Unified correlations for the prediction of drop size in liquid-liquid extraction columns

Industrial and Engineering Chemistry Research

Volumn 35, Issue 8, 1996, Pages 2682-2695

  Kumar, Arun ^a   Hartland, Stanley ^a  

^a ETH ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

DROP SIZE; LIQUID-LIQUID EXTRACTION COLUMNS; MECHANICALLY AGITATED COLUMNS;

CORRELATION METHODS; DROP BREAKUP; EXTRACTION; INTERFACES (MATERIALS); MATHEMATICAL MODELS; MIXING; SURFACE TENSION;

SEPARATORS;

EID: 0030212181     PISSN: 08885885     EISSN: None     Source Type: Journal    
DOI: 10.1021/ie950674w     Document Type: Article

References (122)

1. Al-Aswad, K. K. M. Liquid-Liquid Extraction in a Pilot Scale Rotating Disc Contactor. Ph.D. Thesis, University of Aston in Birmingham, Birmingham, U.K., 1982.
2. Angelino, H.; Alran, C.; Boyadzhiev, L.; Mukherjee, S. P. Efficiency of a Pulsed Extraction Column with Rotary Agitators. Br. Chem. Eng. 1967, 12, 1893-1895.
3. Arai, K.; Konno, M.; Matunaga, Y.; Saito, S. Effect of Dispersed-Phase Viscosity on the Maximum Stable Drop Size for Breakup in Turbulent Flow. J. Chem. Eng. Jpn. 1977, 10, 325-330.
4. Assenov, A.; Penchev, I. Effect of Pulsing Intensity upon Droplet Size in a Plate-Pulsed Extraction Column. Dokl. Bolg. Akad. Nauk 1971, 24, 1381-1384.
5. Aufderheide, E.; Vogelpohl, A. Prediction of Flooding Point in Pulsed Sieve-Plate Extraction Columns Using Experimental Drop-Size Data. Chem.-Ing.-Tech. 1984, 56, MS 1272/84.
6. Bailes, P. J.; Gledhill, J.; Godfrey, J. C.; Slater, M. J. Hydrodynamic Behaviour of Packed, Rotating Disc and Kühni Extraction Columns. Chem. Eng. Res. Des. 1986a, 64, 43-55.
7. Bailes, P. J.; Gledhill, J.; Godfrey, J. C.; Slater, M. J. Investigation of Hydrodynamic Behaviour of a Kühni Extraction Column. Chem.-Ing.-Tech. 1986b, 58, 807-809.
8. Baird, M. H. L; Lane, S. J. Drop Size and Holdup in a Reciprocating Plate Extraction Column. Chem. Eng. Sci. 1973, 28, 947-957.
9. Baird, M. H. I.; Rama Rao, N. V.; Procházka, J.; Sovová, H. Reciprocating-plate Columns. In Liquid-Liquid Extraction Equipment; Godfrey, J. C., Slater, M. J., Eds.; Wiley: Chichester, U.K., 1994; pp 307-362.
10. Batey, W.; Lonie, S. J.; Thompson, P. J.; Thornton, J. D. The Dynamics of Pulsed Plate Extraction Columns. Part 3: Droplet Size Studies in the Absence of Mass Transfer. Report ND-R-1062(D), 1986.
11. Bensalem, A. Hydrodynamics and Mass Transfer in a Reciprocating Plate Extraction Column. Ph. D. Thesis No. 7721, Swiss Federal Institute of Technology, Zürich, Switzerland, 1985.
12. Berger, J. Fundamentals of Mass Transfer in a Liquid-Liquid Spray Column. Ph.D. Thesis No. 6773, Swiss Federal Institute of Technology, Zürich, Switzerland, 1981.
13. Billet, R.; Maćkowiak, J. Hydraulic Behaviour and Mass Transfer in an Extraction Column with Stacked Packings. Ger. Chem. Eng. 1980, 3, 234-240.
14. Blažej, L.; Vajda, M.; Bafrncová, S. Hydrodynamic Properties of Rotary-Disc Extractor. I. Distribution of the Sizes of Drops and Their Residence Times. Chem. Zvesti 1978, 32, 314-327.
15. Boyadzhiev, L.; Spassov, M. On the Size of Drops in Pulsed and Vibrating Plate Extraction Columns. Chem. Eng. Sci. 1982, 37, 337-340.
16. Bühler, B. S. Fluid Dynamics and Heat Transfer in a Liquid-Liquid Spray Tower. Ph.D. Thesis No. 6027, Swiss Federal Institute of Technology, Zürich, Switzerland, 1977.
