Enhancement of wet- and MQL-based machining of automotive alloys using cutting tools with DLC/polymer surface treatments

Journal of Materials Engineering and Performance

Volumn 17, Issue 3, 2008, Pages 346-351

  Dosbaeva, Julia ^a   Fox Rabinovich, German ^a   Dasch, Jean ^b   Veldhuis, Stephen ^a  

^a MCMASTER UNIVERSITY   (Canada)

^b GENERAL MOTORS CORPORATION   (United States)

Author keywords

Chip formation; DLC coatings; Green machining; MQL; PFPE; Tool life

Indexed keywords

COATINGS; DIAMOND LIKE CARBON FILMS; LUBRICATION; MACHINING;

CHIP FORMATION; COATED CEMENTED CARBIDE DRILL BITS; GREEN MACHINING; TOOL LIFE;

MACHINE TOOLS;

EID: 43449111770     PISSN: 10599495     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11665-008-9209-5     Document Type: Conference Paper

References (23)

1. 1. M. Nouari G. List F. Girot D. Coupard 2003 Experimental Analysis and Optimization of Tool Wear in Dry Machining of Aluminium Alloys Wear 255 1359 1368 10.1016/S0043-1648(03)00105-4 1:CAS:528:DC%2BD3sXls1Ohtbg%3D M. Nouari, G. List, F. Girot, D. Coupard, Experimental Analysis and Optimization of Tool Wear in Dry Machining of Aluminium Alloys, Wear, 2003, 255, p 1359–1368
2. 2. M. Lahres P. Müller-Hummel O. Doerfel 1997 Applicability of Different Hard Coatings in Dry Milling Aluminium Alloys Surf. Coat. Technol. 91 1–2 116 121 10.1016/S0257-8972(96)03121-0 1:CAS:528:DyaK2sXktF2iuro%3D M. Lahres, P. Müller-Hummel, O. Doerfel, Applicability of Different Hard Coatings in Dry Milling Aluminium Alloys, Surf. Coat. Technol., 1997, 91 (1–2), p 116–121
3. 3. P.E. Hovsepian Q. Luo G. Robinson M. Pittman M. Howarth D. Doerwald R. Tietema W.M. Sim A. Deeming T. Zeus 2006 TiAlN/VN Superlattice Structured PVD Coatings: A New Alternative in Machining of Aluminium Alloys for Aerospace and Automotive Components Surf. Coat. Technol. 201 1–2 265 272 10.1016/j.surfcoat.2005.11.106 1:CAS:528:DC%2BD28XntVSmurs%3D P.E. Hovsepian, Q. Luo, G. Robinson, M. Pittman, M. Howarth, D. Doerwald, R. Tietema, W.M. Sim, A. Deeming, T. Zeus, TiAlN/VN Superlattice Structured PVD Coatings: A New Alternative in Machining of Aluminium Alloys for Aerospace and Automotive Components, Surf. Coat. Technol., 2006, 201 (1–2), p 265–272
4. 4. J. Dasch C. Ang C. Wong Y-T. Cheng A. Weiner L. Lev E. Konca 2006 A Comparison of Five Categories of Carbon-Based Tool Coatings for Dry Drilling of Aluminum Surf. Coat. Technol. 200 2970 2977 10.1016/j.surfcoat.2005.04.025 1:CAS:528:DC%2BD28Xmt1SisA%3D%3D J. Dasch, C. Ang, C. Wong, Y-T. Cheng, A. Weiner, L. Lev, E. Konca, A Comparison of Five Categories of Carbon-Based Tool Coatings for Dry Drilling of Aluminum, Surf. Coat. Technol., 2006, 200, p 2970–2977
5. 5. P. Koshy R.C. Dewes D.K. Aspinwall 2002 High Speed end Milling of Hardened AISI D2 Tool Steel (∼58HRC) J. Mater. Process. Technol. 127 2 266 273 10.1016/S0924-0136(02)00155-3 1:CAS:528:DC%2BD38Xnt1KhtLw%3D P. Koshy, R.C. Dewes, D.K. Aspinwall, High Speed end Milling of Hardened AISI D2 Tool Steel (∼58HRC), J. Mater. Process. Technol., 2002, 127 (2), p 266–273
6. 6. L.R. Silva E.C. Bianchi R.E. Catai R.Y. Fusse T.V. França P.R. Aguiar 2005 Study on the Behavior of the Minimum Quantity Lubricant—MQL Technique Under Different Lubricating and Cooling Conditions When Grinding ABNT 4340 Steel J. Braz. Soc. Mech. Sci. & Eng. 27 2 192 199 10.1590/S1678-58782005000200012 L.R. Silva, E.C. Bianchi, R.E. Catai, R.Y. Fusse, T.V. França, P.R. Aguiar, Study on the Behavior of the Minimum Quantity Lubricant—MQL Technique Under Different Lubricating and Cooling Conditions When Grinding ABNT 4340 Steel, J. Braz. Soc. Mech. Sci. & Eng., 2005, 27 (2), p 192–199
