The friction and wear properties of Ti-Al-Nb intermetallics by plasma surface alloying

Tribology Letters

Volumn 30, Issue 1, 2008, Pages 61-67

  Wu, Hongyan ^a   Zhang, Pingze ^b   Li, Jianliang ^b   Hussain, G ^a   Xu, Zhong ^a  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

^b NANJING UNIVERSITY OF SCIENCE AND TECHNOLOGY   (China)

Author keywords

Friction reducing; Hardness; Surface modification; Wear resistant coatings

Indexed keywords

ELASTIC MODULI; HARDNESS; MICROSTRUCTURE; SURFACE TREATMENT; TITANIUM ALLOYS;

PLASMA CHROMIZING; WEAR-RESISTANT COATINGS;

INTERMETALLICS;

ELASTIC MODULI; HARDNESS; INTERMETALLICS; MICROSTRUCTURE; SURFACE TREATMENT; TITANIUM ALLOYS;

EID: 43349089423     PISSN: 10238883     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11249-008-9314-5     Document Type: Article

References (16)

1. 1. S.J. Yang S.W. Nam H. Masuo 2004 Abnormal acceleration of creep deformation rate above 700°C in the orthorhombic based Ti–22Al–27Nb alloy J. Alloys Compd. 368 197 210 10.1016/j.jallcom.2003.08.078 1:CAS:528:DC%2BD2cXisVegtbo%3D Yang, S.J., Nam, S.W., Masuo, H.: Abnormal acceleration of creep deformation rate above 700°C in the orthorhombic based Ti–22Al–27Nb alloy. J. Alloys Compd. 368, 197–210 (2004)
2. 2. L. Germann D. Banerjee J.Y. Gue´dou 2005 Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide Intermetallics 13 920 924 10.1016/j.intermet.2004.12.003 1:CAS:528:DC%2BD2MXksVylsL8%3D Germann, L., Banerjee, D., Gue´dou, J.Y., et al.: Effect of composition on the mechanical properties of newly developed Ti2AlNb-based titanium aluminide. Intermetallics 13, 920–924 (2005)
3. 3. K. Miyoshi B.A. Lerch S.L. Draper 2003 Fretting wear of Ti-48Al-2Cr-2Nb Tribol. Int. 36 145 153 10.1016/S0301-679X(02)00142-1 1:CAS:528:DC%2BD38XptFGrtrs%3D Miyoshi, K., Lerch, B.A., Draper, S.L.: Fretting wear of Ti-48Al-2Cr-2Nb. Tribol. Int. 36, 145–153 (2003)
4. 4. J.H. Peng Y. Mao S.Q. Li 2001 Microstructure controlling by heat treatment and complex processing for Ti2AlNb-based alloys Mater. Sci. Eng. A 299 75 80 10.1016/S0921-5093(00)01417-9 Peng, J.H., Mao, Y., Li, S.Q., et al.: Microstructure controlling by heat treatment and complex processing for Ti2AlNb-based alloys. Mater. Sci. Eng. A 299, 75–80 (2001)
5. 5. S.J. Yang S.W. Nam H. Masuo 2004 Investigation of creep deformation mechanisms and environmental effects on creep resistance in a Ti2AlNb-based intermetallic alloy Intermetallics 12 261 274 10.1016/j.intermet.2003.10.009 1:CAS:528:DC%2BD2cXotlSktw%3D%3D Yang, S.J., Nam, S.W., Masuo, H.: Investigation of creep deformation mechanisms and environmental effects on creep resistance in a Ti2AlNb-based intermetallic alloy. Intermetallics 12, 261–274 (2004)
6. 6. Z. Xu Y. Gao 2002 Plasma surface metallurgy technology J. Adv. Mater. 34 32 38 1:CAS:528:DC%2BD38XltlOqsL0%3D Xu, Z., Gao, Y.: Plasma surface metallurgy technology. J. Adv. Mater. 34, 32–38 (2002)
7. 7. X. Zhang X.S. Xie Z.M. Yang 2000 A study of nickel-based corrosion resisting alloy layer obtained by double glow plasma surface alloying technique Surf. Coat Technol. 131 378 382 10.1016/S0257-8972(00)00818-5 1:CAS:528:DC%2BD3cXptVKku7Y%3D Zhang, X., Xie, X.S., Yang, Z.M., et al.: A study of nickel-based corrosion resisting alloy layer obtained by double glow plasma surface alloying technique. Surf. Coat Technol. 131, 378–382 (2000)
