Influence of light-polymerization modes on the degree of conversion and mechanical properties of resin composites: A comparative analysis between a hybrid and a nanofilled composite

Operative Dentistry

Volumn 33, Issue 3, 2008, Pages 287-293

  Da Silva, Eduardo Moreira ^a,b   Poskus, Laiza Tatiana ^a   Guimarães, José Guilherme Antunes ^a  

^a FLUMINENSE FEDERAL UNIVERSITY   (Brazil)

^b No 28 Campus Valonguinho ^*  (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMEDICAL AND DENTAL MATERIALS; FILTEK P60 COMPOSITE RESIN; FILTEK SUPREME; NANOPARTICLE; POLYMER; RESIN;

ARTICLE; CHEMISTRY; COMPARATIVE STUDY; ELASTICITY; HARDNESS; HUMAN; INFRARED SPECTROSCOPY; LIGHT; MATERIALS TESTING; MECHANICAL STRESS; PLIABILITY; RADIATION DOSE; RADIATION EXPOSURE; RAMAN SPECTROMETRY; TIME;

COMPOSITE RESINS; DENTAL MATERIALS; ELASTICITY; HARDNESS; HUMANS; LIGHT; MATERIALS TESTING; NANOPARTICLES; PLIABILITY; POLYMERS; RADIATION DOSAGE; SPECTROSCOPY, FOURIER TRANSFORM INFRARED; SPECTRUM ANALYSIS, RAMAN; STRESS, MECHANICAL; TIME FACTORS;

EID: 43449096670     PISSN: 03617734     EISSN: None     Source Type: Journal    
DOI: 10.2341/07-81     Document Type: Article

References (37)

