Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC)

International Journal of Hydrogen Energy

Volumn 33, Issue 9, 2008, Pages 2337-2354

  Ni, Meng ^a   Leung, Michael K H ^a   Leung, Dennis Y C ^a  

^a UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Electrochemistry; Literature review; Material development; Mathematical modeling; Solid oxide steam electrolysis

Indexed keywords

DEPOLARIZATION; ELECTRODES; ELECTROLYSIS; IONIC CONDUCTION; MATHEMATICAL MODELS; SOLID OXIDE FUEL CELLS (SOFC);

INTERMEDIATE-TEMPERATURE; LITERATURE REVIEW; MATERIAL DEVELOPMENT; SOLID-OXIDE STEAM ELECTROLYSIS;

HYDROGEN PRODUCTION;

EID: 42749087533     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2008.02.048     Document Type: Review

References (138)

1. Ni M., Leung M.K.H., Sumathy K., and Leung D.Y.C. Potential of renewable hydrogen production for energy supply in Hong Kong. Int J Hydrogen Energy 31 10 (2006) 1401-1412
2. 2 for hydrogen production. Renewable Sustainable Energy Rev 11 3 (2007) 401-425
3. Rund JA. System design and new materials for reversible solid-oxide high temperature steam electrolysis, US DOE Hydrogen Program, FY Progress Report 2005. p. 361-2.
4. Balachov II, Crouch-Baker S, Hornbostel M, McKubre M, Sanjurjo A, Tanzella F. Modular system for hydrogen generation and oxygen recovery, US DOE Hydrogen Program, FY Progress report 2005. p. 363-6.
5. Hartvigsen J, Swank D, Schade C, Bordia R. Large area cell for hybrid hydrogen co-generation process, US DOE Hydrogen Program, FY Progress report 2005. p. 367-9.
6. Yildiz B., and Kazimi M.S. Efficiency of hydrogen production systems using alternative nuclear energy technologies. Int J Hydrogen Energy 31 1 (2006) 77-92
7. Sigurvinsson J., Mansilla C., Lovera P., and Werkoff F. Can high temperature steam electrolysis function with geothermal heat?. Int J Hydrogen Energy 32 9 (2007) 1174-1182
8. Wendt H. Electrochemical hydrogen technologies: electrochemical production and combustion of hydrogen (1990), Elsevier Science Publishers B.V., New York, USA p. 345.
9. Fergus J.W. Metallic interconnects for solid oxide fuel cells. Mater Sci Eng A-Structural Materials Properties Microstructure and Processing 397 1-2 (2005) 271-283
10. Zhu W.Z., and Deevi S.C. Development of interconnect materials for solid oxide fuel cells. Mater Sci Eng A-Structural Materials Properties Microstructure and Processing 348 1-2 (2003) 227-243
11. 2. J Am Ceram Soc 47 3 (1964) 122-127
12. Prabhakaran K., Beigh M.O., Lakra J., Gokhale N.M., and Sharma S.C. Characteristics of 8 mol% yttria stabilized zirconia powder prepared by spray drying process. J Mater Process Technol 189 1-3 (2007) 178-181
13. 2 films deposited with aerosol-assisted MOCVD. Solid State Ionics 177 39-40 (2007) 3405-3410
14. Brahim C., Ringuede A., Cassir M., Putkonen M., and Niinisto L. Electrical properties of thin yttria-stabilized zirconia overlayers produced by atomic layer deposition for solid oxide fuel cell applications. Appl Surf Sci 253 (2007) 3962-3968
15. Ivanov V.V., Lipilin A.S., Kotov Y.A., Khrustov V.R., Shkerin S.N., Pararnin S.N., et al. Formation of a thin-layer electrolyte for SOFC by magnetic pulse compaction of tapes cast of nanopowders. J Power Sources 159 1 (2006) 605-612
16. Dahl P., Kaus I., Zhao Z., Johnsson M., Nygren M., Wiik K., et al. Densification and properties of zirconia prepared by three different sintering techniques. Ceramics Int 33 8 (2007) 1603-1610
17. Etsell T.H., and Flengas S.N. Electrical properties of solid oxide electrolytes. Chem Rev 70 3 (1970) 339-376
