On the modeling of hardening in metals during non-proportional loading

International Journal of Plasticity

Volumn 24, Issue 6, 2008, Pages 1039-1070

  Wang, J ^a   Levkovitch, V ^a   Reusch, F ^a   Svendsen, B ^a   Huetink J ^b   van Riel, M ^b  

^a TU DORTMUND UNIVERSITY   (Germany)

^b UNIVERSITY OF TWENTE   (Netherlands)

Author keywords

Cross hardening; Induced anisotropy; Metal forming; Non proportional loading; Springback

Indexed keywords

HARDENING; MATHEMATICAL MODELS; MICROSTRUCTURAL EVOLUTION; RESIDUAL STRESSES;

CROSS HARDENING; INDUCED ANISOTROPY; NON-PROPORTIONAL LOADING; SPRINGBACK;

METAL FORMING;

EID: 40849097539     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.08.009     Document Type: Article

References (44)

1. Banu, M., Bouvier, S., Haddadi, H., Maier, C., Tabacaru, V., Teodosiu, C., 2001. Selection and identification of the elastoplastic models for the materials used in the benchmarks of the 3DS research project. Report of LPMTM-CNRS, IMS 1999 000051. University Paris 13, Villetaneuse, France.
2. Barlat F., Ferreira Duarte J.M., Gracio J.J., Lopes A.B., and Rauch E.F. Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample. International Journal of Plasticity 19 (2003) 1215-1244
3. Barlat F., Yoon J.W., and Cazacu O. On linear transformations of stress tensors for the description of plastic anisotropy. International Journal of Plasticity 23 5 (2007) 876-896
4. Boehlke T., Risy G., and Bertram A. A texture component model for anisotropic polycrystal plasticity. Computational Materials Science 32 (2005) 284-293
5. Bouvier S., Alves J., Oliveira M., and Menezes L. Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes. Computational Materials Science 32 (2005) 301-315
6. Bouvier S., Gardey B., Haddadi H., and Teodosiu C. Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests. Journal of Materials Processing Technology 174 (2006) 115-126
7. Bouvier S., Teodosiu C., Haddadi H., and Tabacaru V. Anisotropic work-hardening behaviour of structural steels and aluminium alloys at large strains. Journal of Physics IV France 105 (2003) 215-222
8. Choi Y., Han C.-S., Lee J.K., and Wagoner R.H. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part i: Theory. International Journal of Plasticity 22 9 (2006) 1745-1764
9. Choi Y., Han C.-S., Lee J.K., and Wagoner R.H. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part ii: Applications. International Journal of Plasticity 22 9 (2006) 1765-1783
10. Choi Y., Walter M.E., Lee J.K., and Han C.-S. Observations of anisotropy evolution and identification of plastic spin parameters by uniaxial tensile tests. Journal of Mechanics of Materials and Structures 1 2 (2006) 309-331
11. Dafalias Y. The plastic spin. Journal of Applied Mechanics 52 (1985) 865-871
12. Dafalias Y.F. Plastic spin: necessity or redundancy. International Journal of Plasticity 14 (1998) 909-931
13. Dafalias Y.F. Orientational evolution of plastic orthotropy in sheet metals. Journal of the Mechanics and Physics of Solids 48 (2000) 2231-2255
14. Ghosh A.K., and Backofen W.A. Strain-hardening and instability in biaxially stretched sheets. Metallurgical Transactions 4 (1973) 1113-1123
15. Haddadi H., Bouvier S., Banu M., Maier C., and Teodosiu C. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification. International Journal of Plasticity 22 (2006) 2226-2271
16. Haddag B., Balan T., and Abed-Meraim F. Investigation of advanced strain-path dependent material models for sheet metal forming simulations. International Journal of Plasticity 23 6 (2007) 951-979
17. Hiwatashi S., Bael A.V., Houtte P.V., and Teodosiu C. Modelling of plastic anisotropy based on texture and dislocation structure. Computational Materials Science 9 (1997) 274-284
18. Hiwatashi S., Bael A.V., Houtte P.V., and Teodosiu C. Prediction of forming limit strains under strain-path changes: application of an anisotropic model based on texture and dislocation structure. International Journal of Plasticity 14 (1998) 647-669
19. Hoc T., and Forest S. Polycrystal modelling of if-ti steel under complex loading path. International Journal of Plasticity 17 (2001) 65-85
20. Hoferlin, E., 2001. Incorporation of an accurate model with a texture based local description of the yield locus. Ph.D. thesis, Katholieke Universiteit Leuven.
21. Hu W. Constitutive modeling of orthotropic sheet metals by presenting hardening-induced anisotropy. International Journal of Plasticity 23 4 (2007) 620-639
22. Hu Z., Rauch E.F., and Teodosiu C. Work-hardening behavior of mild steel under stress reversal at large strains. International Journal of Plasticity 8 (1992) 839-856
