Review of vibration-assisted machining

Precision Engineering

Volumn 32, Issue 3, 2008, Pages 153-172

  Brehl, D E ^a   Dow, T A ^a  

^a NORTH CAROLINA STATE UNIVERSITY   (United States)

Author keywords

Ultrasonic vibration machining; Vibration cutting; Vibration assisted machining

Indexed keywords

BRITTLENESS; DRILLING; GRINDING (MACHINING); MICROSTRUCTURE; TURNING; VIBRATION CONTROL;

DIAMOND TOOLS; FERROUS MATERIALS; HARD ALLOYS; ULTRASONIC VIBRATION MACHINING; VIBRATION CUTTING;

PRECISION ENGINEERING;

EID: 42949118272     PISSN: 01416359     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.precisioneng.2007.08.003     Document Type: Review

References (70)

1. Ahn J.H., Lim H.S., and Son S.M. Improvement of micromachining accuracy by 2Dimensional vibration cutting. Proc ASPE 20 (1999) 150-153
2. Arcona C. Tool force, chip formation and surface finish in diamond turning. PhD dissertation. North Carolina State University; 1996.
3. Astashev V.K., and Babitsky V.I. Ultrasonic cutting as a nonlinear (vibro-impact) process. Ultrasonics 36 (1998) 89-96
4. Astashev V.K. Effect of ultrasonic vibration of a single-point tool on the process of cutting. J Mach Manuf Reliabil 3 (1992) 65-70
5. Babitsky V.I., Astashev V.K., and Kalashnikov A.N. Autoresonant control of non-linear mode in ultrasonic transducer for machining applications. Ultrasonics 42 (2004) 29-35
6. Babitsky V.I., Kalashnikov A.N., and Molodtsov F.V. Autoresonant control of ultrasonically-assisted cutting. Mechatronics 14 (2004) 91-114
7. Babitsky V.I., Mitrofanov A.V., and Silberschmidt V.V. Ultrasonically-assisted turning of aviation materials: simulations and experimental Study. Ultrasonics 42 (2004) 81-86
8. Brehl D.E., Dow T.A., Garrard K., and Sohn A. Microstructure fabrication using elliptical vibration-assisted machining. Proc ASPE 39 (2006) 511-514
9. In: Brehl D.E., and Dow T.A. (Eds). Vibration assisted machining technology. Proc ASPE 40 (2007)
10. Brinksmeier E., and Glabe R. Elliptical vibration cutting of steel with diamond tools. Proc ASPE 20 (1999) 163-166
11. Brocato BC. Micromachining using elliptical vibration-assisted machining. MS thesis. North Carolina State University; 2005.
12. Cerniway MA. Elliptical diamond milling: kinematics, force, and tool wear. MS thesis. North Carolina State University; 2001.
13. Dautzenberg J., Hijink J., and Van der Wolf A. The minimum energy principal applied to the cutting process of various workpiece materials and tool rake angles. CIRP Ann 31 (1982) 91-96
14. Dambon O., Klocke F., Heselhaus M., Bulla B., Weber A., Schug R., et al. Vibration-assisted machining research at Fraunhofer IPT-diamond turning and precision grinding. Proc ASPE 40 (2007) 3-9
15. Gan J., Wang X., Zhou M., Ngoi B., and Zhong Z. Ultraprecision diamond turning of glass with ultrasonic vibration. Int J Adv Manuf Technol 21 (2003) 952-955
16. Gao G.F., Zhao B., Jiao F., and Liu C.S. Research on the influence of the cutting conditions on the surface microstructure of ultra-thin wall parts in ultrasonic vibration cutting. J Mater Process Technol 129 (2002) 66-70
17. Han L., Xu W.L., and Tso S.K. Ultrasonically assisted and piezoelectric actuators integrated cutting tool. Jpn J Appl Phys 37 (1998) 4616-4619
18. Isaev A., and Anokhin V. Ultrasonic vibration of a metal cutting tool. Vest Mashinos 41 (1961) (in Russian)
19. Japitana F., Morishige K., and Takeuchi Y. Highly efficient manufacture of groove with sharp corner on adjoining surfaces by 6-axis control ultrasonic vibration cutting. Precision Eng 29 (2005) 431-439
20. Jin M., and Murakawa M. Development of a practical ultrasonic vibration cutting tool system. J Mater Process Technol 113 (2001) 342-347
21. Kazuo N., Minoru A., and Torohiro K. Machining characteristics of hard metals. CIRP Ann 37 (1988) 89-92
