A unified fuel spray breakup model for internal combustion engine applications

Atomization and Sprays

Volumn 18, Issue 5, 2008, Pages 375-426

  Chryssakis, Christos ^a,b   Assanis, Dennis N ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

^b NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

[No Author keywords available]

Indexed keywords

ATOMIZATION; INTERNAL COMBUSTION ENGINES; MATHEMATICAL MODELS; NOZZLES;

AERODYNAMIC DRAG; MULTIHOLE NOZZLE;

SPRAYING;

ATOMIZATION; INTERNAL COMBUSTION ENGINES; MATHEMATICAL MODELS; NOZZLES; SPRAYING;

EID: 41349114073     PISSN: 10445110     EISSN: None     Source Type: Journal    
DOI: 10.1615/atomizspr.v18.i5.10     Document Type: Article

References (51)

1. C. Arcoumanis and M. Gavaises, Linking Nozzle Flow with Spray Characteristics in a Diesel Fuel Injection System, Atomization and Sprays, vol. 8, pp. 307-347, 1998.
2. C. Soteriou, R. Andrews, and M. Smith, Direct Injection Diesel Sprays and the Effect of Cavitation and Hydraulic Flip on Atomization, SAE Technical Paper Series 950080, 2005.
3. D. P. Schmidt and M. L. Corradini, The Internal Flow of Diesel Fuel Injector Nozzles: A Review, Int. J. Engine Res., vol. 2, no. 1, pp. 1-22, 2001.
4. M. Kubo, A. Sakakida, and A. Iiyama, Technique for Analyzing Swirl Injectors of Direct-Injection Gasoline Engines, SAE Technical Paper Series 2001-01-0964, 2001.
5. E. V. Berg, W. Edelbauer, A. Alajbegovic, R. Tatschl, M. Volmajer, B. Kegl, and L. C. Ganippa, Coupled Simulations of Nozzle Flow, Primary Fuel, Jet Breakup, and Spray Formation, ASME J. Eng. Gas Turbines Power, vol. 127, no. 1, p. 897, 2005.
6. R. D. Reitz, Modeling Atomization Processes in High-Pressure Vaporizing Sprays, Atomization Sprays Technol., vol. 3, pp. 309-337, 1987.
7. R. D. Reitz and R. Diwakar, Structure of High-Pressure Fuel Sprays, SAE Technical Paper Series 870598, 1987.
8. M. A. Patterson and R. D. Reitz, Modeling the Effects of Fuel Spray Characteristics on Diesel Engine Combustion and Emission, SAE Technical Paper Series 980131, 1998.
9. P. J. O'Rourke and A. A. Amsden, The TAB Method for Numerical Calculation of Spray Droplet Breakup, SAE Technical Paper Series 872089, 1987.
10. R. D. Reitz and F. V. Braceo, On the Dependence of Spray Angles and Other Spray Parameters on Nozzle Design and Operating Conditions, SAE Technical Paper Series 790494, 1979.
11. G. M. Faeth, L.-P. Hsiang, and P.-K. Wu, Structure and Breakup Properties of Sprays, Int. J. Multiphase Flow, vol. 21, Suppl., pp. 99-127, 1995.
12. A. A. Amsden, KTVA-3V: A Block-Structured KIVA Program for Engines with Vertical or Canted Valves, Los Alamos National Laboratory LA-13313-MS, July, 1997.
13. L. Bayvel and Z. Orzechowski, Liquid Atomization, Taylor & Francis, New York, 1993.
14. K. Y. Huh, E. Lee, and J.-Y. Koo, Diesel Spray Atomization Model Considering Nozzle Exit Turbulence Conditions, Atomization and Sprays, vol. 8, pp. 453-469, 1998.
15. B. R. Munson, D. F. Young, and T. H. Okiishi, Fundamentals of Fluid Mechanics, 2nd ed., Wiley, New York, 1994.
