메뉴 건너뛰기




Volumn 16, Issue 6, 2003, Pages 635-639

Bonding Indirect Resin Composites to Metal: Part 1. Comparison of Shear Bond Strengths Between Different Metal-Resin Bonding Systems and a Metal-Ceramic System

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE AGENT; ALLOY; RESIN CEMENT;

EID: 0348112455     PISSN: 08932174     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article
Times cited : (22)

References (35)
  • 1
    • 0031308176 scopus 로고    scopus 로고
    • Second generation laboratory composite resins for indirect restorations
    • Touati B, Aidan N. Second generation laboratory composite resins for indirect restorations. J Esthet Dent 1997;9:108-118.
    • (1997) J Esthet Dent , vol.9 , pp. 108-118
    • Touati, B.1    Aidan, N.2
  • 2
    • 0032060369 scopus 로고    scopus 로고
    • Aesthetic guidelines for second-generation indirect inlay and onlay composite restorations
    • Miara P. Aesthetic guidelines for second-generation indirect inlay and onlay composite restorations. Pract Periodontics Aesthet Dent 1998;10:423-431.
    • (1998) Pract Periodontics Aesthet Dent , vol.10 , pp. 423-431
    • Miara, P.1
  • 3
    • 0031137696 scopus 로고    scopus 로고
    • New developments in resin restorative systems
    • Leinfelder KF. New developments in resin restorative systems. J Am Dent Assoc 1997;128:573-581.
    • (1997) J Am Dent Assoc , vol.128 , pp. 573-581
    • Leinfelder, K.F.1
  • 4
    • 0028390612 scopus 로고
    • Resin to metal bonding: Overcoming esthetic problems
    • Leinfelder KF. Resin to metal bonding: Overcoming esthetic problems. J Am Dent Assoc 1994;125:292-294.
    • (1994) J Am Dent Assoc , vol.125 , pp. 292-294
    • Leinfelder, K.F.1
  • 5
    • 0007617989 scopus 로고
    • Metal-resin bonding
    • Albers HF. Metal-resin bonding. Adept Rep 1991;2:25-40.
    • (1991) Adept Rep , vol.2 , pp. 25-40
    • Albers, H.F.1
  • 8
    • 0023958368 scopus 로고
    • Mechanical and chemical retention of laboratory cured composite to metal surfaces
    • Barzilay I, Myers ML, Cooper LB, Graser GN. Mechanical and chemical retention of laboratory cured composite to metal surfaces. J Prosthet Dent 1988;59:131-137.
    • (1988) J Prosthet Dent , vol.59 , pp. 131-137
    • Barzilay, I.1    Myers, M.L.2    Cooper, L.B.3    Graser, G.N.4
  • 9
    • 0026113427 scopus 로고
    • Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys
    • Jones RM, Goodacre C, Muñoz-Viveros C. Microleakage and shear bond strength of resin and porcelain veneers bonded to cast alloys. J Prosthet Dent 1991;65:221-228.
    • (1991) J Prosthet Dent , vol.65 , pp. 221-228
    • Jones, R.M.1    Goodacre, C.2    Muñoz-Viveros, C.3
  • 10
    • 0026177779 scopus 로고
    • Microleakage at the resin-alloy interface of chemically retained composite resins for cast restorations
    • Strygler H, Nicholls JI, Townsend JD. Microleakage at the resin-alloy interface of chemically retained composite resins for cast restorations. J Prosthet Dent 1991;65:733-739.
    • (1991) J Prosthet Dent , vol.65 , pp. 733-739
    • Strygler, H.1    Nicholls, J.I.2    Townsend, J.D.3
  • 11
    • 0025417174 scopus 로고
    • Factors influencing metal-resin tensile bond strength to filled composites
    • Lüthy H, Marinello CP, Schärer P. Factors influencing metal-resin tensile bond strength to filled composites. Dent Mater 1990;6: 73-77.
    • (1990) Dent Mater , vol.6 , pp. 73-77
    • Lüthy, H.1    Marinello, C.P.2    Schärer, P.3
  • 12
    • 0026824655 scopus 로고
    • Shear strength of laboratory-processed composite resins bonded to a silane-coated nickel-chromium-beryllium alloy
    • Kolodney H, Puckett A, Kistenmacher BJ, Weems MD. Shear strength of laboratory-processed composite resins bonded to a silane-coated nickel-chromium-beryllium alloy. J Prosthet Dent 1992;67:419-422.