22. Kim J.D., and Choi I.H. Micro surface phenomena of ductile cutting in the ultrasonic vibration cutting of optical plastics. J Mater Process Technol 68 (1997) 89-98
23. Kim J.D., and Lee E.S. A study of the ultrasonic cutting of carbon-fiber reinforced plastics. J Mater Process Technol 43 (1994) 259-277
24. Kim J.D., and Choi I.H. Characteristics of chip generation by ultrasonic vibration cutting with extremely low cutting velocity. Int J Adv Manuf Technol 14 (1998) 2-6
25. Klocke F., Demmer A., and Heselhaus M. Material removal mechanisms in ultrasonic-assisted diamond turning of brittle materials. Int J Mater Product Technol 20 (2004) 231-238
26. Klocke F., and Kratz H. Advanced tool-edge geometry for high-precision hard turning. CIRP Ann 54-1 (2005) 47-50
27. Klocke F., and Rubenach O. Ultrasonic-assisted diamond turning of glass and steel. Ind Diamond Rev (2000) 229-239
28. Kumbabe J. Vibratory Cutting (1979), Jikkyou Publishing Co., Tokyo (in Japanese)
29. Lee J.S., Lee D.W., Jung Y.H., and Chung W.S. A study on micro-grooving characteristics of planar lightwave circuit and glass using ultrasonic vibration cutting. J Mater Process Technol 130-131 (2000) 396-400
30. Li X., and Zhang D. Ultrasonic-elliptical vibration transducer driven by single actuator and its application in precision cutting. J Mater Process Technol 180 (2006) 91-95
31. Liu C.S., Zhao B., Gao G.F., and Jiao F. Research on the characteristics of the cutting force in the vibration cutting of a particle-reinforced metal matrix composite SiCp/Al. J Mater Process Technol 129 (2002) 196-199
32. Liu K., Li X.P., Rahman M., and Liu X.D. Study of ductile mode cutting in grooving of tungsten carbide with and without ultrasonic vibration assistance. Int J Adv Manuf Technol 24 (2004) 389-394
33. Ma C., Shamoto E., Moriwaki T., Zhang Y., and Wang L. Suppression of burrs in turning with ultrasonic elliptical vibration cutting. Int J Mach Tools Manuf 45-11 (2005) 1295-1300
34. Ma C., Shamato E., Moriwaki T., and Wang L. Study of machining accuracy in ultrasonic elliptical vibration cutting. Int J Mach Tools Manuf 44 (2004) 1305-1310
35. Ma C., Shamoto E., and Moriwaki T. Study on the thrust cutting force in elliptical vibration cutting. Mater Sci Forum 471-472 (2004) 396-400
36. Ma C.X., Shamoto E., and Moriwaki T. Drilling assisted by ultrasonic elliptical vibration. Key Eng Mater 291-292 (2005) 443-446
37. Mitrofanov A.N., Ahmed N., Babitsky V.I., and Silberschmidt V.V. Effect of lubrication and cutting parameters on ultrasonically-assisted turning of inconel 718. J Mater Process Technol 162-163 (2005) 649-654
38. Mitrofanov A.V., Babitsky V.I., and Silberschmidt V.V. Finite element simulations of ultrasonically assisted turning. Comput Mater Sci 28 (2003) 646-653
39. Mitrofanov A.V., Babitsky V.I., and Silberschmidt V.V. Thermomechanical finite element simulations of ultrasonically assisted turning. Comput Mater Sci 32 (2005) 463-471
40. Mitrofanov A.V., Babitsky V.I., and Silberschmidt V.V. Finite-element analysis of ultrasonically-assisted turning of inconel 718. J Mater Process Technol 153-154 (2004) 233-239
41. Moriwaki T., and Shamoto E. Ultrasonic elliptical vibration cutting. CIRP Ann 44 (1995) 31-34
42. Moriwaki T., Shamoto E., and Inoue K. Ultraprecision ductile cutting of glass by applying ultrasonic vibration. CIRP Ann (1992) 41
43. Moriwaki T., and Shamoto E. Ultraprecision turning of stainless steel by applying ultrasonic vibration. CIRP Ann 40 (1991) 559-562
44. Negishi N. Elliptical vibration-assisted machining with single crystal diamond tools. MS thesis. North Carolina State University; 2003.
45. Overcash J., and Cuttino J. Development of a tunable ultrasonic vibration-assisted diamond turning instrument. Proc ASPE 30 (2003) 503-507