17. Calabrese, R. V.; Chang, T. P. K.; Dang, P. T. Drop Breakup in Turbulent Stirred-Tank Contactors. Part I: Effect of Dispersed-Phase Viscosity. AIChE J. 1986, 32, 657-666.
18. Chang-Kakoti, D. K.; Fei, W-Y.; Godfrey, J. C.; Slater, M. J. Drop Sizes and Distributions in Rotating Disc Contactors Used for Liquid-Liquid Extraction. J. Sep. Process Technol. 1985, 6, 40-48.
19. Dalingaros, W.; Kumar, A.; Hartland, S. Effect of Physical Properties and Dispersed-Phase Velocity on the Size of Drops Produced at a Multinozzle Distributor. Chem. Eng. Process. 1986, 20, 95-102.
20. Davies, J. T. Drop Sizes of Emulsions Related to Turbulent Energy Dissipation Rates. Chem. Eng. Sci. 1985, 40, 839-842.
21. de Chazal, L. E. M.; Ryan, J. T. Formation of Organic Drops in Water. AIChE J. 1971, 17, 1226-1229.
22. Dongaonkar, K. R.; Pratt, H. R. C.; Stevens, G. W. Mass Transfer and Axial Dispersion in a Kühni Extraction Column. AIChE J. 1991, 37, 694-704.
23. Elenkov, D.; Boyadzhiev, L.; Kyuchukov, G.; Naplatanova, M. On the Efficiency of Pulsed Extraction Columns with Perforated Plates, Izv. Khim. 1978, 11, 265-272.
24. Ergun, S. Fluid Flow through Packed Columns. Chem. Eng. Prog. 1952, 48, 89-94.
25. Ferrarini, R. Calculation of Flow and Heat Transfer in Liquid-Liquid Spray Columns. VDI-Forschungsheft 551; VDI-Verlag: Düsseldorf, Germany, 1972.
26. Fischer, E. A. Drop Sizes in Agitated Liquid-Liquid Extraction Columns. Effect of Physical Properties, Column Geometry, Agitator Type and Agitation Speed. Verfahrenstechnik 1971, 5, 360-365.
27. Fischer, E. A. Fluid Dynamics and Mass Transfer in an Agitated Liquid-Liquid Extraction Column. Ph.D. Thesis No. 5016, Swiss Federal Institute of Technology, Zürich, Switzerland, 1973.
28. Garg, M. O.; Pratt, H. R. C. Steady-State Droplet Size Distribution in a Pulsed Plate Extraction Column. Proc. Int. Solvent Extr. Conf. 1983, 157-158.
29. Garwin, L.; Smith, B. D. Liquid-Liquid Spray-Tower Operation in Heat Transfer. Chem. Eng. Prog. 1963, 49, 591-602.
30. Gayler, R.; Pratt, H. R. C. Liquid-Liquid Extraction, Part V: Further Studies of Droplet Behaviour in Packed Columns. Trans. Inst. Chem. Eng. 1953, 37, 69-77.
31. Gayler, R.; Roberts, N. W.; Pratt, H. R. C. Liquid-Liquid Extraction: Part IV: A further Study of Hold-up in Packed Columns. Trans. Inst. Chem. Eng. 1953, 31, 57-68.
32. Goldmann, G. Determination and Interpretation of the Characteristics of an Agitated Extraction Column. Ph.D. Thesis, Technische Universität München, München, Germany, 1986.
33. Hafez, M. M.; Baird, M. H. I. Power Consumption in a Reciprocating Plate Extraction Column. Trans. Inst. Chem. Eng. 1978, 56, 229-238.
34. Harkins, W. D.; Brown, F. E. The Determination of Surface Tension (Free Surface Energy), and the Weight of Falling Drops: The Surface Tension of Water and Benzene by the Capillary Height Method. J. Am. Chem. Soc. 1919, 41, 499-524.
35. Hartung, J.; Weiss, S. Mass Transfer in Rotating Disk Extractors. Chem. Tech. (Leipzig) 1982, 34, 300-304.
36. Häusler, P. Comparative Studies of Agitated Extraction Columns. Ph.D. Thesis No. 7907, Swiss Federal Institute of Technology, Zürich, Switzerland, 1985.
37. Hayworth, C. B.; Treybal, R. E. Drop Formation in Twc-Liquid-Phase Systems. Ind. Eng. Chem. 1950, 42, 1174-1181.
