Structuring of dielectric and metallic materials with ultrashort laser pulses between 20 fs and 3 ps

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 2991, Issue , 1997, Pages 40-47

  Krüger, Jörg ^a   Kautek, Wolfgang ^a   Lenzner, Matthias ^b   Sartania, Sasa ^b   Spielmann, Christian ^b   Krausz, Ferenc ^b  

^a BAM FEDERAL INSTITUTE FOR MATERIALS RESEARCH AND TESTING   (Germany)

^b VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

Author keywords

Ablation; Femtosecond pulse laser; Glass; Laser processing; Micromachining; Silica; Steel; Structuring

Indexed keywords

ABLATION; ALUMINA; BARIUM; BOROSILICATE GLASS; COMPOSITE MICROMECHANICS; CORUNDUM; DIELECTRIC MATERIALS; ELECTROMAGNETIC PULSE; FUSED SILICA; GLASS; LASER APPLICATIONS; LASER BEAMS; LASERS; MACHINING; MICROMACHINING; OXIDES; PULSE GENERATORS; SILICA; STAINLESS STEEL; STEEL; TITANIUM; ULTRASHORT PULSES;

ABLATION THRESHOLDS; FEMTOSECOND PULSE LASER; LASER PROCESSING; NANOSECOND RANGE; PHYSICAL MECHANISMS; PULSE DURATION (PD); PULSE LASER; STRUCTURING; TI: SAPPHIRE LASERS;

PULSED LASER APPLICATIONS;

EID: 4344567876     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.273740     Document Type: Conference Paper

References (26)

1. J.-C. Diels and W. Rudolph, "Ultrashort laser pulse phenomena", chapter 5 and 6, Academic Press, San Diego, 1996.
2. M.D. Perry and G. Mourou, "Terawatt to petawatt subpicosecond lasers", Science 264, pp. 917-924, 1994.
3. F. Krausz, M.E. Fermann, T. Brabec, P.F. Curley, M. Hofer, M.H. Ober, C. Spielmann, E. Wintner, and A.J. Schmidt, "Femtosecond solid-state lasers", IEEE J. Quant. Electr. QE-28, pp. 2097-2122, 1992.
4. M. Lenzner, C. Spielmann, E. Wintner, F. Krausz, and A.J. Schmidt, "Sub-20-fs, kilohertz-repetition-rate Ti:sapphire amplifier", Opt. Lett. 20, pp. 1397-1399, 1995.
5. W. Kautek and J. Krüger, "Femtosecond-pulse laser ablation of metallic, semiconducting, ceramic, and biological materials", SPIE Vol. 2207, pp. 600-611, 1994.
6. W. Kautek and J. Krüger, "Femtosecond-pulse laser microstructuring of semiconducting materials", Semiconductor Processing and Characterization with Lasers, Materials Science Forum Vols. 173-174, Trans Tech Publications, Switzerland, pp.17-22, 1995.
7. J. Krüger and W. Kautek, "Femtosecond-pulse laser processing of metallic and semiconducting thin films", SPIE Vol. 2403, pp. 436-447, 1995.
8. J. Krüger and W. Kautek, "Femtosecond-pulse visible laser processing of transparent materials", Appl. Surf Sci. 96-98, pp. 430-438, 1996.
9. J. Krüger and W. Kautek, "Femtosecond-pulse visible laser processing of fibre composite materials", Appl. Surf. Sci. 106, pp. 383-389, 1996.
10. W. Kautek, S. Mitterer, J. Krüger, W. Husinsky, and G. Grabner, "Femtosecond-pulse laser ablation of human corneas", Appl. Phys. A58, pp. 513-518, 1994.
11. R. Srinivasan, E. Sutcliffe, and B. Braren, "Ablation and etching of polymethylmethacrylate by very short (160 fs) ultraviolet (308 nm) laser pulses", Appl. Phys. Lett. 51, pp. 1285-1287, 1987.
12. S. Küper and M. Stuke, "Femtosecond UV excimer laser ablation", Appl. Phys. B44, pp. 199-204, 1987.
13. B. Wolff-Rottke, J. Ihlemann, H. Schmidt, and A. Scholl, "Influence of the laser-spot diameter on photo-ablation rates", Appl. Phys. A60, pp. 13-17, 1995.
14. 2 with pulse widths from 7 ns to 150 fs", Appl. Phys. Lett. 64, pp. 3071-3073, 1994.
15. B.C. Stuart, M.D. Feit, A.M. Rubenchik, B.W. Shore, and M.D. Perry, "Laser-induced damage in dielectrics with nanosecond to subpicosecond pulses", Phys. Rev. Lett. 74, pp. 2248-2251, 1995.
16. B.C. Stuart, M.D. Feit, S. Herman, A.M. Rubenchik, B.W. Shore, and M.D. Perry, "Optical ablation by high-power short-pulse lasers", J. Opt. Soc. Amer. B13, pp. 459-468, 1996.
17. 2 with picosecond and femtosecond laser pulses", Appl. Phys. A62, pp. 293-294, 1996.
18. C. Momma, B.N. Chicbkov, S. Nolte, F. von Alvensleben, A. Tünnermann, H. Welling, and B. Wellegehausen, "Short-pulse laser ablation of solid targets", Opt. Commun. 129, pp. 134-142, 1996.
19. F. H. Loesel, M.H. Niemz, J.F. Bille, and T. Juhasz, "Laser-induced optical breakdown on hard and soft tissues and its dependence on the pulse duration: Experiment and model", IEEE J. Quant. Electr. QE-32, pp. 1717-1722, 1996.
20. W. Kautek, J. Krüger, M. Lenzner, S. Sartania, C. Spielmann, and F. Krausz, "Laser ablation of dielectrics with pulse durations between 20 fs and 3 ps", Appl. Phys. Lett. 69, pp. 3146-3148, 1996.
21. J. Krüger and W. Kautek, "Sub-picosecond-pulse laser machining of advanced materials", In: F. Dausinger, H.W. Bergmann, and J. Sigel (Eds.), Proceedings of the 6th European Conference on Laser Treatment of Materials (ECLAT'96, Stuttgart), pp. 691-698, 1996.
22. J. Krüger, W. Kautek, M. Lenzner, S. Sartania, C. Spielmann, and F. Krausz, "Laser micromachining of barium aluminium borosilicate glass with pulse durations between 20 fs and 3 ps", in publication.
23. N. Bloembergen, "Laser-induced electric breakdown in solids", IEEE J. Quant. Electr. QE-10, pp. 375-386, 1974.
24. L.V. Keldysh, "Ionization in the field of a strong electromagnetic wave", Soy. Phys. JETP 20, pp. 1307-1314, 1965.
25. B.N. Chichkov, C. Momma, S. Nolte, F. von Alvensleben, and A. Tünnennann, "Femtosecond, picosecond and nanosecond laser ablation of solids", Appl. Phys. A63, pp. 109-115, 1996.
26. German and European standard concept for pulse laser processing, 1996.