    • (1992) J Prosthet Dent , vol.67 , pp. 419-422
    • Kolodney, H.1    Puckett, A.2    Kistenmacher, B.J.3    Weems, M.D.4
  • 14
    • 0026863840 scopus 로고
    • Bond strength of composites to etched and silica-coated porcelain fusing alloys
    • Schneider W, Powers JM, Pierpont HP. Bond strength of composites to etched and silica-coated porcelain fusing alloys. Dent Mater 1992;8:211-215.
    • (1992) Dent Mater , vol.8 , pp. 211-215
    • Schneider, W.1    Powers, J.M.2    Pierpont, H.P.3
  • 15
    • 0028367188 scopus 로고
    • Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy
    • Kern M, Thompson VP. Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy. Dent Mater 1994;9:19-25.
    • (1994) Dent Mater , vol.9 , pp. 19-25
    • Kern, M.1    Thompson, V.P.2
  • 16
    • 0031201534 scopus 로고    scopus 로고
    • Bond strengths of resin-to-metal bonding systems
    • Kourtis SG. Bond strengths of resin-to-metal bonding systems. J Prosthet Dent 1997;78:136-145.
    • (1997) J Prosthet Dent , vol.78 , pp. 136-145
    • Kourtis, S.G.1
  • 17
    • 0033210779 scopus 로고    scopus 로고
    • Effect of sandblasting and silicoating on bond strength of polymer-glass composite to cast titanium
    • Watanabe I, Kurtz KS, Kabcenell JK, Okabe T. Effect of sandblasting and silicoating on bond strength of polymer-glass composite to cast titanium. J Prosthet Dent 1999;82:462-467.
    • (1999) J Prosthet Dent , vol.82 , pp. 462-467
    • Watanabe, I.1    Kurtz, K.S.2    Kabcenell, J.K.3    Okabe, T.4
  • 18
    • 0033226954 scopus 로고    scopus 로고
    • Shear bond strength of techniques for bonding esthetic veneers to metal
    • Petridis H, Hirayama H, Kugel G, Habib C, Garefis P. Shear bond strength of techniques for bonding esthetic veneers to metal. J Prosthet Dent 1999;82:608-614.
    • (1999) J Prosthet Dent , vol.82 , pp. 608-614
    • Petridis, H.1    Hirayama, H.2    Kugel, G.3    Habib, C.4    Garefis, P.5
  • 19
    • 0036512555 scopus 로고    scopus 로고
    • Probability of failure of highly filled indirect resin-veneered implant-supported restorations: An in vitro study
    • Takahashi Y, Hisama K, Sato H, et al. Probability of failure of highly filled indirect resin-veneered implant-supported restorations: An in vitro study. Int J Prosthodont 2002;15:179-182.
    • (2002) Int J Prosthodont , vol.15 , pp. 179-182
    • Takahashi, Y.1    Hisama, K.2    Sato, H.3
  • 20
    • 0030179902 scopus 로고    scopus 로고
    • A comparison of two methods of adhering composite to metal
    • Magneville B, Dejou J. A comparison of two methods of adhering composite to metal. J Prosthet Dent 1996;76:97-101.
    • (1996) J Prosthet Dent , vol.76 , pp. 97-101
    • Magneville, B.1    Dejou, J.2
  • 21
    • 0036598684 scopus 로고    scopus 로고
    • Investigation of microleakage at the interface between a Co-Cr based alloy and four polymeric veneering materials
    • Rominu M, Lakatos S, Florita Z, Negrutiu M. Investigation of microleakage at the interface between a Co-Cr based alloy and four polymeric veneering materials. J Prosthet Dent 2002;87:620-624.
    • (2002) J Prosthet Dent , vol.87 , pp. 620-624
    • Rominu, M.1    Lakatos, S.2    Florita, Z.3    Negrutiu, M.4
  • 22
    • 0021403252 scopus 로고
    • Long-term clinical study of porcelain-fused-to-gold restorations
    • Coonaert J, Adriaens P, De Boever J. Long-term clinical study of porcelain-fused-to-gold restorations. J Prosthet Dent 1984;51: 338-342.
    • (1984) J Prosthet Dent , vol.51 , pp. 338-342
    • Coonaert, J.1    Adriaens, P.2    De Boever, J.3
  • 23
    • 0021768385 scopus 로고
    • Failures in full crown retained dental bridges
    • Reuter JE, Brose MO. Failures in full crown retained dental bridges. Br Dent J 1984;157:61-63.
    • (1984) Br Dent J , vol.157 , pp. 61-63
    • Reuter, J.E.1    Brose, M.O.2
  • 24