18. 2: MgO and blocking effects. J Eur Ceram Soc 15 1 (1995) 51-55
19. Badwal S.P.S., Ciacchi F.T., and Milosevic D. Scandia-zirconia electrolytes for intermediate temperature solid oxide fuel cell operation. Solid State Ionics 136-137 (2000) 91-99
20. 3-doped zirconia ceramics improved by postsintering with HIP. Solid State Ionics 133 1-2 (2000) 1-9
21. Kilner J.A., and Brook R.J. A study of oxygen ion conductivity in doped non-stoichiometric oxides. Solid State Ionics 6 3 (1982) 237-252
22. Singhal S.C., and Kendall K. High temperature solid oxide fuel cells: fundamentals, design, and applications (2003), Elsevier Science Publishers B.V., New York, USA
23. 3 (Ln=lanthanides) system. Solid State Ionics 121 1-4 (1999) 133-139
24. 2-based ceramic materials. J Solid State Electrochem 3 2 (1999) 61-81
25. Gibson I.R., Dransfield G.P., and Irvine J.T.S. Influence of yttria concentration upon electrical properties and susceptibility to ageing of yttria-stabilised zirconias. J Eur Ceram Soc 18 6 (1998) 661-667
26. Yamamoto O., Arati Y., Takeda Y., Imanishi N., Mizutani Y., Kawai M., et al. Electrical conductivity of stabilized zirconia with ytterbia and Scandia. Solid State Ionics 79 (1995) 137-142
27. Haering C., Roosen A., Schichl H., and Schnoller M. Degradation of the electrical conductivity in stabilized zirconia system part II: Scandia-stabilized zirconia. Solid State Ionics 176 3-4 (2005) 261-268
28. Guo X., and Waser R. Electrical properties of the grain boundaries of oxygen ion conductors: acceptor-doped zirconia and ceria. Progr Mater Sci 51 2 (2006) 151-210
29. Kosacki I., Rouleau C.M., Becher P.F., Bentley J., and Lowndes D.H. Nanoscale effects on the ionic conductivity in highly textured YSZ thin film. Solid State Ionics 176 13-14 (2005) 1319-1326
30. Kosacki I., Anderson H.U., Mizutani Y., and Ukai K. Nonstoichiometry and electrical transport in Sc-doped zirconia. Solid State Ionics 152-153 (2002) 431-438
31. Liu Y., and Lao L.E. Structural and electrical properties of ZnO-doped 8 mol% yttria-stabilized zirconia. Solid State Ionics 177 1-2 (2006) 159-163
32. Kumar B., Chen C., Varanasi C., and Fellner J.P. Electrical properties of heterogeneously doped yttria stabilized zirconia. J Power Sources 140 1 (2005) 12-20
33. Sarat S., Sammes N., and Smirnova A. Bismuth oxide doped scania-stabilized zirconia electrolyte for the intermediate temperature solid oxide fuel cells. J Power Sources 162 2 (2006) 892-896
34. 3 perovskite type oxide as a new oxide ionic conductor. J Am Chem Soc 16 9 (1994) 3801-3803
35. Stevenson J.W., Armstrong T.R., Pederson L.R., Li J., Lewinsohn C.A., and Baskaran S. Effect of A-site cation nonstoichiometry on the properties of doped lanthanum gallate. Solid State Ionics 113-115 (1998) 571-583
36. 3 electrolyte: the role of a rare-earth oxide buffer. J Alloys Compd 303-304 (2000) 454-464
37. Zhang X.G., Ohara S., Maric R., Okawa H., Fukui T., Yoshida H., et al. Interface reactions in the NiO-SDC-LSGM system. Solid State Ionics 133 3-4 (2000) 153-160
38. 3 - δ by glycine-nitrate combustion method. J Alloys Compd 348 1-2 (2003) 325-331
39. 2.815. Mater Lett 57 12 (2003) 1792-1797
40. 3 perovskites. J Eur Ceram Soc 24 6 (2004) 1365-1370
41. 2.85 materials for SOFC application by acrylamide polymerisation. Mater Res Bull 41 3 (2006) 461-468
42. 3 - a. J Eur Ceram Soc 21 13 (2001) 2311-2317
43. 3 by using glycine-nitrate combustion method. J Alloys Compd 425 1-2 (2006) 348-352
