Diesel engine simulations with multi-dimensional conditional moment closure

Combustion Science and Technology

Volumn 180, Issue 5, 2008, Pages 883-899

  De Paola, G ^a   Mastorakos, E ^a   Wright, Y M ^b   Boulouchos, K ^b  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

^b ETH ZURICH   (Switzerland)

Author keywords

CFD; Conditional moment closure; Diesel engine combustion; Spray autoignition

Indexed keywords

CONDITIONAL MOMENT CLOSURE (CMC); DIESEL ENGINE COMBUSTION; SPRAY AUTOIGNITION;

ALGORITHMS; COMPUTATIONAL FLUID DYNAMICS; IGNITION; MATHEMATICAL MODELS; THERMAL SPRAYING;

DIESEL ENGINES;

EID: 42149106304     PISSN: 00102202     EISSN: 1563521X     Source Type: Journal    
DOI: 10.1080/00102200801894273     Document Type: Conference Paper

References (39)

1. Bertola, A., Li, R., and Boulouchos, K. (2003) Influence of water-diesel fuel emulsions and EGR on combustion and exhaust emission of heavy duty DI Diesel engines equipped with common-rail injection systems. SAE Technical Paper 2003-01-3146.
2. Bertola, A.G. (2003) Technologies for lowest NOx and particulate emissions in DI-diesel engine combustion: influence of injection parameters, EGR and fuel composition. Ph.D. thesis, Swiss Federal Institute of Technology Zurich.
3. Bikas, G. (2001) Kinetic mechanisms for hydrocarbon ignition. Ph.D. thesis, University of Aachen.
4. Bilger, R.W. (2001) Boundary conditions for the CMC equations. Technical report, EU project PLANET.
5. Brown, P.N. and Hindmarsh, A.C. (1989) Reduced storage matrix methods in stiff ODE systems. J. Comp. Appl. Math., 31, 40-91.
6. Colin, O. and Benkenida, A. (2004) The 3-Zones extended coherent flame model (ECFM3Z) for computing premixed/diffusion combustion. Oil Gas Sci. Technol., 59, 593-609.
7. De-Paola, G. (2007) Conditional Moment Closure for Autoignition in Turbulent Flows. Ph.D. thesis, University of Cambridge.
8. Dec, J.E. (1997) A conceptual model of DI diesel combustion based on laser-sheet imaging. SAE Technical Paper 970873.
9. Demoulin, F.X. and Borghi, R. (2002) Modeling of turbulent spray combustion with application to diesel like experiment. Combust. Flame, 129, 281-293.
10. Fairweather, M. and Woolley, R.M. (2004) First-order conditional moment closure modeling of turbulent, nonpremixed methane flames. Combust. Flame, 138, 3-19.
11. Halstead, M.P., Kirsch, L. J., and Quinn, C.P. (1977) The autoignition of hydrocarbon fuels at high temperatures and pressures - fitting of a mathematical model. Combust. Flame, 30, 45-60.
12. Hasse, C. and Peters, N. (2005) A two mixture fraction flamelet model applied to split injections in a DI Diesel engine. Proc. Comb. Inst., 30(2), 2755-2762.
13. Hergart, C. and Peters, N. (2001) Applying the representative interactive flamelet model to evaluate the potential effect of wall heat transfer on soot emissions in a small-bore DI Diesel engine. ASME J. Eng. Gas Turbines Power, 124, 1042-1052.
14. Kim, I.S. and Mastorakos, E. (2005) Simulations of turbulent lifted jet flames with two-dimensional conditional moment closure. Proc. Comb. Inst., 30, 911-918.
15. Kim, I.S. and Mastorakos, E. (2006) Simulations of turbulent non-premixed counterflow flames with first-order conditional moment closure. Flow Turbul. Combust., 76, 133-162.
16. Kim, I.S., De-Paola, G., and Mastorakos, E. (2006) Simulations of n-heptane combustion in a constant-volume vessel with first-order CMC. Technical report, EU project NICE.
17. Kim, S-K., Yu, Y., Ahn, J., and Kim, Y-M. (2004) Numerical investigation of the autoignition of turbulent gaseous jets in a high-pressure environment using the multiple-RIF model. Fuel, 83, 375-386.
