Design aspects of pulsed sieve plate columns

Chemical Engineering Journal

Volumn 138, Issue 1-3, 2008, Pages 389-415

  Yadav, R L ^a   Patwardhan, A W ^a  

^a UNIVERSITY OF MUMBAI   (India)

Author keywords

Design; Drop size; Flooding; Hold up; Mass transfer; Pulsed sieve plate column

Indexed keywords

COMPUTATIONAL GEOMETRY; CORRELATION METHODS; DROPS; MASS TRANSFER;

OPERATING PARAMETERS; PULSED SIEVE PLATE COLUMN;

PRODUCT DESIGN;

COMPUTATIONAL GEOMETRY; CORRELATION METHODS; DROPS; MASS TRANSFER; PRODUCT DESIGN;

EID: 40749086790     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2007.06.015     Document Type: Article

References (65)

1. W.J.D. Van Dijck, U.S. Patent 2,011,186 (1935).
2. Wiegandt H.F., and Von Berg R.L. Key to better extraction. Chem. Eng. (1954) 183-188
3. Sege G., and Woodfield F.W. Pulse column variables. Chem. Eng. Prog. (1954) 396-402
4. Smoot L.D., Mar B.W., and Babb A.L. Flooding characteristics and separation efficiencies of pulsed sieve-plate extraction columns. Ind. Eng. Chem. 51 9 (1959) 1005-1010
5. Sehmel G.A., and Babb A.L. Hold-up studies in pulsed sieve plate solvent extraction column. I&EC Process Des. Dev. 2 1 (1963) 38-42
6. Berger R., Leuckel W., and Wolf D. Investigations into the operating characteristics of pulsed sieve plate columns. Chem. Ind. (1978) 760-764
7. Kumar A., and Hartland S. Prediction of dispersed phase hold-up in pulsed perforated-plate extraction columns. Chem. Eng. Process. 23 (1988) 41-59
8. Sato T., Sugihara K., and Taniyama I. Performance characteristics of pulsed perforated plate columns. Kogaku Kogaku 27 (1963) 583-586
9. Miyauchi T., and Oya H. Longitudinal dispersion in pulsed perforated-plate columns. AIChE 11 (1965) 395-402
10. Boyadzhiev L., and Spassov M. On the size of drops in pulsed and vibrating plate extraction columns. Chem. Eng. Sci. 37 (1982) 337-340
11. Kumar A., and Hartland S. Correlations for dispersed phase hold-up in pulsed sieve-plate liquid-liquid extraction columns. Chem. Eng. Res. Des. 61 (1983) 248-252
12. Tung L.S., and Luecke R.H. Mass transfer and drop size in pulsed-plate extraction columns. Ind. Eng. Chem. Process Des. Dev. 25 (1986) 664-673
13. Thornton J.D. Liquid-liquid extraction part III: the effect of pulse waveform and plate geometry on the performance and throughput of a pulsed column. Trans. Inst. Chem. Eng. 35 (1957) 316-330
14. McAllister R.A., Groenier W.S., and Ryan A.D. Correlation of flooding in pulsed, perforated extraction columns. Chem. Eng. Sci. 22 (1967) 931-944
15. Kagan S.Z., Aerov M.E., Lonik V., and Volkova T.S. Some hydrodynamic and mass transfer problems in pulsed sieve-plate extractors. Int. Chem. Eng. 5 4 (1965) 656-661
16. W.S. Groenier, R.A. McAllister, A.D. Ryon, ORNL-3890 Report, 1966.
17. Berger R., and Walter K. Flooding in pulsed sieve plate extractors. Chem. Eng. Sci. 40 12 (1985) 2175-2184
18. Lorenz M., Haverland H., and Vogelpohl A. Fluid dynamics of pulsed sieve plate extraction columns. Chem. Eng. Technol. 13 (1990) 411-422
19. Tribess A., and Brunello G. Flooding in pulsed sieve plate extraction columns with mass transfer effects. Brazellian J. Chem. Eng. 15 1 (1998)
20. T. Misek, R. Berger, J. Schröter, Standard Test Systems for Liquid Extraction, Rugby, England, 1985.
21. Logsdail D.H., and Slater M.J. Pulsed perforated-plate columns. In: Lo T.C., Baird M.H.I., and Hanson C. (Eds). Handbook of Solvent Extraction (1983), John Wiley and Sons, New York 355-371