44. 3 system. Mater Res Bull 39 1 (2004) 141-155
45. 3 - δ electrolyte: effects of ceramic microstructure. Electrochim Acta 48 13 (2003) 1817-1828
46. 3 - δ. J Electrochem Soc 144 9 (1997) 3130-3135
47. 3-delta. J Electrochem Soc 147 9 (2000) 3213-3218
48. Khorkounov B.A., Nafe H., and Aldinger F. Relationship between the ionic and electronic partial conductivities of co-doped LSGM ceramics from oxygen partial pressure dependence of the total conductivity. J Solid State Electrochem 10 7 (2006) 479-487
49. 3-delta (M = Fe, Co, Ni). Mater Chem Phys 82 3 (2003) 684-690
50. 2 interlayer. Acta Phys-Chim Sinica 9 (2003) 849-853
51. Van herle J., Horita T., Kawada T., Sakai N., Yokokawa H., and Dokiya M. Low temperature fabrication of (Y,Gd,Sm)-doped ceria electrolyte. Solid State Ionics 86-88 2 (1996) 1255-1258
52. Im J.M., You H.J., Yoon Y.S., and Shin D.W. Synthesis of nano-sized gadolinia doped ceria powder by aerosol flame deposition. J Eur Ceram Soc 27 13-15 (2007) 3671-3675
53. Chinarro E., Jurado J.R., and Colomer M.T. Synthesis of ceria-based electrolyte nanometric powders by urea-combustion technique. J Eur Ceram Soc 27 13-15 (2007) 3619-3623
54. Hui S.Q., Yang D.F., Wang Z.W., Yick S., Deces-Petit C., Qu W., et al. Metal-supported solid oxide fuel cell operated at 400-600 °C. J Power Sources 167 2 (2007) 336-339
55. 2-intermediate temperature oxide ion electrolytes. J Power Sources 168 1 (2007) 178-183
56. Zhang T.S., Ma J., Cheng H., and Chan S.H. Ionic conductivity of high-purity Gd-doped ceria solid solutions. Mater Res Bull 41 3 (2006) 563-568
57. 2 - x / 2 solid solution prepared by flame spray pyrolysis. Mater Res Bull 41 2 (2006) 359-366
58. 2 - δ solid solutions. Solid State Sci 4 5 (2002) 585-590
59. 2 - x / 2 solid solutions. Chem Mater 9 10 (1997) 2240-2245
60. 1.9 powders prepared by citric acid-nitrate low-temperature combustion process. J Power Sources 163 1 (2006) 409-414
61. Zha S.W., Xia C.R., and Meng G.Y. Effect of Gd (Sm) doping on properties of ceria electrolyte for solid oxide fuel cells. J Power Sources 115 1 (2003) 44-48
62. Zhang T.S., Ma J., Kong L.B., Chan S.H., and Kilner J.A. Aging behavior and ionic conductivity of ceria-based ceramics: a comparative study. Solid State Ionics 170 3-4 (2004) 209-217
63. 3 system (0.05 ≤ Gd / Ce ≤ 0.4) prepared by oxalate co-precipitation. Solid State Ionics 148 3-4 (2002) 567-573
64. 2 ceramics. Sci Technol Adv Mater 4 3 (2003) 229-238
65. 1.9 membranes on porous substrates by a slurry spin coating method and its application in IT-SOFC. J Membrane Sci 286 1-2 (2006) 255-259
66. 2 - δ ceramics. Electrochim Acta 52 5 (2007) 2001-2008
67. Sha X.Q., Lu Z., Huang X.Q., Miao J.P., Ding Z.H., Xin X.S., et al. Study on La and Y co-doped ceria-based electrolyte materials. J Alloys Compd 428 1-2 (2007) 59-64
68. 2-based systems. Solid State Ionics 154-155 (2002) 461-466
69. 3 + co-doped ceria-based electrolytes. J Solid State Electrochem 9 3 (2005) 168-173
70. Mogensen M., Sammes N.M., and Tompsett G.A. Physical, chemical and electrochemical properties of pure and doped ceria. Solid State Ionics 129 1-4 (2000) 63-94
71. Kharton V.V., Marques F.M.B., and Atkinson A. Transport properties of solid oxide electrolyte ceramics: a brief review. Solid State Ionics 174 1-4 (2004) 135-149
72. 2 - y / 2 electrolytes for IT-SOFC operation at 500 °C. Solid State Ionics 129 1-4 (2000) 95-110
73. Virkar A.V. Theoretical analysis of solid oxide fuel cells with 2-layer composite electrolytes-electrolyte stability. J Electrochem Soc 138 5 (1991) 1481-1487
