Long-term creep and shrinkage in high-strength lightweight concrete

American Concrete Institute, ACI Special Publication

Volumn SP-227, Issue , 2005, Pages 317-336

  Lopez, M ^a   Kahn, L ^b   Kurtis, K ^b   Buchberg, B ^c  

^a PONTIFICIA UNIVERSIDAD CATÓLICA DE CHILE   (Chile)

^b Georgia Institute of Technology   (United States)

^c and Heger located ^*  (United States)

Author keywords

Creep; High performance; High strength; Lightweight concrete; Modeling; Shrinkage

Indexed keywords

AGGREGATES; COMPOSITE BEAMS AND GIRDERS; COMPRESSIVE STRENGTH; CONCRETE AGGREGATES; CREEP; HIGH PERFORMANCE CONCRETE; LIGHT WEIGHT CONCRETE;

CEMENT PASTE; COARSE AGGREGATES; CREEP AND SHRINKAGES; HIGH STRENGTH; HIGH STRENGTH CONCRETES; HIGH STRENGTH LIGHTWEIGHT CONCRETES; LIGHT-WEIGHT AGGREGATE CONCRETE; LONG TERM CREEP;

SHRINKAGE;

EID: 44849090830     PISSN: 01932527     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (42)

1. Aïtcin, P.-C. (1998) "High-Performance Concrete", E & FN Spon, London.
2. Shah, S. P., and Ahmad, S. H. (Ed.) (1994) "High Performance Concretes and Applications", McGraw-Hill.
3. ACI-Committee 363 (1992/Reapproved 1997) "State-of-the-Art Report on High-Strength Concrete", ACI Manual of Concrete Practice, American Concrete Institute, Farmington Hills, MI, pp. 363R.1-363R.55.
4. Neville, A. M. (1996) "Properties of Concrete", Addison Wesley Logman Limited, New York.
5. Nawy, E. G. (2001) "Fundamentals of High-Performance Concrete", John Wiley and Sons, New York.
6. Mehta, P. K. a. M., Paulo J.M. (1993) "Concrete. Microstructure, Properties and Materials", Mc Graw-Hill.
7. Carrasquillo, P. M., and Carrasquillo, R.L. (1988) "Evaluation of the use of the Current Concrete Practice in the Production of High-Strength Concrete", ACI Material Journal, V. 85 No.1: p. 49-54.
8. Carrasquillo, R. L., Nilson, A. H., and Slate, F. O. (1981) "Properties of High-Strength Concrete Subject to Short-Term Loads", Journal of the American Concrete Institute, V. 78 No.3: p. 171-78.
9. ACI-Committee 213 (2003) "Guide for Structural Lightweight-Aggregate Concrete", ACI Manual of Concrete Practice, American Concrete Institute, Farmington Hills, MI, pp. 213R.1-213R.387.
10. Meyer, K. F., and Kahn, L. F. (2002) "Lightweight Concrete Reduces Weight and Increases Span Length of Pretensioned Concrete Bridge Girders", PCI Journal, V. 47 No.1: p. 68-75.
11. Berra, M., and Ferrada, G. (1990). "Normalweight and Total-Lightweight High-Strength Concretes: A Comparative Experimental Study". High-Strength Concrete. Second International Symposium, Berkeley, California, American Concrete Institute, p. 701-33.
12. Hoff, G. C. (1990). "High-Strength Lightweight Concrete - Current Status and Future Needs". High-Strength Concrete. Second International Symposium, Berkeley, California, American Concrete Institute, p. 619-44.
13. Findley, W. N., Lai J. S. and Onaran K. (1989) "Creep ands Relaxation of Nonlinear Viscoelastic Materials", Dover Publications, Inc, New York.
14. ACI-Committee 209 (1997) "Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures", ACI Manual of Concrete Practice, American Concrete Institute, Farmington Hills, MI, pp. 209R.1-09R.47.
15. AASHTO-LRFD (1998) "AASHTO LRFD Bridge Design Specifications", AASHTO, Washington.
16. Comite Euro Internacional du Beton and Federation Internationale de la Precontrainte (1990) "Evaluation of the Time Dependent Behavior of Concrete", The Construction Press, Lancaster.
17. Bažant, Z. P., and Panula, L. (1978a) "Practical Prediction of Time-Dependent Deformations of Concrete. Part I: Shrinkage", Materials and Structures, V. 11 No.65: p. 307-16.
18. Bažant, Z. P., and Panula, L. (1978b) "Practical Prediction of Time-Dependent Deformations of Concrete. Part II: Basic Creep", Materials and Structures, V. 11 No.65: p. 317-28.
19. Bažant, Z. P., and Panula, L. (1978c) "Practical Prediction of Time-Dependent Deformations of Concrete. Part III: Drying Creep", Materials and Structures, V. 11 No.66: p. 415-23.
20. Bažant, Z. P., and Panula, L. (1978d) "Practical Prediction of Time-Dependent Deformations of Concrete. Part IV: Temperature Effect on Basic Creep", Materials and Structures, V. 11 No.66: p. 424-34.
21. Bažant, Z. P., and Panula, L. (1979a) "Practical Prediction of Time-Dependent Deformations of Concrete. Part V: Temperature Effect on Drying Creep", Materials and Structures, V. 12 No.69: p. 169-74.