22. S.C. Jones, On the behaviour of a pulsed extraction column, Ph.D. Thesis, University of Michigan, 1962.
23. Misek T. The hydrodynamic behaviour of pulsed liquid-liquid extractors. Collect. Czech. Chem. Commun. 29 (1964) 1755-1766
24. Angelino H., Arian C., Boyadzhiev L., and Mukharjee S.P. Efficiency of pulsed extraction column with rotary agitators. Br. Chem. Eng. 12 12 (1967) 1893-1895
25. Th. Pilhofer, Habilitationsschrift, Technische Universität München, 1978.
26. M. Ugarcic, Hydrodynamik und Stoffaustausch in Spruh-und gepulsten Siebbodenkolonnen, Ph.D. Thesis, ETH, Zurich, 1981.
27. Kumar A., and Hartland S. Prediction of drop size in pulsed perforated-plate extraction column. Chem. Eng. Commun. 44 (1986) 163-182
28. Jealous A.C., and Johnson H.F. Power requirements for pulse generation in pulsed columns. Ind. Eng. Chem. 47 6 (1955) 1159-1166
29. Khemongkorn V., Molinier J., and Angelino H. Influence of mass transfer direction on efficiency of a pulsed perforated plate column. Chem. Eng. Sci. 33 (1978) 501-508
30. Pietzsch W., and Pilhofer T. Calculation of drop size in pulsed sieve-plate extraction columns. Chem. Eng. Sci. 39 6 (1984) 961-965
31. Pietzsch W., and Blass E. A new method for the prediction of liquid pulsed sieve-tray ejectors. Chem. Eng. Technol. 10 (1987) 73-86
32. Kleczek F., Cauwenberg V., and Rompay P.V. Effect of mass transfer on droplet size in liquid-liquid dispersions. Chem. Eng. Technol. 12 (1989) 395-399
33. Kumar A., and Hartland S. Empirical prediction of operating variables. In: Lo T.C., Baird M.H.I., and Hanson C. (Eds). Handbook of Solvent Extraction (1994), John Wiley and Sons, New York 625-735
34. Kumar A., and Hartland S. Unified correlation for the prediction of drop size in liquid-liquid extraction columns. Ind. Eng. Chem. Res. 35 (1996) 2682-2695
35. Srinivasulu K., Venkatnarsaiah D., and Verma Y.B.G. Drop size distribution in liquid pulsed columns. Bioprocess Eng. 17 (1997) 189-195
36. Luo G.S., Li H.B., Tang X.J., and Wang J.D. Drop breakage in a coalescence-dispersion pulsed-sieve-plate extraction column. Chem. Eng. J. 102 (2004) 185-191
37. Mohanty S., and Vogelpohl A. A simplified hydrodynamic model for a pulsed sieve-plate extraction column. Chem. Eng. Process. 36 (1997) 385-395
38. Hu S., and Kintner R.C. The fall of single liquid drops through water. AIChE (1955) 42-48
39. Cohen R.M., and Beyer G.H. Performance of a pulse extraction column. Chem. Eng. Prog. 49 6 (1953) 279-286
40. Logsdail D.H., and Thornton J.D. Liquid-liquid extraction part IV: the effect of column diameter upon the performance and throughput of pulsed plate columns. Trans. Inst. Chem. Eng. 35 (1957) 331-342
41. Mishra J.C., and Dutt D.K. Engineering study of hold-up in a perforated plate pulse column for the counter-current flow of two immiscible liquids. Chem. Age India 20 10 (1969) 845-852
42. Bell R.L., and Babb A.L. Hold-up and axial distribution of hold-up in a pulsed sieve-plate solvent extraction column. Ind. Eng. Chem. Proc. Des. Dev. 8 3 (1969) 392-400
43. Hussain A.A., Liang T.B., and Slater M.J. Characteristic velocity of drops in a liquid-liquid extraction pulsed sieve plate column. Chem. Eng. Res. Des. 66 (1988) 541-554
44. Grace J.R., Wairegi T., and Nguyen T.H. Shapes and velocities of single drops and bubbles moving freely through immiscible liquids. Trans. Inst. Chem. Eng. 54 (1976) 167-173