74. Marques F.M.B., and Navarro L.M. Performance of double layer electrolyte cells part I: model behavior. Solid State Ionics 90 1-4 (1996) 183-192
75. Marques F.M.B., and Navarro L.M. Performance of double layer electrolyte cells part II: GCO/YSZ, a case study. Solid State Ionics 100 1-2 (1997) 29-38
76. Mehta K., Xu R., and Virkar A.V. Two-layer fuel cell electrolyte structure by sol-gel processing. J Sol-Gel Sci Technol 11 2 (1998) 203-207
77. Kim S.G., Yoon S.P., Nam S.W., Hyun S.H., and Hong S.A. Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol-gel coating method. J Power Sources 110 1 (2002) 222-228
78. Bi Z.H., Yi B.L., Wang Z.W., Dong Y.L., Wu H.J., She Y.C., et al. A high-performance anode-supported SOFC with LDC-LSGM bilayer electrolytes. Electrochem Solid State Lett 7 5 (2004) A105-A107
79. 3. Solid State Ionics 89 3-4 (1996) 179-196
80. Sammes N.M., Tompsett G.A., Nafe H., and Aldinger F. Bismuth based oxide electrolytes-structure and ionic conductivity. J Eur Ceram Soc 19 10 (1999) 1801-1826
81. 2 solid solution oxide-ion electrolyte. Solid State Ionics 89 1-2 (1996) 17-24
82. Sarat S., Sammes N., and Smirnova A. Bismuth oxide doped Scandia-stabilized zirconia electrolyte for the intermediate temperature solid oxide fuel cells. J Power Sources 160 2 (2006) 892-896
83. 5.35 films. Appl Surf Sci 253 5 (2006) 2702-2707
84. Kreuer K.D. Proton-conducting oxides. Annu Rev Mater Res 33 (2003) 333-359
85. 3 (M=La, Nd, Ho). Solid State Ionics 13 4 (1984) 285-292
86. Bonanos N., Ellis B., Knight K.S., and Mahmood M.N. Ionic conductivity of gadolinium-doped barium cerate perovskites. Solid State Ionics 35 1-2 (1989) 179-188
87. Taniguchi N., Hatoh K., Niikura J., Gamo T., and Iwahara H. Proton conductive properties of gadolinium-doped barium cerates at high temperatures. Solid State Ionics 53-56 (1992) 998-1003
88. 3 - x (= 0, 0.02, 0.05, 0.10 and 0.15). Solid State Ionics 86-88 1 (1996) 679-683
89. 3 and the ionic conduction. Solid State Ionics 120 1-4 (1999) 51-60
90. 3 electrolyte thin film. Solid State Ionics 177 3-4 (2006) 389-393
91. 3 and its application to an air/fuel sensor. J Mater Sci 39 7 (2004) 2493-2497
92. Su X.T., Yan Q.Z., Ma X.H., Zhang W.F., and Ge C.C. Effect of co-dopant addition on the properties of yttrium and neodymium doped barium cerate electrolyte. Solid State Ionics 177 11-12 (2006) 1041-1045
93. 3 ceramic electrolytes. J Power Sources 134 2 (2004) 153-159
94. 3 single crystal. Solid State Ionics 97 1-4 (1997) 421-427
95. Doenitz W., Schmidberger R., Steinheil E., and Streicher R. Hydrogen production by high temperature electrolysis of water vapour. Int J Hydrogen Energy 5 1 (1980) 55-63
96. 3-based proton conductive solid electrolyte. Int J Hydrogen Energy 12 2 (1987) 73-77
97. Jiang S.P., and Chan S.H. A review of anode materials development in solid oxide fuel cells. J Mater Sci 39 (2004) 4405-4439
98. Martinez-Frias J., Pham A., and Aceves S.M. A natural gas-assisted steam electrolyzer for high-efficiency production of hydrogen. Int J Hydrogen Energy 28 5 (2003) 483-490
99. Hong H.S., Chae U.S., Choo S.T., and Lee K.S. Microstructure and electrical conductivity of Ni/YSZ and NiO/YSZ composites for high-temperature electrolysis prepared by mechanical alloying. J Power Sources 149 (2005) 84-89
100. Hong H.S., Chae U.S., and Choo S.T. The effect of ball milling parameters and Ni concentration on a YSZ-coated Ni composite for a high temperature electrolysis cathode. J Alloys Compd 449 1-2 (2008) 331-334