7. 7. K. Weinert I. Inasaki J.W. Sutherland T. Wakabayashi 2004 Dry Machining and Minimum Quantity Lubrication Ann. CIRP 53 2 511 538 K. Weinert, I. Inasaki, J.W. Sutherland, T. Wakabayashi, Dry Machining and Minimum Quantity Lubrication, Ann. CIRP, 2004, 53 (2), p 511–538
8. 8. T. Ueda A. Hosokawa K. Yamada 2006 Effect of Oil Mist on Tool Temperature in Cutting J. Manuf. Sci. Eng. 128 130 135 10.1115/1.2039099 T. Ueda, A. Hosokawa, K. Yamada, Effect of Oil Mist on Tool Temperature in Cutting, J. Manuf. Sci. Eng., 2006, 128, p 130–135
9. 9. G. Byrne D. Dornfeld B. Denkena 2003 Advancing Cutting Technology—Keynote Paper CIRP Ann. 52 2 1 25 10.1016/S0007-8506(07)60200-5 G. Byrne, D. Dornfeld, B. Denkena, Advancing Cutting Technology—Keynote Paper, CIRP Ann., 2003, 52 (2), p 1–25
10. 10. E. Brinksmeier A. Walter R. Janssen P. Diersen 1999 Aspects of Cooling Lubrication Reduction in Machining Advanced Materials Proc. Inst. Mech. Eng. 213 B-8 769 778 E. Brinksmeier, A. Walter, R. Janssen, P. Diersen, Aspects of Cooling Lubrication Reduction in Machining Advanced Materials, Proc. Inst. Mech. Eng., 1999, 213 (B-8), p 769–778
11. 11. A. Erdemir M. Switala R. Wei P. Wilbur 1991 A Tribological Investigation of the Graphite-to-Diamond-Like Behaviour of Amorphous Carbon Films Ion Beam Deposited on Ceramic Substrates Surf. Coat. Technol. 50 1 17 23 10.1016/0257-8972(91)90187-2 1:CAS:528:DyaK38XmsFCgtQ%3D%3D A. Erdemir, M. Switala, R. Wei, P. Wilbur, A Tribological Investigation of the Graphite-to-Diamond-Like Behaviour of Amorphous Carbon Films Ion Beam Deposited on Ceramic Substrates, Surf. Coat. Technol., 1991, 50 (1), 17–23
12. 12. C. Donnet A. Grill 1997 Friction Control of Diamond-Like Carbon Coatings Surf. Coat. Technol. 94–95 456 462 10.1016/S0257-8972(97)00275-2 C. Donnet, A. Grill, Friction Control of Diamond-Like Carbon Coatings, Surf. Coat. Technol., 1997, 94–95, p 456–462
13. 13. B. Grill V. Patel B. Meyerson 1991 Tribological Behaviour of Diamond-Like Carbon: Effects of Preparation Conditions and Annealing Surf. Coat. Technol. 49 1–3 530 536 10.1016/0257-8972(91)90112-A 1:CAS:528:DyaK38XhtFWqu7s%3D B. Grill, V. Patel, B. Meyerson, Tribological Behaviour of Diamond-Like Carbon: Effects of Preparation Conditions and Annealing, Surf. Coat. Technol., 1991, 49 (1–3), p 530–536
14. 14. S.C. Veldhuis L.S. Shuster G.S. Fox-Rabinovich 2006 Lubricants to Enhance Tribological Compatibility of the ‘Tool/Workpiece’ Tribosystem G.S. Fox-Rabinovich G. Totten Self-Organization During Friction: Advance Surface Engineered Materials and Systems Design CRC Press, Taylor and Francis Group Boca Raton, NW, USA 381 411 S.C. Veldhuis, L.S. Shuster, G.S. Fox-Rabinovich, Lubricants to Enhance Tribological Compatibility of the ‘Tool/Workpiece’ Tribosystem, Self-Organization During Friction: Advance Surface Engineered Materials and Systems Design. G.S. Fox-Rabinovich, G. Totten (Ed.), (Boca Raton, NW, USA), CRC Press, Taylor and Francis Group, 2006, p 381–411
15. 15. T.W. Pesco Del 1993 Perfluoropolyethers R.L. Shubkin Synthetic Lubricants and High-Performance Functional Liquids Marcel Dekker New York T.W. Del Pesco, Perfluoropolyethers, Synthetic Lubricants and High-Performance Functional Liquids, R.L. Shubkin (Ed.) (New York) Marcel Dekker, 1993
