The Denavit and Hartenberg approach applied to evaluate the consequences in the tool tip position of geometrical errors in five-axis milling centres

International Journal of Advanced Manufacturing Technology

Volumn 37, Issue 1-2, 2008, Pages 122-139

  Lopez De Lacalle L N ^a   Lamikiz, A ^a   Ocerin, O ^a   Diez D ^a   Maidagan, E ^b  

^a UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

^b TECNALIA RESEARCH AND INNOVATION   (Spain)

Author keywords

Accuracy; Geometrical errors; Multi axis machining centres; Precision

Indexed keywords

COMPUTATIONAL GEOMETRY; DRILLING; MATHEMATICAL TRANSFORMATIONS; MATRIX ALGEBRA; PARAMETER ESTIMATION;

GEOMETRICAL ERRORS; MULTI-AXIS MACHINING CENTERS; REAL TRANSFORMATION MATRIX; TOOL TIP POSITION;

ERROR ANALYSIS;

EID: 43249122677     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-007-0956-5     Document Type: Article

References (40)

1. Rahman M (2004) Modeling and measurement of multi-axis machine tools to improve positioning accuracy in a software way. PhD thesis, University of Oulu, Finland
2. Ramesh R, Mannan MA, Poo AN (2000) Error compensation in machine tools-a review. Part I: geometric, cutting-force induced and fixture-dependent errors. Int J Mach Tools Manuf 40(9):1235-1256
3. Slocum AH (1992) Precision machine design. Prentice Hall, Englewood Cliffs, New Jersey
4. Tsutsumi M, Saito A (2004) Identification of angular and positional deviations inherent to 5-axis machining centers with a tilting-rotary table by simultaneous four-axis control movements. Int J Mach Tools Manuf 44(12-13):1333-1342
5. Elbestawit MA, Srivasta AK, Veldhuis SC (1995) Modelling geometric and thermal errors in a five-axis CNC machine tool. Int J Mach Tools Manuf 35(9):1321-1337
6. Nawara L, Kowalski J, Sladek J (1989) The influence of kinematic errors on the profile shapes by means of CMM. CIRP Annals 38(1):511-516
7. Soons JA, Theuws FC, Schllekens PH (1992) Modeling the errors of multi-axis machines: a general methodology. Precis Eng 14(1):5-19
8. Suh S-H, Lee J-J, Kim S-K (1998) Multiaxis machining with additional-axis NC system: theory and development. Int J Adv Manuf Technol 14(12):865-875
9. Ferreira PM, Liu CR (1989) An analytical quadratic model for the geometric errors of a machine tool. J Manuf Syst 5(1):51-63
10. Mou J, Liu CR (1995) A method for enhancing the accuracy of CNC machine tools for on-machine inspection. J Manuf Syst 11(4):229-237
11. Sørby K (2006) Inverse kinematics of five-axis machines near singular configurations. Int J Mach Tools Manuf (in press). Available online 15 May 2006
12. Cho JH, Cho MW, Kim K (1994) Volumetric error analysis of a multi-axis machine tool machining a sculptured surface workpiece. Int J Prod Res 32(2):345-363
13. Jha BK, Kumar A (2003) Analysis of geometric errors associated with five-axis machining centre in improving the quality of cam profile. Int J Mach Tools Manuf 43(6):629-636
14. Lei WT, Hsu YY (2002) Accuracy test of five-axis CNC machine tool with 3D probe-ball. Part II: errors estimation. Int J Mach Tools Manuf 42(10):1163-1170
15. Lin PD, Ehmann KF (1993) Direct volumetric error evaluation for multi-axis machines. Int J Mach Tools Manuf 33(5):675-693
16. Lee R-S, She C-H (1997) Developing a postprocessor for three types of five-axis machine tools. Int J Adv Manuf Technol 13(9):658-665
17. Lin Y, Shen Y (2003 ) Modelling of five-axis machine tool metrology models using the matrix summation approach. Int J Adv Manuf Technol 21(4):243-248
18. Mahbubur RMD, Heikkala J, Lappalainen K, Karjalainen JA (1997) Positioning accuracy improvement in five-axis milling by post processing. Int J Mach Tools Manuf 37(2):223-236
19. Tutunea-Fatan OR, Feng H-Y (2004) Configuration analysis of five-axis machine tools using a generic kinematic model. Int J Mach Tools Manuf 44(11):1235-1243