16. R. P. Fraser and P. Eisenklam, Research into the Performance of Atomizers for Liquids, Imp. Coll. Chem. Eng. Soc. L., vol. 7, pp. 52-68, 1953.
17. H. B. Squire, Investigation of the Instability of a Moving Liquid Film, Br. J. Appl. Phys., vol. 4, pp. 167-169, 1953.
18. N. Dombrowski and W. R. Johns, The Aerodynamic Instability and Disintegration of Viscous Liquid Sheets, Chem. Eng. Sci., vol. 18, pp. 203-214, 1963.
19. V. Dorfner, J. Domnick, F. Durst, and R. Koehler, Viscosity and Surface Tension Effects in Pressure Swirl Atomization, Atomization and Sprays, vol. 5, pp. 261-285, 1995.
20. Z. Han, Sc. Parrish, P. V. Farell, and R. D. Reitz, Modeling Atomization Processes of Pressure-Swirl Hollow-Cone Fuel Sprays, Atomization and Sprays, vol. 7, pp. 663-684, 1997.
21. D. P. Schmidt, I. Nouar, P. K. Senecal, C. J. Rutland, J. K. Martin, and R. D. Reitz, Pressure-Swirl Atomization in the Near Field, SAE Technical Paper Series 1999-01-0496, 1999.
22. P. K. Senecal, D. P. Schmidt, I. Nouar, C. J. Rutland, R. D. Reitz, and M. L. Corradini, Modeling High-Speed Viscous Liquid Sheet Atomization, Int. J. Multiphase Flow, vol. 25, pp. 1073-1097, 1999.
23. C. A. Chryssakis, D. N. Assanis, J.-K. Lee, and K. Nishida, Fuel Spray Simulation of High-Pressure Swirl-Injector for DISI Engines and Comparison with Laser Diagnostic Measurements, SAE Technical Paper Series 2003-01-0007, 2003.
24. C. A. Chryssakis, D. N. Assanis, J.-K. Lee, and K. Nishida, An Investigation of the Breakup Mechanisms for Swirl Sprays from High-Pressure Swirl Injectors, ICLASS 2003, 9th International Conference on Liquid Atomization & Spray Systems, Sorrento, Italy, July, 2003.
25. G. M. Faeth, L.-P. Hsiang, and P.-K. Wu, Structure and Breakup Properties of Sprays, Int. J. Multiphase Flow, vol. 21, Suppl., pp. 99-127, 1995.
26. J. Lee and K. Nishida, Analyses of Pre-Swirl Spray Formation and its Breakup Processes of D.I. Gasoline Spray, 9th International Conference on Liquid Atomization & Spray Systems, Sorrento, Italy, 2003.
27. B. T. Helenbrook and C. F. Edwards, Quasi-Steady Deformation and Drag of Uncontaminated Liquid Drops, Int. J. Multiphase Flow, vol. 28, pp. 1631-1657, 2002.
28. R. Clift, J. R. Grace, and M. E. Weber, Bubbles, Drops and Particles, Academic Press, New York, 1978.
29. L.-P. Hsiang and G. M. Faeth, Near-Limit Drop Deformation and Secondary Breakup, Int. J. Multiphase Flow, vol. 18, no. 5, pp. 635-652, 1992.
30. C. Aalburg, B. van Leer, and G. M. Faeth, Deformation and Drag Properties of Round Drops Subjected to Shock Wave Disturbances, AIAA J., vol. 41, no. 12, Dec., 2003.
31. J. O. Hinze, Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes, AIChE J., vol. 1, pp. 289-295, 1955.
32. A. A. Ranger and J. A. Nichols, Aerodynamic Shattering of Liquid Drops, AIAA J., vol. 7, pp. 285-290, 1969.
33. S. A. Krzeczkowski, Measurement of Liquid Droplet Disintegration Mechanisms, Int. J. Multiphase Flow, vol. 6, pp. 227-239, 1980.
34. B. E. Gelfand, Droplet Breakup Phenomena in Flows with Velocity Lag, Prog. Energy Combust. Sci., vol. 22, pp. 201-265, 1996.