46. Paul E., Evans C., Mangamelli A., McGlauflin M., and Polvani R. Chemical aspects of tool wear in single-point diamond turning. Precision Eng 18 (1996) 4-19
47. Rubenach O. From process innovation to product innovation-ultrasonic-assisted diamond turning of optical glass. Ind Diamond Rev (2003) 41-47
48. Scattergood R.O., and Blackley W.S. Ductile-regime machining model for diamond turning of brittle materials. Precision Eng 13 (1991) 95-103
49. Shamoto E., and Moriwaki T. Study on elliptical vibration cutting. CIRP Ann 43 (1994) 35-38
50. Shamoto E., and Moriwaki T. Ultraprecision diamond cutting of hardened steel by applying elliptical vibration cutting. CIRP Ann 48 (1999) 441-444
51. Shamoto E., Suzuki N., and Hino R. Simulation of elliptical vibration cutting process with thin shear plane model. Proc ASPE 40 (2007) 64-69
52. Shamoto E., Suzuki N., and Naoi Y. Development of ultrasonic elliptical vibration controller for elliptical vibration cutting. CIRP Ann 51 (2002) 327-330
53. Shamoto E., Suzuki N., Tsuchiya E., Hori Y., Inagaki H., and Yoshino K. Development of 3-DOF ultrasonic vibration tool for elliptical vibration cutting of sculptured surfaces. CIRP Ann 54 (2005) 321-324
54. Shamato E. Ultraprecision micromachining of hardened die steel by applying elliptical vibration cutting. JSME News 16 (2005) 1-4
55. Shamoto E., Ma C.X., and Moriwaki T. Elliptical vibration cutting -3rd report, application to three dimensional cutting and investigation of practical effects. J JSPE 65 (1999) 586-591
56. Shamoto E., Morimoto Y., and Moriwaki T. Elliptical vibration cutting -1st report, cutting principle and basic performance. J JSPE 62 (1996) 1127-1131
57. Shamoto E., Morimoto Y., and Moriwaki T. Elliptical vibration cutting -2nd report, study on effects of vibration conditions. J JSPE 65 (1999) 411-417
58. Shimada S., Tanaka H., Higuchi M., Yamaguchi T., Honda S., and Obata K. Thermochemical wear mechanisms in machining of ferrous metals. CIRP Ann 53 (2004) 57-60
59. Skelton R.C. Turning with an oscillating tool. Int J Mach Tool Des Res 8 (1968) 239-259
60. Sugawara K. Study on elliptical vibration cutting and its applications. MS thesis. Kobe University; 1999.
61. Suzuki N., Hino R., and Shamoto E. Development of 3-DOF ultrasonic elliptical vibration system for elliptical vibration cutting. Proc ASPE 40 (2007) 15-20
62. Suzuki N., Masuda S., Haritani M., and Shamato E. Ultraprecision micromachining of brittle materials by applying ultrasonic elliptical vibration cutting. Proceedings: Int. Symposium on Micro-NanoMechatronics and Human Science. Nagoya University (2004) 133-138
63. Suzuki N., Nakamura A., Shamoto E., Harada K., Matsuo M., and Osada M. Ultraprecision micromachining of hardened steel by applying ultrasonic elliptical vibration cutting. IEEE Int Sym Micromechatronics Human Sci (2003) 221-226
64. Weber H., Herberger J., and Pilz R. Turning of machinable glass ceramics with an ultrasonically vibrated tool. CIRP Ann 33 (1984) 85-87
65. Xiao M., Karube S., Soutome T., and Sato L. Analysis of Chatter Suppression in Vibration Cutting. Int J Mach Tools Manuf 42 (2002) 1677-1685
66. Xiao M., Sato K., Karube S., and Soutome T. The effect of tool nose radius in ultrasonic vibration cutting of hard metal. Int J Mach Tools Manuf 43 (2003) 1375-1382
67. Xu W.L., and Han L. Piezoelectric actuator-based active error compensation of precision machining. Meas Sci Technol 10 (1999) 106-111
68. Zhong Z.W., and Lin G. Diamond turning of a metal matrix composite with ultrasonic vibrations. Mater Manuf Process 20 (2005) 727-735
69. Zhou M., Eow Y., Ngoi B., and Lim E. Vibration-assisted precision machining of steel with PCD tools. Mater Manuf Process 18 (2003) 825-834
70. Zhou M., Wang X.J., Ngoi B., and Gan J. Brittle-ductile transition in the diamond cutting of glasses with the aid of ultrasonic vibration. J Mater Process Technol 121 (2002) 243-251