8. 8. R. Colaco R. Vilar 2003 Abrasive wear of metallic matrix reinforced materials Wear 255 643 650 10.1016/S0043-1648(03)00074-7 1:CAS:528:DC%2BD3sXls1Oiurg%3D Colaco, R., Vilar, R.: Abrasive wear of metallic matrix reinforced materials. Wear 255, 643–650 (2003)
9. 9. N.S. Ghaleb B.H. Gar 1998 Dynamic SIMS study of Cr 3 C 2, Cr 7 C 3 and Cr 23 C 6 Appl. Surf. Sci. 134 194 196 10.1016/S0169-4332(98)00246-3 Ghaleb, N.S., Gar, B.H.: Dynamic SIMS study of Cr 3 C 2, Cr 7 C 3 and Cr 23 C 6. Appl. Surf. Sci. 134, 194–196 (1998)
10. 10. C. Jiang D.J. Sordelet B. Gleeson 2006 Site preference of ternary alloying elements in Ni3Al: a first-principles study Acta Mater. 54 1147 1154 10.1016/j.actamat.2005.10.039 1:CAS:528:DC%2BD28XnvVGjtQ%3D%3D Jiang, C., Sordelet, D.J., Gleeson, B.: Site preference of ternary alloying elements in Ni3Al: a first-principles study. Acta Mater. 54, 1147–1154 (2006)
11. 11. M. Lichinchi C. Lenardi J. Haupt 1998 Simulation of Berkovich nanoindentation experiments on thin films using finite element method Thin Solid Films 312 240 248 10.1016/S0040-6090(97)00739-6 1:CAS:528:DyaK1cXhtlOntb4%3D Lichinchi, M., Lenardi, C., Haupt, J., et al.: Simulation of Berkovich nanoindentation experiments on thin films using finite element method. Thin Solid Films 312, 240–248 (1998)
12. 12. W.C. Oliver G.M. Pharr 1998 Measurement of mechanical properties by ultra-low load indentation[J] Mater. Sci. Eng. A253 151 159 Oliver, W.C., Pharr, G.M.: Measurement of mechanical properties by ultra-low load indentation[J]. Mater. Sci. Eng. A253, 151–159 (1998)
13. 13. W.C. Oliver G.M. Pharr 1992 An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments J. Mater. Res. 7 1564 1583 10.1557/JMR.1992.1564 1:CAS:528:DyaK38XktlWqtb4%3D Oliver, W.C., Pharr, G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564–1583 (1992)
14. 14. Q. Miao C.E. Cui J.D. Pan 2006 Tribological behavior of magnesium alloy AZ91 coated with TiN/CrN by arc-glow plasma depositing Chin. J. Aeronaut. 19 266 270 Miao, Q., Cui, C.E., Pan, J.D., et al.: Tribological behavior of magnesium alloy AZ91 coated with TiN/CrN by arc-glow plasma depositing. Chin. J. Aeronaut. 19, 266–270 (2006)
15. 15. H.G. Jung D.J. Jung K.Y. Kim 2002 Effect of Cr addition on the properties of aluminide coating layers formed on TiAl alloys Surf. Coat. Technol. 154 75 81 10.1016/S0257-8972(01)01716-9 1:CAS:528:DC%2BD38Xhs1ymtb8%3D Jung, H.G., Jung, D.J., Kim, K.Y.: Effect of Cr addition on the properties of aluminide coating layers formed on TiAl alloys. Surf. Coat. Technol. 154, 75–81 (2002)
16. 16. Y.W. Bao W. Wang Y.C. Zhou 2004 Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements Acta Mater. 52 5397 5404 10.1016/j.actamat.2004.08.002 1:CAS:528:DC%2BD2cXns1ertb4%3D Bao, Y.W., Wang, W., Zhou, Y.C.: Investigation of the relationship between elastic modulus and hardness based on depth-sensing indentation measurements. Acta Mater. 52, 5397–5404 (2004)