101. Eguchi K., Hatagishi T., and Arai H. Power generation and steam electrolysis characteristics of an electrochemical cell with a zirconia- or ceria-based electrolyte. Solid State Ionics 86-88 (1996) 1245-1249
102. O'Brien J.E., Stoots C.M., Herring J.S., Lessing P.A., Hartvigsen J.J., and Elangovan S. Performance measurements of solid oxide electrolysis cells for hydrogen production. J Fuel Cell Sci Technol 2 3 (2005) 156-163
103. Momma A., Kaga Y., Takano K., Nozaki K., Negishi A., Kato K., et al. Experimental investigation of anodic gaseous concentration of a practical seal-less solid oxide fuel cell. J Power Sources 145 2 (2005) 169-177
104. Maskalick N.J. High temperature electrolysis cell performance characterization. Int J Hydrogen Energy 11 9 (1986) 563-570
105. Doenitz W., and Schmidberger R. Concepts and design for scaling up high temperature water vapor electrolysis. Int J Hydrogen Energy 7 4 (1982) 321-330
106. Isenberg A.O. Energy conversion via solid oxide electrolyte electrochemical cells at high temperature. Solid State Ionics 3-4 (1981) 431-437
107. Hauch A., Jensen S.H., Ramousse S., and Mogensen M. Performance and durability of solid oxide electrolysis cells. J Electrochem Soc 153 9 (2006) A1741-A1747
108. Mogensen M., Jensen K.V., Jorgensen M.J., and Primdahl S. Progress in understanding SOFC electrodes. Solid State Ionics 150 1-2 (2002) 123-129
109. Norrman K., Hansen K.V., and Mogensen M. Time-of-flight secondary ion mass spectrometry as a tool for studying segregation phenomena at nickel-YSZ interfaces. J Eur Ceram Soc 26 6 (2006) 967-980
110. Liu Y.L., and Jiao C.G. Microstructure degradation of an anode/electrode interface in SOFC studied by transmission electron microscopy. Solid State Ionics 176 5-6 (2005) 435-442
111. Uchida H., Osada N., and Watanabe M. High-performance electrode for steam electrolysis mixed conducting ceria-based cathode with highly-dispersed Ni electrocatalysts. Electrochem Solid State Lett 7 12 (2004) A500-A502
112. Osada N., Uchida H., and Watanabe M. Polarization behavior of SDC cathode with highly dispersed Ni catalysts for solid oxide electrolysis. J Electrochem Soc 153 5 (2006) A816-A820
113. Ostergard M.J.L., Clausen C., Bagger C., and Mogensen M. Manganite-zirconia composite cathodes for SOFC: influence of structure and composition. Electrochim Acta 40 12 (1995) 1971-1981
114. Mogensen M., Primdahl S., Jorgensen M.J., and Bagger C. Composite electrodes in solid oxide fuel cells and similar solid state devices. J Electroceram 5 2 (2000) 141-152
115. Wang W.S., Huang Y.Y., Jung S., Vohs J.M., and Gorte R.J. A comparison of LSM, LSF and LSCo for solid oxide electrolyzer anodes. J Electrochem Soc 153 11 (2006) A2066-A2070
116. Doenitz W., and Erdle E. High-temperature electrolysis of water vapor-status of development and perspectives for application. Int J Hydrogen Energy 10 5 (1985) 291-295
117. Hino R., Haga K., Aita H., and Sekita K. R&D on hydrogen production by high-temperature electrolysis of steam. Nucl Eng Des 233 (2004) 363-375
118. Kim J.H., Song R.H., Song K.S., Hyun S.H., Shin D.R., and Yokokawa H. Fabrication and characteristics of anode-supported flat-tube solid oxide fuel cell. J Power Sources 122 2 (2003) 138-143
119. Lu Y.X., Schaefer L., and Li P.W. Numerical study of flat-tube high power density solid oxide fuel cell: part I. Heat/mass transfer and fluid flow. J Power Sources 140 2 (2005) 331-339
120. Hwang J.J., Chen C.K., and Lai D.Y. Computational analysis of species transport and electrochemical characteristics of a MOLB-type SOFC. J Power Sources 140 2 (2005) 235-242