16. 16. E. Konca Y.T. Cheng A.M. Weiner J.M. Dasch A.T. Alpas 2005 Effect of Test Atmosphere on the Tribological Behavior of the Non-Hydrogenated Diamond-Like Carbon Coatings Against 319 Aluminum Alloy and Tungsten Carbide Surf. Coat. Technol. 200 1783 1791 10.1016/j.surfcoat.2005.08.053 1:CAS:528:DC%2BD2MXht1Glsr3N E. Konca, Y.T. Cheng, A.M. Weiner, J.M. Dasch, A.T. Alpas, Effect of Test Atmosphere on the Tribological Behavior of the Non-Hydrogenated Diamond-Like Carbon Coatings Against 319 Aluminum Alloy and Tungsten Carbide, Surf. Coat. Technol., 2005, 200, p 1783–1791
17. 17. B. Bhushan 1990 Magnetic Media Tribology: State of the Art and Future Challenges Wear 136 169 197 10.1016/0043-1648(90)90079-P B. Bhushan, Magnetic Media Tribology: State of the Art and Future Challenges, Wear, 1990, 136, p 169–197
18. 18. H.J. Lee R. Zubeck D. Hollars J.K. Lee A. Chao M. Smallen 1993 Enhanced Tribological Performance of Rigid Disk by Using Chemically Bonded Lubricant J. Vac. Sci. Technol. 11 711 714 10.1116/1.578796 1:CAS:528:DyaK3sXks1Wnt7s%3D H.J. Lee, R. Zubeck, D. Hollars, J.K. Lee, A. Chao, M. Smallen, Enhanced Tribological Performance of Rigid Disk by Using Chemically Bonded Lubricant, J. Vac. Sci. Technol., 1993, 11, p 711–714
19. 19. T. Kato M. Kawaguchi M.M Sajjad J. Choi 2004 Friction and Durability Characteristics of Ultrathin Perfluoropolyether Lubricant Film Composed of Bonded and Mobile Molecular Layers on Diamond-Like Carbon Surfaces Wear 257 909 915 10.1016/j.wear.2004.05.010 1:CAS:528:DC%2BD2cXotlKgsrc%3D T. Kato, M. Kawaguchi, M.M Sajjad, J. Choi, Friction and Durability Characteristics of Ultrathin Perfluoropolyether Lubricant Film Composed of Bonded and Mobile Molecular Layers on Diamond-Like Carbon Surfaces, Wear, 2004, 257, p 909–915
20. 20. D.J. Carré 1990 The Use of Solid Ceramic and Ceramic Hard-Coated Components to Prolong the Performance of Perfluoropolyalkylether Lubricants Surf. Coat. Technol. 43–44 10 609 617 10.1016/0257-8972(90)90005-W D.J. Carré, The Use of Solid Ceramic and Ceramic Hard-Coated Components to Prolong the Performance of Perfluoropolyalkylether Lubricants, Surf. Coat. Technol., 1990, 43–44 (10), p 609–617
21. 21. I.S. Napreev, Control Over Tribological Characteristics of Bearing Units by the Methods of Epilamon Formation, PhD Thesis, Bella Russian State Technology University, (1999)
22. 22. G.S. Fox-Rabinovich A.I. Kovalev D.L. Wainstein L.S. Shuster G.K. Dosbaeva 2002 Improvement of ‘Duplex’ PVD Coatings for HSS Cutting Tools by PFPE (Perfluorpolyether ‘Z-DOL’) Surf. Coat. Technol. 160 1 99 107 10.1016/S0257-8972(02)00378-X 1:CAS:528:DC%2BD38XmtlWhsrg%3D G.S. Fox-Rabinovich, A.I. Kovalev, D.L. Wainstein, L.S. Shuster, G.K. Dosbaeva, Improvement of ‘Duplex’ PVD Coatings for HSS Cutting Tools by PFPE (Perfluorpolyether ‘Z-DOL’), Surf. Coat. Technol., 2002, 160 (1), p 99–107
23. 23. S.C. Veldhuis G.K. Dosbaeva G. Benga 2007 Application of Ultra-Thin Fluorine-Content Lubricating Films to Reduce Tool/Workpiece Adhesive Interaction During Thread-Cutting Operations Int. J. Mach. Tool. Manu. 47 521 528 10.1016/j.ijmachtools.2006.06.003 S.C. Veldhuis, G.K. Dosbaeva, G. Benga, Application of Ultra-Thin Fluorine-Content Lubricating Films to Reduce Tool/Workpiece Adhesive Interaction During Thread-Cutting Operations, Int. J. Mach. Tool. Manu., 2007, 47, p 521–528