38. Henton, J. E. Backmixing in Liquid-Liquid Extraction Spray Columns. Ph.D. Thesis, University of British Columbia, Vancouver, Canada, 1967.
39. Hinze, O. Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes. AIChE J. 1955, 1, 289-295.
40. Horvath, M. Fluid Dynamics and Mass Transfer in a Liquid-Liquid Spray Column. Ph.D. Thesis No, 5774, Swiss Federal Institute of Technology, Zürich, Switzerland, 1976.
41. Horvath, M.; Steiner, L.; Hartland, S. Prediction of Drop Diameter, Hold-Up and Backmixing Coefficients in Liquid-Liquid Spray Columns. Can. J. Chem. Eng. 1978, 56, 9-18.
42. Hughmark, G. A. Liquid-Liquid Spray Column Drop Size, Hold-Up and Continuous Phase Mass Transfer. Ind. Eng. Chem. Fundam. 1967, 6, 408-413.
43. Hupfauf, A. Local Heat Transfer and Backmixing in a Liquid-Liquid Spray Column. Ph.D. Thesis No. 5093, Swiss Federal Institute of Technology, Zürich, Switzerland, 1973.
44. Husung, G. Thesis on Investigations for Scaleup of Rotating Disk Extractors. Ph.D. Thesis, Technische Universität Graz, Graz, Austria, 1976.
45. Izard, J. A. Prediction of Drop Volumes in Liquid-Liquid Systems. AIChE J. 1972, 18, 634-638.
46. Jeffreys, G. V.; Al-Aswad, K. K. M.; Mumford, C. J. Drop-Size Distribution and Dispersed Phase Hold-up in a Large Rotating Disc Contactor. Sep. Sci. Technol. 1981, 16, 1217-1245.
47. Jones, S. On the Behaviour of a Pulsed Extraction Column. Ph.D. Thesis, The University of Michigan, Ann Arbor, MI, 1963.
48. Kagan, S. Z.; Aerov, M. E.; Volkova, T. S.; Trukhanov, V. G. Calculation of the Drop Diameter in Rotary-Disc Extractors. J. Appl Chem. USSR (Engl Transl.) 1964, 37, 67-73.
49. Kagan, S. Z.; Aerov, M. E.; Lonik, V.; Volkova, T. S. Some Hydrodynamic and Mass-Transfer Problems in Pulsed Sieve-Plate Extractors. Int. Chem. Eng. 1965, 5, 656-661.
50. Kagan, S. Z.; Kovalev, Yu, N.; Zakharychev, A. P. Drop Size with Drop-Type Flow Conditions out of Nozzles in Liquid-Liquid Systems. Theor. Found. Chem. Eng. (Transl, of Tear. Osn. Khim. Tekhnol.) 1973, 7, 514-518.
51. Kamath, M. S.; Subba Rau, M. G. Prediction of Operating Range of Rotor Speeds for Rotating Disc Contactors. Can. J. Chem. Eng. 1985, 63, 578-584.
52. Kaplan, A. U. Extraction Column Hydrodynamic Measurements. Unpublished report, UMIST, 1982.
53. Khemangkorn, V. A Study of Mass Transfer in an Extraction Column with Pulsating Flow. Thèse de Docteur-Ingénieur, Institut National Polytechnique, Toulouse, France, 1976.
54. Korchinsky, W. J.; Al-Hussemi, R. Liquid-Liquid Extraction Column (Rotating Disc Contactor)-Model Parameters from Drop Size Distribution and Solute Concentration Measure-ments. J. Chem. Technol. Biotechnol. 1986, 36, 395-409.
55. Korchinsky, W. J.; Young, C. H. High Flux Mass Transfer: Comparison of Liquid-Liquid Extraction Column and Drop (Handlos-Baron) Model Predictions with Rotating Disc Contactor Performance. Chem. Eng. Sci. 1986, 41, 3053-3061.
56. Korchinsky, W. J.; Loke, C. T.; Cruz-Pinto, J. J. C. Optimisation of Drop Size in Countercurrent Flow Liquid-Liquid Extraction Columns. Chem. Eng. Sci. 1982, 37, 781-786.
57. Korchinsky, W. J.; Al-Husseini, R.; Young, C. H. Liquid-Liquid Extraction Column Mass Transfer - Parameters from Concentration Profiles. Proc. Int. Solvent Extr. Conf. 1983, 106-107.