35. M. Pilch and C. A. Erdman, Use of Breakup Time Data and Velocity History Data to Predict the Maximum Size of Stable Fragments for Acceleration-Induced Breakup of a Liquid Drop, Int. J. Multiphase Flow, vol. 13, no. 6, pp. 741-757, 1987.
36. L.-P. Hsiang and G. M. Faeth, Drop Properties after Secondary Breakup, Int. J. Multiphase Flow, vol. 19, no. 5, pp. 721-735, 1993.
37. A. H. Lefebvre, Atomization and Sprays, Hemisphere Publishing, New York, 1989.
38. W.-H. Chou and G. M. Faeth, Temporal Properties of Secondary Drop Breakup in the Bag Breakup Regime, Int. J. Multiphase Flow, vol. 24, pp. 889-912, 1998.
39. Z. Dai and G. M. Faeth, Temporal Properties of Secondary Drop Breakup in the Multimode Breakup Regime, Int. J. Multiphase Flow, vol. 27, pp. 217-236, 2001.
40. W.-H. Chou, L.-P. Hsiang, and G. M. Faeth, Temporal Properties of Drop Breakup in the Shear Breakup Regime, Int. J. Multiphase Flow, vol. 23, no. 4, pp. 651-669, 1997.
41. H. Schlichting, Boundary Layer Theory, 6th ed., McGraw-Hill, New York, 1968.
42. B. D. Fishburn, Boundary layer stripping of liquid drops fragmented by Taylor instability, Acta Astronaut., vol. 1, pp. 1267-1284, 1974.
43. S. S. Hwang, Z. Liu, and R. D. Reitz, Breakup mechanisms and drag coefficients of high-speed vaporizing liquid drops, Atomization and Sprays, vol. 6, pp. 353-376, 1996.
44. C. H. Lee, and R. D. Reitz, An Experimental Study of the Effect of Gas Density on the Distortion and Breakup Mechanism of Drops in High Speed Gas Stream, Int. J. Multiphase Flow, 26, pp. 229-244, 2000.
45. G. I. Taylor, The instability of liquid surfaces when accelerated in a direction perpendicular to their planes, Proc. Royal Soc. A, vol. 201, pp. 192-196, 1950.
46. Y. Yue, C. Powell, R. Cuenca, R. Poola, J. Wang, and S. E. Parrish, Measurement of Gasoline Spray Propagation by Means of Synchrotron X-Ray, 15th Annual Conference on Liquid Atomization and Spray Systems, Madison, WI, May, 2002.
47. C. F. Powell, Y. Yue, J. Liu, and S.-K. Cheong, Instantaneous Mass Measurement of Fuel Sprays Using Time-Resolved X-Radiography, 15th Annual Conference on Liquid Atomization and Spray Systems, Madison, WI, May, 2002.
48. C. Habchi, D. Verhoeven, C. Huynh Huu, L. Lambert, J. L. Vanhemelryck, and T. Baritaud, Modeling Atomization and Breakup in High-Pressure Diesel Sprays, SAE Technical Paper Series 970881, 1997.
49. J. Kang, C. Bae, and K. O. Lee, Initial Development of Non-Evaporating Diesel Sprays in Common Rail Injection Systems, Int. J. Engine Res., vol. 4, no. 4, pp. 283-298, 2003.
50. B. Vanzieleghem, C. Chryssakis, R. Grover, D. Assanis, H. Im, and V. Sick, Modeling of Gasoline Direct Injection Mixture Formation Using KIVA-3V: Development of Spray Breakup and Wall Impingement Models and Validation with Optical Engine Planar Laser Induced Fluorescence, COMODIA 2004, Yokohama, Japan, Aug., 2004.
51. G. A. Lechner, T. J. Jacobs, C. A. Chryssakis, D. N. Assanis, and R. M. Siewert, Evaluation of a Narrow Spray Cone Angle, Advanced Injection Timing Strategy to Achieve Partially Premixed Compression Ignition Combustion in a Diesel Engine, SAE 2005 Transactions, SAE, Washington, DC, SAE Paper No. 2005-01-0167, 2005.