20. Moon S-K, Moon Y-M, Kota S (2001) Screw theory based metrology for design and error compensation of machine tools. In: Proceedings of the ASME 2001 Design Engineering Technical Conferences (DETC 2001), Pittsburgh, Pennsylvania, September 2001
21. Lee E-S, Suh S-H, Shon J-W (1998) A comprehensive method for calibration of volumetric positioning accuracy of CNC-machines. Int J Adv Manuf Technol 14(1):43-49
22. Raksiri C, Parnichkun M (2004) Geometric and force errors compensation in a 3-axis CNC milling machine. Int J Mach Tools Manuf 44(12-13):1283-1291
23. Chen G, Yuan J, Ni J (2001) A displacement measurement approach for machine geometric error assessment. Int J Mach Tools Manuf 41(1):149-161
24. Sartori S, Zhang GX (1995) Geometric error measurement and compensation of machines. CIRP Annals 44(2):599-609
25. Fan K, Lin J, Lu S (1996) Measurement and compensation of thermal error on a machining center. In: Proceedings of the 4th International Conference on Automation Technology, Hsinchu, Taiwan, July 1996, pp 261-268
26. Salgado MA, López de Lacalle LN, Lamikiz A, Muñoa J, Sánchez J (2005) Evaluation of the stiffness chain on the deflection of end-mills under cutting forces. Int J Mach Tools Manuf 45(6):727-739
27. Uriarte L, Herrero A, Zatarain M, Santiso G, Lopéz de Lacalle LN, Lamikiz A, Albizuri J (2006) Error budget and stiffness chain assessment in a micromilling machine equipped with tools less than 0.3 mm in diameter. Precis Eng (in press). Available online 28 February 2006
28. Armarego EJA, Deshpande NP (1991) Computerized end-milling force predictions with cutting models allowing for eccentricity and cutter deflections. CIRP Annals 40(1):25-29
29. López de Lacalle LN, Lamikiz A, Sánchez JA, Salgado MA (2004) Effects of tool deflection in the high-speed milling of inclined surfaces. Int J Adv Manuf Technol 24(9-10):621-631
30. Kim GM, Kim BH, Chu CN (2003) Estimation of cutter deflection and form error in ball-end milling process. Int J Mach Tools Manuf 43(9):917-924
31. López de Lacalle LN, Lamikiz A, Sánchez JA, Salgado MA (2006) Toolpath selection based on the minimum deflection cutting forces in the programming of complex surfaces milling. Int J Mach Tools Manuf (in press). Corrected proof, available online 11 May 2006
32. Ikua BW, Tanaka H, Obata F, Sakamoto S (2001) Prediction of cutting forces and machining error in ball end milling of curved surfaces-I theoretical analysis. Precis Eng 25(4):266-273
33. Donaldson RR (1980) Error budgets. In: Hocken RJ (ed) Technology of machine tools, vol 5: machine tool accuracy, Chap 9: machine tool task force, Lawrence Livermore, Berkeley, California
34. Walter MM, Norlund B, Koning RJ, Roblee JW (2002) Error budget as a design tool for ultra-precision diamond turning machines. In: Proceedings of the ASPE's 17th Annual Meeting, St. Louis, Missouri, October 2002
35. Treib T, Matthias E (1987) Error budgeting: applied to the calculation and optimization of the volumetric error field of multiaxis systems. CIRP Annals 36(1):365-368
36. ISO 230-1:1996 Test code for machine tools. Part 1: geometric accuracy of machines operating under no-load or quasi-static conditions
37. ISO 10791-2:2001 Test conditions for machining centres. Part 2: geometric tests for machines with vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis)
38. ISO 10791-1:1998 Test conditions for machining centres. Part 1: geometric tests for machines with horizontal spindle and with accessory heads (horizontal Z-axis)
39. Okafor AC, Ertekin YM (2000) Vertical machining center accuracy characterization using laser interferometer. Part 1. Linear positional errors. J Mater Process Technol 105(3):394-406
40. Zargarbashi SHH, Mayer JRR (2006) Assessment of machine tool trunnion axis motion error, using magnetic double ball bar. Int J Mach Tools Manuf 46(14):1823-1834