.A., and Burkhart S.S. Arthroscopy 14 (1998) 726-737
9. Chen C.C., Chueh J.Y., Tseng H., Huang H.M., and Lee S.Y. Biomaterials 24 (2003) 1167-1173
10. Wang L., Ma W., Gross R.A., and McCarthy S.P. Polym. Degrad. Stab. 59 (1998) 161-168
11. Hu Y., Hu Y.S., Topolkaraev V., Hiltner A., and Baer E. Polymer 44 (2003) 5711-5720
12. Urayama H., Kanamori T., and Kimura Y. Macromol. Mater. Eng. 287 (2002) 116-121
13. Martin O., and Averous L. Polymer 42 (2001) 6209-6219
14. Jacobsen S., and Fritz H.G. Polym. Eng. Sci. 39 (1999) 1303-1310
15. Wang Y., and Hillmyer M.A. J. Polym. Sci., Part A: Polym. Chem. 39 (2001) 2755-2766
16. Nijenhuis A.J., Colstee E., Grijpma D.W., and Pennings A.J. Polymer 37 (1996) 5849-5857
17. Grijpma D.W., Altpeter H., Bevis M.J., and Feijen J. Polym. Int. 51 (2002) 845-851
18. Nuutinen J.P., Clerc C., and Tormala P. J. Biomater. Sci., Polym. Ed. 14 (2003) 665-676
19. Mano J.F., Sousa R.A., Boesel L.F., Neves N.M., and Reis R.L. Compos. Sci. Technol. 64 (2004) 789-817
20. Ghosh S., Viana J.C., Reis R.L., and Mano J.F. Mater. Sci. Eng. C 28 (2008) 80-86
21. Boccaccini A.R., and Maquet V. Compos. Sci. Technol. 63 (2003) 2417-2429
22. Ghosh S., Viana J.C., Reis R.L., and Mano J.F. Polym. Eng. Sci. 47 (2007) 1141-1147
23. Reis R.L., Cunha A.M., Allan P.S., and Bevis M.J. Polym. Adv. Technol. 7 (1996) 784-790
24. Kalay G., and Bevis M.J. J. Polym. Sci., Part B: Polym. Phys. 35 (1997) 241-263
25. Mano J.F., Sousa R.A., Reis R.L., Cunha A.M., and Bevis M.J. Polymer 42 (2001) 6187-6198
26. Reis R.L., Mendes S.C., Cunha A.M., and Bevis M.J. Polym. Int. 43 (1997) 347-352
27. Sousa R.A., Kalay G., Reis R.L., Cunha A.M., and Bevis M.J. J. Appl. Polym. Sci. 77 (2000) 1303-1315
28. Sousa R.A., Mano J.F., Reis R.L., Cunha A.M., and Bevis M.J. Polym. Eng. Sci. 42 (2002) 1032-1045
29. Cooper-White J.J., and Mackay M.E. J. Polym. Sci., Part B: Polym. Phys. 37 (1999) 1803-1814
30. Altpeter H., Bevis M.J., Grijpma D.W., and Feijen J. J. Mater. Sci. Mater. Med. 15 (2004) 175-184
31. Viana J.C., Alves N.M., and Mano J.F. Polym. Eng. Sci. 44 (2004) 2174-2184
32. Kalay G., and Bevis M.J. J. Polym. Sci., Part B: Polym. Phys. 35 (1997) 265-291
33. Wyzgoski M.G., Krohn J.A., and Novak G.E. Polym. Compos. 25 (2004) 569-576