23. Li S., Hoferlin E., Bael A., Houtte P., and Teodosiu C. Finite element modeling of plastic anisotropy induced by texture and strain-path change. International Journal of Plasticity 19 (2003) 647-674
24. Lopes A.B., Barlat F., Gracio J.J., Ferreira Duarte J.M., and Rauch E.F. Effect of texture and microstructure on strain hardening anisotropy for aluminum deformed in uniaxial tension and simple shear. International Journal of Plasticity 19 (2003) 1-22
25. Montleau, P.D., Programming of Teodosiu's hardening model. IAP P5/08 Progress Report, Mechanical Engineering, 2004, University of Liege, Belgium.
26. Peeters B., Bacroix B., Teodosiu C., Van Houtte P., and Aernoudt E. Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain: Part II. The observations of dislocation sheets in an if steel during two-stage strain paths and their representation in terms of dislocation densities. Acta Materialia 49 9 (2001) 1621-1632
27. Peeters B., Kalidindi S.R., Teodosiu C., Houtte P.V., and Aernoudt E. A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase b.c.c. polycrystals. Journal of the Mechanics and Physics of Solids 50 4 (2002) 783-807
28. Peeters B., Seefeldt M., Teodosiu C., Kalidindi S.R., Van Houtte P., and Aernoudt E. Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. an integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an if steel during two-stage strain paths. Acta Materialia 49 9 (2001) 1607-1619
29. Pijlman, H., Brinkman, J., Huétink, J., Vegter, H., 2000. Material modelling of sheet metal by bi-axial loading tests. In: Proceedings of IMECE 2000, ASME International Mechanical Engineering Congress and Exposition, pp. 95-115.
30. Pijlman, H.H., 2001. Sheet material characterisation by multi-axial experiments. Ph.D. thesis, University of Twente, The Netherlands.
31. Rauch E.F., and Schmitt J.H. Dislocation substructures in mild steel deformed in simple shear. Material Science and Engineering A 113 (1989) 441-448
32. Rauch E.F., and Thuillier S. Rheological behaviour of mild steel under monotonic loading conditions and cross-loading. Material Science and Engineering A164 (1993) 255-259
33. Rohleder, M., Roll, K., Brosius, A., Kleiner, M., 2001. Investigation of springback in sheet metal forming using two different testing methods. In: Proceedings of 4th International ESAFORM Conference on Material Forming. Liège, Belgium, pp. 321-324.
34. Simo J.C., and Hughes T.J.R. Computational Inelasticity (1998), Springer Verlag
35. Strauven Y., and Aernoudt E. Directional strain softening in ferritic steel. Acta Metallurgica 35 (1987) 1029-1036
36. Svendsen B. On the modeling of anisotropic elastic and inelastic material behaviour at large deformation. International Journal of Solids and Structures 38 (2001) 9579-9599
37. Teodosiu C., and Hu Z. Evolution of the intragranular microstructure at moderate and large strains: modelling and computational significance. In: Shen S.F., and Dawson P.R. (Eds). Simulation of Materials Processing: Theory, Methods and Applications (1995), Balkema, Rotterdam 173-182
38. th Risø International Symposium on Material's Science: Modelling of Structure and Mechanics of Materials from Microscale to Product. Risø National Laboratory, Roskilde, Denmark, pp. 149-168.
39. Thuillier S., and Rauch E.F. Development of microbands in mild steel during cross loading. Acta Metallurgica et Materialia 42 (1994) 1973-1983
40. Wang, J., Levkovitch, V., Reusch, F., Svendsen, B., 2005. Modeling and simulation of induced anisotropic hardening and springback in sheet metals during non-proportional loading. In: Proceedings NUMISHEET2005. Detroit, Michigan, USA, pp. 234-239.
41. Wang J., Levkovitch V., Reusch F., and Svendsen B. Modeling and simulation of directional hardening in metals during non-proportional loading. Journal of Materials Processing Technology 176 (2006) 430-432
42. Wilson D.V., and Bate P.S. Influences of cell walls and grain boundaries on transient responses of an if steel to changes in strain path. Acta Metallurgica Material 42 (1994) 1099-1111
43. Yoon J., Barlat F., Gracio J.J., and Rauch E.F. Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets. International Journal of Plasticity 21 (2005) 2426-2447
44. Yoon J.W., Yang D.Y., Chung K., and Barlat F. A general elasto-plastic finite element formulation based on incremental deformation theory for planar anisotropy and its application to sheet metal forming. International Journal of Plasticity 15 (1999) 35-67