Flow regimes in wet conical spouted beds using glass bead mixtures

Particuology

Volumn 6, Issue 2, 2008, Pages 72-80

  Bacelos, Marcelo S ^a   Freire, José Teixeira ^a  

^a FEDERAL UNIVERSITY OF SÃO CARLOS   (Brazil)

Author keywords

Binary and ternary mixtures; Conical spouted bed; Pressure fluctuation; Processing of pastes; Spouting regimes; Spouting stability

Indexed keywords

BINARY MIXTURES; CONCENTRATION (PROCESS); FLOW VELOCITY; GAUSSIAN DISTRIBUTION; GLYCEROL; PARTICLE SIZE;

BINARY AND TERNARY MIXTURES; MONOPARTICLES; PRESSURE FLUCTUATION; PROCESSING OF PASTES; SPOUTING REGIMES; SPOUTING STABILITY;

ELEMENTARY PARTICLES;

EID: 41949084450     PISSN: 16742001     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.partic.2008.01.001     Document Type: Article

References (47)

1. Aguado R., Olazar M., Bilbao J., and Barona A. Pyrolysis of sawdust in a conical spouted bed reactor. Yields and product composition. Industrial & Engineering Chemistry Research 39 (2000) 1925-1933
2. Aguado R., Olazar M., Gaisán B., Prieto R., and Bilbao J. Kinetics of polystyrene pyrolysis in a conical spouted bed reactor. Chemical Engineering Journal 92 (2003) 91-99
3. Aguado R., Prieto R., San José M.J., Alvarez S., Olazar M., and Bilbao J. Defluidization modelling of pyrolysis of plastics in a conical spouted bed reactor. Chemical Engineering and Processing 44 (2005) 231-235
4. Bacelos M.S., and Freire J.T. Stability of spouting regimes in conical spouted beds with inert particle mixtures. Industrial & Engineering Chemistry Research 45 2 (2006) 808-817
5. Bacelos M.S., Passos M.L., and Freire J.T. Effect of interparticle forces on the conical spouted bed behavior of wet particles with size distribution. Powder Technology 174 3 (2007) 114-126
6. Bacelos, M. S., Spitzner Neto, P. I., Silveira, A. M., & Freire, J. T. (2004). Analysis of drying of pastes in spouted beds. In 14th international drying symposium (IDS2004) (C, 1537).
7. Bacelos M.S., Spitzner Neto P.I., Silveira A.M., and Freire J.T. Analysis of fluid dynamics behavior of conical spouted bed in presence of pastes. Drying Technology 23 3 (2005) 427-453
8. Barret N., and Fane A. Drying of liquid material in a spouted bed. In: Mujumdar A.S., and Roques M.A. (Eds). Drying '89 (1990), Hemisphere Publishing Corporation, New York 415-420
9. Bilbao J., Olazar M., Romero A., and Arantes J.M. Design and operation of a jet spouted bed reactor with continuous catalytic feed in the benzyl alcohol polymerization. Industrial & Engineering Chemistry Research 26 (1987) 1297-1304
10. Birchal V.S., Huang L., Mujumdar A.S., and Passos M.L. Spray dryers: Modeling and simulation. Drying Technology 24 3 (2006) 359-371
11. Birchal V.S., Passos M.L., Wildhagen G.R.S., and Mujumdar A.S. Effect of spray-dryer operating variables on the whole milk powder quality. Drying Technology 23 3 (2005) 611-636
12. Correa N.A., Correa R.G., and Freire J.T. Adaptive control of paste drying in spouted bed using the GPC algorithm. Brazilian Journal of Chemical Engineering 17 (2000) 639-648
13. Costa Jr. E.F., Cardoso M., and Passos M.L. Simulation of drying suspension in spout-fluid beds of inert particles. Drying Technology 19 (2001) 1975
14. Costa I.A., Ferreira M.C., and Freire J.T. Analysis of regime transitions and flow instabilities in vertical conveying of coarse particles using different solid feeding systems. Canadian Journal of Chemical Engineering 82 1 (2004) 48-59
15. Costa Jr. E.F., Freire F.B., Freire J.T., and Passos M.L. Spouted beds of inert particles for drying suspension. Drying Technology 24 3 (2006) 315-325
16. Daleffe R.V., Ferreira M.C., and Freire J.T. Drying of pastes in vibrofluidized beds: Effects of the amplitude and frequency of vibration and of the dimensionless vibration number on the bed fluid-dynamics. Drying Technology 23 9-11 (2005) 1765-1781
17. Daleffe R.V., and Freire J.T. Analysis of fluid-dynamic behavior of fluidized and vibrofluidized bed containing glycerol. Brazilian Journal of Chemical Engineering 21 1 (2004) 35-46
18. de Velden M.V., Baeyens J., Dougan B., and McMurdo A. Investigation of operational parameters for an industrial CFB combustor of coal, biomass and sludge. China Particuology 5 4 (2007) 247-254
19. Epstein N., and Grace J.R. Spouting of particles solids. In: Fayed M.E., and Otten L. (Eds). Handbook of powder science & technology. 2nd ed. (1997), Chapman & Hall, New York 532-567
20. Ferreira M.C., and Freire J.T. Fluid dynamics characterization of a pneumatic bed using a spouted bed type solid feeding system. Canadian Journal of Chemical Engineering 70 10 (1992) 905-910