45. Venkatnarsaiah D., and Verma Y.B.G. Dispersed phase hold-up and mass transfer in liquid pulsed column. Bioprocess Eng. 18 (1998) 119-126
46. He C.H., Gao Y.H., Yang S.H., and Edwards D.W. Optimization of the process for recovering caprolactum from wastewater in a pulsed-seive-plate column using green design methodologies. J. Loss Prevent. Process Ind. 17 (2004) 195-204
47. M.F. Buratti, Etude des phenomenes de mélange axial dans les colonnes pulsees equipees de garnissage disques-couronnes, Ph.D. Thesis, Institut National Polytechnique de Lorraine, France, 1988.
48. Nabli M.A., Guiraud P., and Gourdon C. Numerical experimentation: a toll to calculated the axial dispersion coefficient in discs and doughnuts pulsed solvent extraction columns. Chem. Eng. Sci. 52 14 (1997) 2353-2368
49. Chantry W.A., Von Berg R.L., and Wiegandt H.F. Application of pulsation to liquid-liquid extraction. Ind. Eng. Chem. 47 6 (1955) 1153-1159
50. Li W.H., and Newton W.M. Liquid-liquid extraction in a pulsed perforated-plate column. AIChe J. 3 1 (1957) 56-62
51. Sobotic R.H., and Himmelblau D.M. The effect of plate wetting characteristics on pulse column extraction efficiency. AIChe J. 6 4 (1960) 619-624
52. Smoot L.D., and Babb A.L. Mass transfer studies in a pulsed extraction column. Ind. Eng. Chem. Fund. 1 2 (1962) 93-103
53. Bahmanyar H., Chang-Kakoti D.K., Garro L., Liang T.B., and Slater M.J. Mass transfer from single drops in rotating disc, pulsed sieve plate and packed liquid-liquid extraction columns. Trans. IChemE 68 Part A (1990) 74-83
54. Luo G., Li H., Fei W., and Wang J. A simplified correlation of mass transfer in a pulsed sieve plate extraction column. Chem. Eng. Technol. 21 10 (1998) 823-827
55. T. Vatanatham, P. Terasukaporn, P. Lorpongpaiboon, HTU of acetone-toluene-water extraction in a pulsed column, Proceed. Regional Symp. Chem. Eng., Kasetsart University, Bangkok, Thailand, 1999.
56. Li H.B., Luo G.S., Fei W.Y., and Wang J.D. Mass transfer performance in a coalescence-dispersion pulsed sieve plate extraction column. Chem. Eng. J. 78 (2000) 225-229
57. Kumar A., and Hartland S. Correlations for prediction of mass transfer coefficients in single drop systems and liquid-liquid extraction columns. Trans. IChemE 77 Part A (1999) 372-384
58. Newman A.B. The drying of porous solids: diffusion and surface emission effects. Trans. Am. Inst. Chem. Eng. 27 (1931) 203-220
59. Handlos A.E., and Baron T. Mass and heat transfer from drops in liquid-liquid extraction. AIChE J. 3 (1957) 127-136
60. Reissinger K.H., and Marr R. Chem. Ind. Tech. 58 7 (1986) 540-547
61. Haverland H., and Slater M.J. Pulsed sieve plate column. In: Godfrey J.C., and Slater M.J. (Eds). Liquid-Liquid Extraction Equipment (1994), John Wiley and Sons, New York 277-305
62. Heertej P.M., Holve W.A., and Talsma H. Mass transfer between iso-butanol and water in a spray column. Chem. Eng. Sci. 3 (1954) 122-142
63. Usman M.R., Hussain S.N., Rehman L., Bashir M., and Butt M.A. Mass transfer performances in a pulsed sieve plate extraction column. Proc. Pakistan Acad. Sci. 43 3 (2006) 173-179
64. Tang X., Luo G., and Wang J. A dynamic forward mixing model for evaluating the mass transfer performances of an extraction column. Chem. Eng. Sci. 59 (2004) 4457-4466
65. Garner F.H., and Tayeban M. The importance of the weak in mass transfer from both continuous and dispersed phase systems. Anales de la Real Scoiedad Espanola de Fisica Y Quimica B56 (1960) 479-490