    • 0033070380 scopus 로고    scopus 로고
    • Six-year follow-up of titanium and high-gold porcelain-fused-to-metal fixed partial dentures
    • Walter M, Reppel P-D, Böning K, Freesmeyer WB. Six-year follow-up of titanium and high-gold porcelain-fused-to-metal fixed partial dentures. J Oral Rehabil 1999;26:91-96.
    • (1999) J Oral Rehabil , vol.26 , pp. 91-96
    • Walter, M.1    Reppel, P.-D.2    Böning, K.3    Freesmeyer, W.B.4
  • 25
    • 0021982408 scopus 로고
    • Comparison of four thermocycling techniques
    • Crim GA. Comparison of four thermocycling techniques. J Prosthet Dent 1985;53:50-53.
    • (1985) J Prosthet Dent , vol.53 , pp. 50-53
    • Crim, G.A.1
  • 26
    • 0023339638 scopus 로고
    • Microleakage: The effect of storage and cycling duration
    • Crim GA, Garcia-Godoy F. Microleakage: The effect of storage and cycling duration. J Prosthet Dent 1987;57:574-576.
    • (1987) J Prosthet Dent , vol.57 , pp. 574-576
    • Crim, G.A.1    Garcia-Godoy, F.2
  • 27
    • 0018996246 scopus 로고
    • Comparative evaluation of ceramic-metal bond tests using finite element stress analysis
    • Anusavice KJ, Dehoff PH, Fairhurst CW. Comparative evaluation of ceramic-metal bond tests using finite element stress analysis. J Dent Res 1980;59:608-613.
    • (1980) J Dent Res , vol.59 , pp. 608-613
    • Anusavice, K.J.1    Dehoff, P.H.2    Fairhurst, C.W.3
  • 28
    • 0039829365 scopus 로고
    • Mechanical properties
    • St Louis: Mosby
    • Craig RG. Mechanical properties. In: Restorative Dental Materials. St Louis: Mosby, 1993:54-105.
    • (1993) Restorative Dental Materials , pp. 54-105
    • Craig, R.G.1
  • 29
    • 84987368505 scopus 로고
    • Degradation of plasma-sprayed alumina on metal substrates in physiological media
    • Drummond JL, Simon MR, Brown SD, Blattner RJ. Degradation of plasma-sprayed alumina on metal substrates in physiological media. J Am Ceram Soc 1981;64:C109-C110.
    • (1981) J Am Ceram Soc , vol.64
    • Drummond, J.L.1    Simon, M.R.2    Brown, S.D.3    Blattner, R.J.4
  • 31
    • 0026458869 scopus 로고
    • The effect of corrosive environment on the porcelain-to-metal bond - A fracture mechanics investigation
    • Herrman M, Rottenegger R, Tinschert J, Marx R. The effect of corrosive environment on the porcelain-to-metal bond - A fracture mechanics investigation. Dent Mater 1992;8:2-6.
    • (1992) Dent Mater , vol.8 , pp. 2-6
    • Herrman, M.1    Rottenegger, R.2    Tinschert, J.3    Marx, R.4
  • 32
    • 0032608630 scopus 로고    scopus 로고
    • Water resistance of resin-bonded joints with time related to alloy surface treatment
    • Moulin P, Picard B, Degrange M. Water resistance of resin-bonded joints with time related to alloy surface treatment. J Dent 1999;27:79-87.
    • (1999) J Dent , vol.27 , pp. 79-87
    • Moulin, P.1    Picard, B.2    Degrange, M.3
  • 33
    • 0035458349 scopus 로고    scopus 로고
    • Shear bond strength of resin composite veneering material to gold alloy with varying metal surface treatments
    • Matsumura H, Yanagida H, Tanoue N, Atsuta M, Shimoe S. Shear bond strength of resin composite veneering material to gold alloy with varying metal surface treatments. J Prosthet Dent 2001;86:315-319.
    • (2001) J Prosthet Dent , vol.86 , pp. 315-319
    • Matsumura, H.1    Yanagida, H.2    Tanoue, N.3    Atsuta, M.4    Shimoe, S.5
  • 35
    • 0024102530 scopus 로고
    • Tensile bond strength of Comspan resin to six differently treated metal surfaces
    • Veen JH, Bronsdjik AE, Slagter AP, Poel ACM, Arends J. Tensile bond strength of Comspan resin to six differently treated metal surfaces. Dent Mater 1988;4:272-277.
    • (1988) Dent Mater , vol.4 , pp. 272-277
    • Veen, J.H.1    Bronsdjik, A.E.2    Slagter, A.P.3    Poel, A.C.M.4    Arends, J.5


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.