22. Bažant, Z. P., and Panula, L. (1979b) "Practical Prediction of Time-Dependent Deformations of Concrete. Part VI: Cyclic Creep, Nonlinearity and Statistical Scatter", Materials and Structures, V. 12 No.69: p. 175-83.
23. Bažant, Z. P., and Panula, L. (1984) "Practical Prediction of Creep and Shrinkage of High Strength Concrete", Materials and Structures, V. 17 No.101: p. 375-178.
24. Bažant, Z. P., and Baweja, S. (1995a) "Creep and Shrinkage Prediction Model for Analysis and Design of Concrete Structures - Model B3, Rilem Draft Recommendation", Materials and Structures, V. 28: p. 357-65.
25. Bažant, Z. P., and Baweja, S. (1995b) "Justifications and Refinements of Model B3 for Concrete Creep and Shrinkage, 1. Statistics and Sensitivity", Materials and Structures, V. 28: p. 415-30.
26. Bažant, Z. P., and Baweja, S. (1995c) "Justifications and Refinements of Model B3 for Concrete Creep and Shrinkage, 2. Updating and Theoretical Basis", Materials and Structures, V. 28: p. 488-95.
27. Gardner, N. J., and Lockman, M. J. (2001) "Design Provisions for Drying Shrinkage and Creep of Normal-Strength Concrete", ACI Material Journal, V. 98 No.2: p. 159-67.
28. Sakata, K. (1993). "Prediction of Creep and Shrinkage, Creep and Shrinkage of Concrete". Fifth International RILEM Symposium, Barcelona, Spain, RILEM, p. 649-54.
29. Sakata, K., Tsubaki, T., Inoue, S., and Ayano, T. (2001). "Prediction Equations of Creep and Drying Shrinkage for Wide-Ranged Strength Concrete". Creep Shrinkage and Durability Mechanics of Concrete and Other Quasi-Brittle Materials, Cambridge, Massachusetts, United States, Elsevier, p. 753-58.
30. Le Roy, R., De Larrard, F., and Pons, G. (1996). "The AFREM Code Type Model for Creep and Shrinkage of High-Performance Concrete". 4th International Symposium on Utilization of High-Strength/High-Performance Concrete, Paris, p. 387-93.
31. Buchberg, B. S., and Kahn, L.F. (2002) "Mix Design and Properties of High Strength-High Performance Lightweight Concrete", Structural Engineering, Mechanics and Materials, School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, pp. 453.
32. Meyer, K. F., Buchberg, B.S., and Kahn, L. F. (2003). "Development of High Strength Lightweight Concrete Mix Designs: A Practical Approach". 49th Annual PCI Convention & Exhibition, the 3rd PCI/FHWA International Symposium on High Performance Concrete, and the National Bridge Conference., Orlando, Florida, Precast / Prestressed Concrete Institute.
33. Lopez, M., Kahn, L.F., Kurtis, K.E., and Lai, J.S. (2003) "Creep, Shrinkage, and Prestress Losses of High-Performance Lightweight Concrete", Research Report No.03-9, Office of Materials and Research, Georgia Department of Transportation. Atlanta, GA, pp. 310.
34. Lopez, M., Kahn, L.F., and Kurtis, K.E. (2004) “Creep and Shrinkage of High Performance Lightweight Concrete", ACI Material Journal, V. 101 No. 5: pp. 391-399.
35. Slapkus, A., and Kahn, L.F. (2002) "Evaluation of Georgia's High Performance Concrete Bridge", Research Report No.03-3, Office of Materials and Research Georgia Department of Transportation. Atlanta, GA, pp. 382.
36. Goodspeed, C. H., Vanikar, S., and Cook, Raymond A. (1996) "High-Performance Concrete Definition for Highway Structures", Concrete International, V. 18 No.2: p. 62-67.
37. ASTM C 1074 (1998) "Standard Practice for Estimating Concrete Strength by the Maturity Method", American Society for Testing and Materials, West Conshohocken, PA.
38. Neville, A. M., Dilger, W.H., and Brooks, J.J. (1983) "Creep of Plain and Reinforced Concrete", Construction Press, London and New York.
39. Holm, T. A., and Bremner, T. W. (1994) "High Strength Lightweight Aggregate Concrete", High Performance Concrete: Properties and Applications (Ed, Shah, S. P. and Ahmad, S. H.), McGraw-Hill, New York, NY, pp. 341-74.
40. Kohno, K., Okamoto, T., Isikawa, Y., Sibata, T., and Mori, H. (1999) "Effect of Artificial Lightweight Aggregate on Autogenous Shrinkage of Concrete", Cement and Concrete Research, V. 29: pp. 611-614.
41. Jensen, O. M., and Lura, P. (2003). “Techniques for Internal Curing of Concrete”. Advances in Cement and Concrete, Copper Mountain, Colorado, Engineering Conferences International.
42. Lura, P., Benz, D.P., and Lange, D.A. (2003). “Measurements of Water Transport from Saturated Pumice Aggregates to Hardening Cement Paste”. Advances in Cement and Concrete, Copper Mountain, Colorado, Engineering Conferences International.