Effectiveness of different adhesive primers on the bond strength between an indirect composite resin and a base metal alloy

Journal of Prosthetic Dentistry

Volumn 99, Issue 5, 2008, Pages 377-387

  Sarafianou, Aspasia ^a   Seimenis, Ioannis ^a   Papadopoulos, Triantafillos ^a  

^a UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM OXIDE; BIOMEDICAL AND DENTAL MATERIALS; CHROMIUM DERIVATIVE; METAL PRIMER; METHACRYLIC ACID DERIVATIVE; RESIN; ROCATEC; SINFONY; SOLIDEX; TOOTH CEMENT;

ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL ETCHING; DENTURE; ELECTRON PROBE MICROANALYSIS; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PARTICLE SIZE; PRESSURE; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTY; TEMPERATURE; TIME;

ALUMINUM OXIDE; CHROMIUM ALLOYS; COMPOSITE RESINS; DENTAL BONDING; DENTAL CEMENTS; DENTAL ETCHING; DENTAL MATERIALS; DENTAL VENEERS; ELECTRON PROBE MICROANALYSIS; HUMANS; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; PARTICLE SIZE; PRESSURE; SHEAR STRENGTH; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS;

EID: 43049109918     PISSN: 00223913     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0022-3913(08)60086-4     Document Type: Article

References (32)

1. Berge M. Properties of prosthetic resin-veneer materials processed in commercial laboratories. Dent Mater 3 (1989) 77-82
2. Jones R., Goodacre C., Moore B., and Dykema R. A comparison of the physical properties of four prosthetic veneering materials. J Prosthet Dent 61 (1989) 38-44
3. Staffanou R., Hembree Jr. J., Rivers J., and Myers M. Abrasion resistance of three types of esthetic veneering materials. J Prosthet Dent 53 (1985) 309-310
4. Shue S., Nicholls J., and Townsend J. The effect of metal retentive designs on resin veneer retention. J Prosthet Dent 58 (1987) 297-305
5. Barzilay I., Myers M., Cooper L., and Graser G. Mechanical and chemical retention of laboratory cured composite to metal surfaces. J Prosthet Dent 59 (1988) 131-137
6. Staffanou R., Hembree Jr. J., Rivers J., Myers M., and Kilgore J. Leakage study of three esthetic veneering materials. J Prosthet Dent 54 (1985) 204-206
7. Jones R., Moore B., Goodacre C., and Munoz-Viveros C. Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys. J Prosthet Dent 65 (1991) 221-228
8. Matsumura H., Kawahara M., Tanaka T., and Atsuta M. Surface preparations for metal frameworks of composite resin veneered prostheses made with an adhesive opaque resin. J Prosthet Dent 66 (1991) 10-15
9. Tanaka T., Fujiyama E., Shimuzu H., Takaki A., and Atsuta M. Surface treatment of nonprecious alloys for adhesion-fixed partial dentures. J Prosthet Dent 55 (1986) 456-462
10. Laufer B., Nicholls J., and Townsend J. SiOx-C coating: a composite-to-metal bonding mechanism. J Prosthet Dent 60 (1988) 320-327
11. Ozcan M., Pfeiffer P., and Nergiz I. A brief history and current status of metal- and ceramic surface-conditioning concepts for resin bonding in dentistry. Quintessence Int 29 (1998) 713-724
12. Hansson O., and Moberg L. Evaluation of three silicoating methods for resin-bonded prostheses. Scand J Dent Res 101 (1993) 243-251
13. Yoshida K., Kamada K., Sawase T., and Atsuta M. Effect of three adhesive primers for a noble metal on the shear bond strengths of three resin cements. J Oral Rehabil 28 (2001) 14-19
14. Kourtis S. Bond strengths of resin-to-metal bonding systems. J Prosthet Dent 78 (1997) 136-145
15. van der Veen H., Krajenbrink T., Bronsdijk B., and van de Poel F. Resin bonding of tin electroplated precious metal fixed partial dentures: one-year clinical results. Quintessence Int 17 (1986) 299-301
16. Matsumura H., Taira Y., and Atsuta M. Adhesive bonding of noble metal alloys with a triazine dithiol derivative primer and an adhesive resin. J Oral Rehabil 26 (1999) 877-882
17. Kim J., Pfeiffer P., and Niedermeier W. Effect of laboratory procedures and thermocycling on the shear bond strength of resin-metal bonding systems. J Prosthet Dent 90 (2003) 184-189
18. Kern M., and Thompson V. Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy. Dent Mater 9 (1994) 19-25
19. Yoshida K., Taira Y., Matsumura H., and Atsuta M. Effect of adhesive metal primers on bonding a prosthetic composite resin to metals. J Prosthet Dent 69 (1993) 357-362
20. Matsumura H., and Leinfelder K. Effect of an adhesive primer on the integrity of occlusal veneer-metal interface and wear of composite resin veneered restorations. J Prosthet Dent 70 (1993) 296-299
21. Almilhatti H., Giampaolo E., Vergani G., Machado A., and Pavarina A. Shear bond strength of aesthetic materials bonded to Ni-Cr alloy. J Dent 31 (2003) 205-212
22. Yoshida K., Taira Y., Sawase T., and Atsuta M. Effects of adhesive primers on bond strength of self-curing resin to cobalt-chromium alloy. J Prosthet Dent 77 (1997) 617-620
23. Matsumura H., Yanagida H., Tanoue N., Atsuta M., and Shimoe S. Shear bond strength of resin composite material to gold alloy with varying metal surface preparations. J Prosthet Dent 86 (2001) 315-319
24. Yanagida H., Matsumura H., and Atsuta M. Bonding of prosthetic composite material to Ti-6Al-7Nb alloy with eight metal conditioners and a surface modification technique. Am J Dent 14 (2001) 291-294
25. Petridis H., Garefis P., Hirayama H., Kafantaris N., and Koidis P. Bonding indirect resin composites to metal: Part 1. Comparison of shear bond strengths between different metal-resin bonding systems and a metal-ceramic system. Int J Prosthodont 16 (2003) 635-639
26. Kern M., and Thompson V. Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability. J Prosthet Dent 73 (1995) 240-249
27. Kern M., and Thompson V. Sandblasting and silica-coating of dental alloys: volume loss, morphology and changes in the surface composition. Dent Mater 9 (1993) 155-161
28. Papadopoulos T., Tsetsekou A., and Eliades G. Effect of aluminum oxide sandblasting on cast commercially pure titanium surfaces. Eur J Prosthodont Rest Dent 7 (1999) 15-21
29. Petridis H., Garefis P., Hirayama H., Kafantaris N., and Koidis P. Bonding indirect resin composites to metal: part 2. Effect of alloy surface treatment on elemental composition of alloy and bond strength. Int J Prosthodont 17 (2004) 77-82
30. Mukai M., Fukui H., and Hasegawa I. Relationship between sandblasting and composite resin-alloy bond strength by a silica coating. J Prosthet Dent 74 (1995) 151-155
31. ISO 10477:2004. Dentistry-polymer-based crown and bridge materials. International Organization for Standardization. Geneva, Switzerland. Available at http://www.iso.org/iso/store.htm.
32. Seimenis I., Sarafianou A., Papadopoulou H., and Papadopoulos T. Shear bond strength of three veneering resins to a Ni-Cr alloy using two bonding procedures. J Oral Rehabil 33 (2006) 600-608