Knowledge Composition for efficient analysis problem formulation Part 1: Motivation and requirements

2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007

Volumn 2 PART B, Issue , 2008, Pages 789-801

  Bajaj, Manas ^a   Peak, Russell S ^a   Paredis, Christian J J ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

(E ,3E) PROCESS; ANALYSIS PROBLEMS; COMMERCIAL OFF THE SHELF (COTS); COMPUTATIONAL CAPABILITIES; DESIGN ALTERNATIVES; EFFICIENT ANALYSIS; INTERNATIONAL DESIGNS; MULTI-BODY; PROBLEM FORMULATION; SIMULATION-BASED DESIGN (SBD); TECHNICAL CONFERENCES;

ARCHITECTURAL DESIGN; COMPUTER NETWORKS; COMPUTERS; ENGINEERING; MICROFLUIDICS; NUMERICAL ANALYSIS; PROCESS ENGINEERING; SET THEORY; TECHNOLOGY;

PROCESS DESIGN;

EID: 44949160983     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2007-35049     Document Type: Conference Paper

References (69)

1. ABAQUS. (2006). "ABAQUS, Version 6.6." Retrieved Jun 20, 2006, from http://www.abaqus.com/products/products_overview.html.
2. Addanki, S., Cremonini, R. and Penberthy, S.J. (1991). "Graphs of models." Artificial Intelligence 51(1-3, Special issue: Qualitative reasoning about physical systems II): 145-177.
3. Andries, M., Engels, G., Habel, A., Hoffmann, B., Kreowski, H.-J., Kuske, S., Plump, D., Schurr, A. and Taentzer, G. (1999). "Graph transformation for specification and programming." Science of Computer Programming 34(1): 1-54.
4. ANSYS Inc. (2002). "ANSYS Mechanical 7.0." Retrieved Jun 20, 2006, from http://www.ansys.com/products/mcchanical.asp.
5. Arabshahi, S., Barton, D.C. and Shaw, N.K. (1991). "Towards integrated design and analysis." Finite Elements in Analysis and Design 9(4): 271-291.
6. Arabshahi, S., Barton, D.C. and Shaw, N.K. (1993). "Steps towards CAD-FEA integration." Engineering with Computers 9(1): 17-26.
7. Armstrong, C.G. (1994). "Modelling requirements for finite-element analysis." Computer-Aided Design 26(7): 573-578.
8. Armstrong, C.G., Donaghy, R.J. and Bridgett, S.J. (1996). Derivation of appropriate Idealisations in Finite Element Modelling. Third International Conference on Computational Structures technology, Budapest, Hungary Aug 21-23, 1996, Civil-Comp Press.
9. Bajaj, M. (2006). "A Composable Knowledge Methodology for Efficient Analysis Problem Formulation in Simulation-based Design," PhD Proposal thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta
10. Bajaj, M., Peak, R., Zwemer, D., Thurman, T., Klein, L., Liutkus, G., Brady, K., Messina, J. and Dickerson, M. (2006). Automating Thermo-Mechanical Warpage Estimation of PCBs/PCAs Using a Design-Analysis Integration Framework. Mentor U2U, San Jose, CA, USA May 3-5, 2006.
11. Belaziz, M., Bouras, A. and Brun, J.M. (2000). "Morphological analysis for product design" Computer-Aided Design 32(5-6): 377-388.
12. Chen, P.P. (1976). "The Entity-Relationship Model: Toward a Unified View of Data." ACM Transactions on Database Systems 1(1): 9-36.
13. Dassault Systemes. (2006). "CATIA, v5." Retrieved Jun 20, 2006, from http://www.3ds.com/products-solutions/plm-solutions/catia/overview/.
14. Diaz-Calderon, A., Paredis, C.J.J. and Khosla, P.K. (2000). Organization and selection of reconfigurable models. Proceedings of WSC 2000, Winter Simulation Conference, Orlando, FL, USA 10-13 Dec, IEEE; Piscataway, NJ, USA.