21. Ferreira M.C., and Narimatsu C.P. Vertical pneumatic conveying in dilute- and dense-phase flows: Experimental study of the influence of particle density and diameter on fluid dynamic behavior. Brazilian Journal of Chemical Engineering 18 3 (2001) 221-232
22. Freitas L.A.P., Dogan O.M., Lim C.L., Grace J.R., and Bai D. Identification of flow regimes in slot-rectangular spouted beds using pressure fluctuations. Canadian Journal of Chemical Engineering 82 (2004) 60-73
23. Geldart D. Gas fluidization technology (1986), John Wiley & Sons, London
24. Grace J.R. Contacting modes and behavior classification of gas-solid and other two-phase suspensions. Canadian Journal of Chemical Engineering 64 (1986) 353-363
25. Kumar A., and Roy G.K. Bed dynamics of gas-solid fluidized bed with rod promoter. China Particuology 5 4 (2007) 261-266
26. Liu H., and Guo Q. Fluidization in combined acoustic-magnetic field for mixtures of ultrafine particles. China Particuology 5 1-2 (2007) 111-115
27. Mathur K.B., and Epstein N. Spouted beds (1974), Academic Press Inc., New York
28. Olazar M., San José M.J., Aguayo A.T., Arandes J.M., and Bilbao J. Stable operation conditions for gas-solid contact regimes in conical spouted beds. Industrial & Engineering Chemistry Research 31 (1992) 1784-1792
29. Olazar M., San José M.J., Alvarez S., Morales A., and Bilbao J. Design of conical spouted beds for the handling of low-density solids. Industrial & Engineering Chemistry Research 43 2 (2004) 655-661
30. Olazar M., San José M.J., Peñas F.J., Arandes J.M., Aguayo A.T., and Bilbao J. Stability and hydrodynamics of conical spouted beds with binary mixtures. Industrial & Engineering Chemistry Research 32 (1993) 2826-2834
31. Passos M.L., Trindade A.L.G., d'Angelo J.V.H., and Cardoso M. Drying of black liquor in spouted bed of inert particles. Drying Technology 22 (2004) 1041-1068
32. Pham Q.T. Behavior of conical spouted-bed dryer for animal blood. Canadian Journal of Chemical Engineering 61 (1983) 426-434
33. Pigeon R.G., and Carberry J.J. Fluidized bed catalytic reactor: A learning model for fast reaction. Industrial & Engineering Chemistry Research 29 6 (1990) 1013-1019
34. Rocha S.C.S., Taranto O.P., Silva V.A., Gonçalvez C.H., and Raghavan G.S.V. Pressure drop fluctuation analysis as a tool for obtaining the fluid-dynamic regimes in spouted beds. Drying 98A (1998) 512-518
35. San José M.J., Olazar M., Aguayo A.T., Arandes J.M., and Bilbao J. Design factors of conical spouted beds and jet spouted beds. Industrial & Engineering Chemistry Research 32 6 (1993) 1245-1250
36. San José M.J., Olazar M., Peñas F.J., and Bilbao J. Segregation in conical spouted beds with binary and ternary mixtures of equidensity spherical particles. Industrial & Engineering Chemistry Research 33 (1994) 1838-1844
37. Schneider T., and Bridgwater J. The stability of wet spouted beds. Drying Technology 11 2 (1993) 277-301
38. Spitzner Neto P.I., Cunha F.O., and Freire J.T. The influence of the paste feed in the minimum spouting velocity. Brazilian Journal of Chemical Engineering 18 (2001) 243-251
39. Spitzner Neto P.I., Cunha F.O., and Freire J.T. Effect of the presence of paste in a conical spouted bed dryer with continuous feeding. Drying Technology 20 4-5 (2002) 789-811
40. Taranto, O. P., Rocha, S. C. S., & Raghavan, G. S. V. (1997). Monitoring spouted bed regimes through the analysis of bed pressure drop fluctuations. In Proceedings of 7th Canadian chemical engineering conference.
41. Tardin Jr. P.R., Goldstein Jr. L., Lombardi G., and Pagliuso J.D. On the mechanical attrition and fragmentation of particles in a fast fluidized bed. Industrial & Engineering Chemistry Research 40 19 (2001) 4141-4150
42. Trindade A.L.G., Passos M.L., Costa Jr. E.F., and Biscaia Jr. E.C. The effect of interparticle cohesive forces on the simulation of fluid flow in spout-fluid beds. Brazilian Journal of Chemical Engineering 21 (2004) 113-125
43. Uemaki O., and Tsuji T. Gasification of a sub-bituminous coal in a two-stage spouted bed reactor. In: Ostergaard K., and Sorensen A. (Eds). Fluidization engineering foundation (1960), Engineering Foundation, New York 497-504
44. Xu J., Bao X., Wei W., Bi H., Grace J.R., and Lim J.C. Mutual information functions of differential pressure fluctuations in spouted beds. Industrial & Engineering Chemistry Research 43 18 (2004) 5754-5762
45. Xu J., Bao X., Wei W., Shi G., Shen S., Bi H.T., et al. Statistical and frequency analysis of pressure fluctuations in spouted beds. Powder Technology 140 (2004) 141-154
46. 2 nano-particles in magnetic field assisted fluidization. China Particuology 5 (2007) 169-173
47. Zhong W., Zhang M., Jin B., and Chen X. Flow pattern and transition of rectangular spout-fluid bed. Chemical Engineering and Processing 45 (2006) 734-746