18. 2 flame over a bluff-body. Combust. Flame, 130, 94-111.
19. Kim, W.T. and Huh, K.Y. (2002b) Numerical simulation of spray autoignition by the first order conditional moment closure model. Proc. Comb. Inst., 29, 569-576.
20. Klimenko, A.Y. (1995) Note on the conditional moment closure in turbulent shear flows. Phys. Fluids, 7(2), 446-448.
21. Klimenko, A.Y. and Bilger, R.W. (1999) Conditional moment closure for turbulent combustion. Prog. Energy Combust. Sci., 25, 595-687.
22. Kong, S.C., Han, Z., and Reitz, D. (1995) Application of a diesel ignition and combustion model for multidimensional engine simulation. SAE Technical Paper 950278.
23. Kortschik, C., Honnet, S., and Peters, N. (2005) Influence of curvature on the onset of autoignition in a corrugated counterflow mixing field. Combust. Flame, 142, 140-152.
24. Kronenburg, A., Bilger, R.W., and Kent, J.H. (2000) Modeling soot formation in turbulent methane-air jet diffusion flames. Combust. Flame, 121, 24-40.
25. Liu, S., Hewson, J.C., Chen, J.H., and Pitsch, H. (2004) Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow. Combust. Flame, 137, 320-339.
26. Magnussen, B.F. and Hjertager, B.H. (1977) On mathematical modelling of turbulent combustion with special emphasis on soot formation and combustion. Proc. Comb. Inst., 16, 719-727.
27. Mortensen, M. and Bilger, R.W. (2007) Personal communication.
28. Peters, N. (1984) Laminar diffusion flamelet models in non-premixed turbulent combustion. Prog. Energy Combust. Sci., 10, 319-339.
29. Pires Da Cruz, A., Baritaud, T.A., and Poinsot, T.J. (2001) Self-ignition and combustion modeling of initially nonpremixed turbulent systems. Combust. Flame, 124, 65-81.
30. Pitsch, H., Barths, H., and Peters, N. (1996) Three-dimensional modelling of NOx and soot formation in DI-diesel engines using detailed chemistry based in the representative interactive flamelets. SAE Technical Paper 962057.
31. Richardson, E.S., Chakraborty, N., and Mastorakos, E. (2007) Analysis of direct numerical simulations of ignition fronts in turbulent non-premixed flames in the context of conditional moment closure. Proc. Combust. Instit., 31, 1683-1690.
32. Rogerson, J.W., Kent, J.H., and Bilger, R.W. (2007) Conditional moment closure in a bagasse-fired boiler. Proc. Combust. Instit., 31, 2805-2811.
33. Roomina, M.R. and Bilger, R.W. (2001) Conditional Moment Closure (CMC) predictions of a turbulent methane-air jet flame. Combust. Flame, 125, 1176-1195.
34. STAR-CD 2004. STAR-CD V3.20, Methodology. CD adapco Group, http://www.adapco.com.
35. Tap, F.A. and Veynante, D. (2005) Simulation of flame lift-off on a diesel jet using a generalized flame surface density modeling approach. Proc. Comb. Inst., 30, 919-926.
36. Wan, Y.P., Pitsch, H., and Peters, N. (1997) Simulation of autoignition delay and location of fuel sprays under diesel engine relevant conditions. SAE Technical Paper 971590.
37. Wright, Y.M. (2005) Numerical investigation of turbulent spray combustion with conditional moment closure. Ph.D. thesis, Swiss Federal Institute of Technology Zurich.
38. Wright, Y.M., De-Paola, G., Boulouchos, K., and Mastorakos, E. (2005) Simulations of spray autoignition and flame establishment with two-dimensional CMC. Combust. Flame, 143, 402-419.
39. Zhang, Y.Z., Kung, E.H., and Haworth, D.C. (2005) A PDF method for multidimensional modeling of HCCI engine combustion: effects of turbulence/chemistry interactions on ignition timing and emissions. Proc. Comb. Inst., 30, 2763-2771.