15. Engels, G. and Heckel, R. (2000). "Graph Transformation and Visual Modeling Techniques." Bulletin of the European Association for Theoretical Computer Science (EATCS) 71.
16. Falkenhainer, B. and Forbus, K.D. (1991). "Compositional modeling: finding the right model for the job." Artificial Intelligence 51:95-143.
17. Fenves, S.J. (2004). CPM 2: A Revised Core Product Model for Representing Design Information (NISTIR 7185). Gaithersburg, MD, USA, National Institute of Standards and Technology: 46.
18. Fenves, S.J., Choi, Y., Gurumoorthy, B., Mocko, G. and Sriram, R.D. (2003). Master Product Model for the Support of Tighter Integration of Spatial and Functional Design. Gaithersburg, MD, USA, National Institute of Standards and Technology.
19. Finn, D.P. (1993). "A Physical Modeling Assistant For The Preliminary Stages Of Finite Element Analysis." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 7(4): 275-286.
20. Gamma, E., Johnson, R., Helm, R. and Vlissides, J.M. (1995). Design Patterns: Elements of Reusable Object-Oriented Software, Addison-Wesley.
21. Georgia Tech COB-CEE. (2006). "The Composable Object (COB) Knowledge Representation: Enabling Advanced Collaborative Engineering Environments (CEEs)." Retrieved Jul 31, 2006, from http://www.eislab.gatech.edu/ projects/nasa-ngcobs/.
22. Georgia Tech DAI. (2007). "Capturing Design Process Information and Rationale to Support Knowledge-Based Design-Analysis Integration." from http://eislab.gatech.edu/projects/nist-dai/.
23. Gero, J.S. (1990). "Design Prototypes: a knowledge representation schema for design." AI Magazine 11(4): 26-36.
24. Giarratano, J.C. and Riley, G.D. (1998). Expert Systems: Principles and Programming, Brooks/Cole.
25. Gordon, S. (2001). An Analyst's View: STEP-Enabled CAD-CAE Integration. NASA's STEP for Aerospace Workshop, JPL, Pasadena, CA Jan 17,2001.
26. Grosse, I.R., Milton-Benoit, J.M. and Wileden, J.C. (2005). "Ontologies for supporting engineering analysis models." Artificial Intelligence for Engineering Design, Analysis and Manufacturing (AI EDAM) 19(1): 1-18.
27. Gruber, T.R. (1995). "Toward principles for the design of ontologies used for knowledge sharing." International Journal of Human-Computer Studies 43(5-6): 907-928.
28. Hoffman, C.M. and Joan-Arinyo, R. (1998). "CAD and the product master model." Computer-Aided Design 30(11): 905-918.
29. Hunten, K. (2001). "AP209 ARM Overview." Retrieved Jun 20, 2006, from http://pdesinc.aticorp.org/graphics/aps/ap209_tutorial.ppt.
30. ISO 10303-11.(2001). "STEP Part 11, Description method: The EXPRESS language reference manual" Retrieved Jun 20, 2006, from http://www.tc 184-sc4.org/SC4_Open/SC4_Work_Products_Documents/STEP_(10303)/1-99.
31. ISO 10303-104. (2000). "STEP Part 104, Integrated application resource: Finite element analysis" Retrieved Jun 20, 2006, from http://www.tc184-sc4.org/SC4_Open/SC4_Work_Products_Documents/STEP_(10303)/ 100-199/.
32. ISO 10303-203. (2000). "STEP Part 203, Application protocol: Configuration controlled 3D designs of mechanical parts and assemblies" Retrieved Jun 20, 2006, from http://www.tc184-sc4.org/SC4_Open/ SC4_Work_Products_Documents/STEP_(10303)/200-299/.