1. Bowen RL (1962) Dental filling material comprising vinylsilane treated fused silica and a binder consisting of the reaction product of bisphenol and glycidyl methacrylate US Patent 3,066,112.
2. Sibold N, Madec JP, Masson S & Pham NT (2002) Synthesis and characterization of (co)polymers containing a phosphonate function for use in dental composites Polymer 43(26) 7257-7267.
3. Chung CM, Kim JG, Kim MS, Kim KM & Kim KN (2002) Development of a new photocurable composite resin with reduced curing shrinkage Dental Materials 18(2) 174-178.
4. Braem M, Finger W, Van Doren VE, Lambrechts P & Vanherle G (1989) Mechanical properties and filler fraction of dental composites Dental Materials 5(5) 346-348.
5. Turssi CP, Ferracane JL & Vogel K (2005) Filler features and their effects on wear and degree of conversion of particulate dental resin composites Biomaterials 26(24) 4932-4937.
6. Kim KH, Ong JL & Okuno O (2002) The effect of filler loading and morphology on the mechanical properties of contemporary composites Journal of Prosthetic Dentistry 87(6) 642-649.
7. Rodrigues Júnior SA, Zanchi CH, Carvalho RV & Demarco FF (2007) Flexural strength and modulus of elasticity of different types of resin-based composites Brazilian Oral Research 21(1) 16-21.
8. th Edition Saunders, St Louis.
9. Mitra SB, Wu D & Holmes BN (2003) An application of nanotechnology in advanced dental materials Journal of the American Dental Association 134(10) 1382-1390.
10. Lu H, Lee YK, Oguri M & Powers JM (2006) Properties of a dental resin composite with a spherical inorganic filler Operative Dentistry 31(6) 734-740.
11. Beun S, Glorieux T, Devaux J, Vreven J & Leloup G (2007) Characterization of nanofilled compared to universal and microfilled composites Dental Materials 23(1) 51-59.
12. Ferracane JL (1985) Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins Dental Materials 1(1) 11-14.
13. Ferracane JL & Greener EH (1986) The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins Journal of Biomedical Materials Research 20(1) 121-131.
14. Asmussen E & Peutzfeldt A (2003) Two-step curing: Influence on conversion and softening of a dental polymer Dental Materials 19(6) 466-470.
15. Emami N, Soderholm KJM & Berglund LA (2003) Effect of light power density variations on bulk curing properties of dental composites Journal of Dentistry 31(3) 189-196.
16. Rahiotis C, Kakaboura A, Loukidis M & Vougiouklakis G (2004) Curing efficiency of various types of light-curing units European Journal of Oral Science 112(1) 89-94.
17. Feilzer AJ, Dooren LH, de Gee AJ & Davidson CL (1995) Influence of light intensity on polymerization shrinkage and integrity of the restoration-cavity interface European Journal of Oral Science 103(5) 322-326.
18. Lim BS, Ferracane JL, Sakaguchi RL & Condon JR (2002) Reduction of polymerization contraction stress for dental composites by two-step light-activation Dental Materials 18(6) 436-444.
19. Sakaguchi RL & Berge HX (1998) Reduced light energy decreases post-gel contraction while maintaining degree of conversion in composites Journal of Dentistry 26(8) 695-700.
20. Mehl A, Hickel R & Kunzelmann KH (1997) Physical properties and gap formation of light-cured composites with and without softstart-polymerization Journal of Dentistry 25(3-4) 321-330.
21. Adabo GL, dos Santos Cruz CA, Fonseca RG & Vaz LG (2003) The volumetric fraction of inorganic particles and the flexural strength of composites for posterior teeth Journal of Dentistry 31(5) 353-359.
22. Chung KH & Greener EH (1990) Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins Journal of Oral Rehabilitation 17(5) 487-494.
23. Calheiros FC, Kawano Y, Stansbury JW & Braga RR (2006) Influence of radiant exposure on contraction stress, degree of conversion and mechanical properties of resin composites Dental Materials 22(9) 799-803.
24. Aguiar FHB, Braceiro ATB, Ambrosano GMB & Lovadino JR (2005) Hardness and diametral tensile strength of a hybrid composite resin polymerized with different modes and immersed in ethanol or distilled water media Dental Materials 21(12) 1098-1103.
25. Emami N & Söderholm KJM (2003) How light irradiance and curing time affect monomer conversion in light-cured resin composites European Journal of Oral Science 111(6) 536-542.
26. Halvorson RH, Erickson RL & Davidson CL (2002) Energy dependent polymerization of resin-based composite Dental Materials 18(6) 463-469.
27. Arikawa H, Fujii K, Kanie T & Inoue K (1998) Light transmittance characteristics of light-cured composite resins Dental Materials 14(6) 405-411.
28. Danesh G, Davids H, Reinhardt KJ, Ott K & Schäfer E (2004) Polymerisation characteristics of resin composites polymerized with different curing units Journal of Dentistry 32(6) 479-488.
29. Lohbauer U, Rahiots C, Krämer N, Petschelt A & Eliades G (2005) The effects of different light-curing units on fatigue behavior and degree of conversion of a resin-composite Dental Materials 21(7) 608-615.
30. Watts DC (2005) Reaction kinetics and mechanics in photo-polymerised networks Dental Materials 21(1) 27-35.
31. Chung KH (1990) The relationship between composition and properties of posteriors resin composites Journal of Dental Research 69(3) 852-856.
32. Sobrinho LC, Goes MF, Consani S, Sinhoreti MAC & Knowles JC (2000) Correlation between light intensity and exposure time on the hardness of composite resin Journal of Materials Science: Materials in Medicine 11(6) 361-364.
33. Asmussen E & Peutzfeldt A (2001) Influence of pulse-delay curing on softening of polymer structures Journal of Dental Research 80(6) 1570-1573.
34. Soh MS & Yap AUJ (2004) Influence of curing modes on crosslink density in polymer structures Journal of Dentistry 32(4) 321-326.
35. Vandewalle KS, Ferracane JL, Hilton TJ, Erickson RL & Sakaguchi RL (2004) Effect of energy density on properties and marginal integrity of posterior resin composite restorations Dental Materials 20(1) 96-106.
36. Price RBT, Murphy DG & Dérand T (2000) Light energy transmission through cured resin composite and human dentin Quintessence International 31(9) 659-667.
37. Braem M, Lambrechts P, Van Doren V & Vanherle G (1985) The impact of composite structure on its elastic response Journal of Dental Research 65(5) 648-653.