121. Ramakrishna P.A., Yang S., and Sohn C.H. Innovative design to improve the power density of a solid oxide fuel cell. J Power Sources 158 1 (2006) 378-384
122. Riess I. On the single chamber solid oxide fuel cells. J Power Sources 175 1 (2008) 325-337
123. Hao Y., Shao Z.P., Mederos J., Lai W., Goodwin D.G., and Haile S.M. Recent advances in single-chamber fuel cells: experiment and modelling. Solid State Ionics 177 19-25 (2006) 2013-2021
124. Liu Y., Hashimoto S.I., Nishino H., Takei K., Mori M., Suzuki T., et al. Fabrication and characterization of micro-tubular cathode-supported SOFC for intermediate temperature operation. J Power Sources 174 1 (2007) 95-102
125. Ni M., Leung M.K.H., and Leung D.Y.C. Energy and exergy analysis of hydrogen production by solid oxide steam electrolyzer plant. Int J Hydrogen Energy 32 18 (2007) 4648-4660
126. Martinez-Frias J, Pham AQ, Aceves SM. Analysis of a high-efficiency natural gas-assisted steam electrolyzer for hydrogen production. American Society of Mechanical Engineers, International mechanical engineering congress and exposition, New York, NY, November 11-16, 2001.
127. Wang W., Gorte R., and Vohs J. Analysis of the performance of the electrodes in a natural gas assisted steam electrolysis. Chem Eng Sci 63 3 (2008) 765-769
128. Gopalan S., Ye G.S., and Pal U.B. Regenerative, coal-based solid oxide fuel cell-electrolyzers. J Power Sources 162 1 (2006) 74-80
129. Jensen S.H., Larsen P.H., and Mogensen M. Hydrogen and synthetic fuel production from renewable energy sources. Int J Hydrogen Energy 32 15 (2007) 3253-3257
130. Ni M., Leung M.K.H., and Leung D.Y.C. A modelling study on concentration overpotentials of a reversible solid oxide fuel cell. J Power Sources 163 1 (2006) 460-466
131. Ni M., Leung M.K.H., and Leung D.Y.C. An electrochemical model of solid oxide steam electrolyzer for hydrogen production. Chem Eng Technol 29 5 (2006) 636-642
132. Ni M., Leung M.K.H., and Leung D.Y.C. Mathematical modelling of the coupled transport and electrochemical reactions in solid oxide steam electrolyzer for hydrogen production. Electrochim Acta 52 24 (2007) 6707-6718
133. Ni M, Leung MKH, Leung DYC, Micro-scale modelling analyses for advanced design of solid oxide steam electrolyser to enhance hydrogen production. In: Proceedings of the 5th International conference-hydrogen economy and hydrogen treatment of materials (HTM-2007), 21-25 May, 2007, Donetsk, Ukraine, p. 199-05.
134. Demin A., Gorbova E., and Tsiakaras P. High temperature electrolyzer based on solid oxide co-ionic electrolyte: a theoretical model. J Power Sources 171 1 (2007) 205-211
135. Hawkes G.L., O'Brien J.E., Stoots C.M., Herring J.S., and Shahnam M. Computational fluid dynamics model of a planar solid-oxide electrolysis cell for hydrogen production from nuclear energy. Nucl Technol 158 2 (2007) 132-144
136. Herring J.S., O'Brien J.E., Stoots C.M., Hawkes G.L., Hartvigsen J.J., and Shahnam M. Progress in high-temperature electrolysis for hydrogen production using planar SOFC technology. Int J Hydrogen Energy 32 4 (2007) 440-450
137. Dutta S., Morehouse J.H., and Khan J.A. Numerical analysis of laminar flow and heat transfer in a high temperature electrolyzer. Int J Hydrogen Energy 22 9 (1997) 883-895
138. Liu M.Y., Yu B., Xu J.M., and Chen J. Thermodynamic analysis of the efficiency of high temperature steam electrolysis for hydrogen production. J Power Sources 117 2 (2008) 493-499