33. ISO 10303-209. (2001). "STEP Part 209, Application protocol: Composite and metallic structural analysis and related design." Retrieved Jun 20, 2006, from http://www.tc184-sc4.org/SC4_Open/ SC4_Work_Products_Documents/STEP_(10303)/200-299/.
34. ISO 10303-210. (2001). "STEP Part 210, Application protocol: Electronic assembly, interconnect, and packaging design." Retrieved Jun 20, 2006, from http://www.tc184-sc4.org/SC4_Open/SC4_Work_Products_Documents/ STEP_(10303)/200-299/.
35. Koo, D. (2000). "A Product Data-Driven Methodology for Automating Variable Topology Multi-Body Finite Element Analysis," MS thesis, Mechanical Engineering, The Georgia Institute of Technology, Atlanta, GA, USA
36. Ling, R., Steinberg, L. and Jaluria, Y. (1993). "MSG: A Computer System for Automated Modeling of Heat Transfer" Journal of Artificial Intelligence in Engineering Design, Analysis and Manufacturing 7 (4): 287-300..
37. Lipschutz, S. (1968). Schaum's Outline of General Topology. USA, McGraw-Hill.
38. Pahl, G. and Beitz, W. (1996). Engineering design: A Systematic Approach. London, U.K., Springer-Verlag.
39. Paredis, C.J.J., Diaz-Calderon, A., Sinha, R. and Khosla, P.K. (2001). "Composable Models for Simulation-Based Design." Engineering with Computers 17(2): 112-128.
40. Peak, R.S. (1993). "Product Model-Based Analytical Models (PBAMs): A New Representation of Engineering Analysis Models," PhD thesis, Mechanical Engineering, The Georgia Institute of Technology, Atlanta, GA, USA
41. Peak, R.S. (2003). Characterizing Fine-Grained Associativity Gaps: A Preliminary Study of CAD-CAE Model Interoperability. ASME International DETC /CIE, Chicago Sep 2-6, 2003.
42. Peak, R.S., Fulton, R.E., Nishigaki, I. and Okamoto, N. (1998). "Integrating engineering design and analysis using a multi-representation approach." Engineering with Computers 14(2): 93-114.
43. Peak, R.S., Paredis, C.J.J. and Tamburini, D.R. (2005). The Composable Object (COB) Knowledge Representation: Enabling Advanced Collaborative Engineering Environments (CEEs), COB Requirements & Objectives (v1.0). Atlanta, GA, USA, The Georgia Institute of Technology.
44. Peak, R.S., Roger M. Burkhart, Sanford A. Friedenthal, Wilson, M.W., Bajaj, M. and Kim, I. (2007). Simulation-Based Design Using SysML Part 1: A Parametrics Primer. The Seventeenth International Symposium of the INTERNATIONAL COUNCIL ON SYSTEMS ENGINEERING, San Diego, California, USA June 24-28, 2007.
45. Peak, R.S., Roger M. Burkhart, Sanford A. Friedenthal, Wilson, M.W., Bajaj, M. and Kim, I. (2007). Simulation-Based Design Using SysML Part 2: Celebrating Diversity by Example. The Seventeenth International Symposium of the INTERNATIONAL COUNCIL ON SYSTEMS ENGINEERING, San Diego, California, USA June 24-28, 2007.
46. Peak, R.S., Scholand, A.J., Tamburini, D.R. and Fulton, R.E. (1999). "Towards the Routinization of Engineering Analysis to Support Product Design." Invited Paper for Special Issue: Advanced Product Data Management Supporting Product Life-Cycle Activities, International Journal of Computer Applications in Technology 12(1): 1-15.
47. Pratt, M.J. (1995). Virtual Prototypes and Product Models in Mechanical Engineering. Gaithersburg, MD, USA, National Institute of Standards and Technology.
48. Protégé. (2006). "Protégé." Retrieved Jun 20, 2006, from http://protege.stanford.edu/.
49. PTC. (2006). "ProEngineer Wildfire, v3.0." Retrieved Jun 20, 2006, from http://www.ptc.com/community/proewf3/newtools/index.htm.
50. Reddy, J.N. (1993). An Introduction to the Finite Element Method. USA, McGraw-Hill Book Company.
51. Rumbaugh, J., Jacobson, I. and Booch, G. (2004). The Unified Modeling Language Reference Manual, Pearson Education.
52. Rumbaugh, J.R., Blaha, M.R., Premerlani, W., Eddy, F. and Lorensen, W. (1990). Object-Oriented Modeling and Design., Prentice Hall.
53. Sellgren, U. (2003). Architecting Models of Technical Systems for Non-Routine Simulations. International Conference on Engineering Design (ICED), Stockholm, Sweden Aug 19-21, 2003.
54. Shephard, M.S., Beall, M.W., O'Bara, R.M. and Webster, B.E. (2004). "Towards simulation-based design." Finite Elements in Analysis and Design 40(12, Special Issue: The Fifteenth Annual Robert J. Melosh Competition): 1575-1598.
55. Simmetrix Inc. (2006). "Simulation Application Suite." Retrieved Jun 20, 2006, from http://simmetrix.com/products/ SimulationApplicationSuite/main.html
56. Sinha, R., Paredis, C.J.J. and Khosla, P.K. (2000). Integration of mechanical CAD and behavioral modeling. Proceedings 2000 IEEE/ACM International Workshop on Behavioral Modeling and Simulation, Orlando, FL, USA 19-20 Oct., IEEE Computer Society; Los Alamitos, CA, USA.
57. SysML. (2006). "OMG Systems Modeling Language (OMG SysML)." Retrieved Jun 20, 2006, from http://www.omgsysml.org/.
58. Timoshenko, S.P. and Goodier, J.N. (1970). Theory of Elasticity. Singapore, McGraw-Hill Book Company.
59. Turkiyyah, G.M. and Fenves, S.J. (1996). "Knowledge-based assistance for finite-element modeling." IEEE Expert: Intelligent Systems and Their Applications 11(3): 23-32.
60. UGS. (2005). "NX 4." Retrieved Jun 20, 2006, from http://www.ugs.com/products/nx/.
61. UML 2. (2004). "OMG Unified Modeling Language (UML)." Retrieved Feb 12, 2007, from http://www.uml.org/.
62. UML 2 OCL. (2004). "OMG UML 2.0 Object Constraint Language." Retrieved Feb 12, 2007, from http://www.uml.org/
63. http://www.omg.org/technology/documents/modeling_spec_catal og.htm#OCL.
64. Wikipedia. (2006). "Topology." Retrieved Jun 20, 2006, from http://en.wikipedia.org/wiki/Topology.
65. Wilson, M. (2000). "The Constrained Object Representation for Engineering Analysis Integration.," MS thesis, Mechanical Engineering, The Georgia Institute of Technology, Atlanta, GA, USA
66. Wilson, M., Peak, R.S. and Fulton, R.E. (2001). Enhancing Engineering Design and Analysis Interoperability - Part 1: Constrained Objects. First MIT Conference Computational Fluid and Structural Mechanics (CFSM), Cambridge, Massachusetts, USA Jun 12-15,2001.
67. Yip, K.M.-k. (1993). Model Simplification by Asymptotic Order of Magnitude Reasoning. 11th National Conference on Artificial Intelligence, Washington, DC, USA July 11-15, 1993, The AAAI Press.
68. Zeng, S. (2004). "Knowledge-based FEA Modeling Method for Highly Coupled Variable Topology Multi-body Problems," PhD thesis, Mechanical Engineering, Georgia Institute of Technology, Atlanta
69. Zwemer, D., Bajaj, M., Peak, R., Thurman, T., Brady, K., McCarron, S., Spradling, A., Dickerson, M., Klein, L., Liutkus, G. and Messina, J. (2004). PWB Warpage Analysis and Verification Using an AP210 Standards-based Engineering Framework and Shadow Moiré. IEEE EuroSimE, Brussels, Belgium May 10-12, 2004.