58. Kubica, J.; Zdunkiewicz, K. Drops Mean Diameter of Dispersed Phase in a Pulsed Extraction Column with Louver or Sieve Plates. Inz. Chem. 1977, 7, 903-919.
59. Kumar, A. Droplet Behaviour in Liquid/Liquid Extraction. Ph.D. Thesis No. 7332, Swiss Federal Institute of Technology, Zürich, Switzerland, 1983.
60. Kumar, A. Hydrodynamics and Mass Transfer in Kühni Extractor. Ph.D. Thesis No. 7806, Swiss Federal Institute of Technology, Zürich, Switzerland, 1985.
61. Kumar, A.; Hartland, S. Prediction of Drop Size Produced by a Multiorifice Distributor. Trans. Inst. Chem. Eng. 1982, 60, 35-39.
62. Kumar, A.; Hartland, S. Correlation for Drop Size in Liquid/Liquid Spray Columns. Chem. Eng. Commun. 1984, 31, 193-207.
63. Kumar, A.; Hartland, S. Prediction of Drop Size in Pulsed Perforated-Plate Extraction Columns. Chem. Eng. Commun. 1986a, 44, 163-182.
64. Kumar, A.; Hartland, S. Prediction of Drop Size in Rotating Disc Extractors. Can. J. Chem. Eng. 1986b, 64, 915-924.
65. Kumar, A.; Hartland, S. Prediction of Dispersed-Phase Holdup and Flooding Velocities in Karr Reciprocating-Plate Extraction Columns. Ind. Eng. Chem. Res. 1988, 27, 131-138.
66. Kumar, A.; Hartland, S. Prediction of Drop Size, Dispersed-Phase Holdup, Slip Velocity, and Limiting Throughputs in Packed Extraction Columns. Chem. Eng. Res. Des. 1994a, 72, 89-104.
67. Kumar, A.; Hartland, S. Empirical Prediction of Operating Variables. In Liquid-Liquid Extraction Equipment; Godfrey, J. C., Slater, M. J., Eds.; Wiley: Chichester, U.K., 1994b; pp 625-735.
68. Kumar, A.; Hartland, S. A Unified Correlation for the Prediction of Dispersed-Phase Hold-Up in Liquid-Liquid Extraction Columns. Ind. Eng. Chem. Res. 1995, 34, 3925-3940.
69. Lane, S. J. M. Eng. Research Report, McMaster University, Hamilton, Ontario, Canada, 1971.
70. Leu, J. T. Fluid Dynamics of Extraction Columns with Ordered Packings. Ph.D. Thesis, Technische Universität Clausthal, Clausthal, Germany, 1995.
71. Lewis, J. B.; Jones, I.; Pratt, H. R. C. Part III: A Study of Droplet Behaviour in Packed Columns. Trans. Inst. Chem. Eng. 1951, 29, 126-148.
72. Lin, F.; Ford, J. D. Drop Size Distribution in a Liquid-Liquid Extraction Column via a Photographic Technique. Can. J. Chem. Eng. 1988, 66, 150-153.
73. Logsdail, D. H.; Slater, M. J. Pulsed Perforated-Plate Columns. In Handbook of Solvent Extraction; Lo, T. C., Baird, M. H. I., Hanson, C., Eds.; Wiley: New York, 1983; pp 355-372.
74. Lorenz, M. Investigation of Fluid Dynamic Behaviour of Pulsed Sieve-Plate Extraction Columns. Ph.D. Thesis, Technische Universität Clausthal, Clausthal, Germany, 1990.
75. Maćkowiak, J.; Billet, R. New Method of Packed Column Design for Liquid-Liquid Extraction Processes with Random and Stacked Packings. Ger. Chem. Eng. 1986, 9, 48-64.
76. Magiera, J.; Żadło, J. Droplet Size of the Dispersed Phase in an Extraction Column with Rotating Discs. Inz. Chem. 1977, 7, 127-142.
77. Maksimenko, M. Z. Breakup of Drops in Extractors with Reciprocating Motion of Plates. Teor. Osn. Khim. Tekhnol. 1981, 15, 310-311.
78. Mao, Z.-Q.; Slater, M. J. Aspects of Drop Behaviour in a Rotating Disc Contactor. Ind. Eng. Chem. Res. 1994, 33, 1780-1785.
79. Marquardt, D. W. An Algorithm for Least-Squares Estimation of Nonlinear Parameters. J. Soc. Ind. Appl. Math. 1963, 11, 431-441.
80. Marr, R. Extraction Columns with Rotating Parts. Chem.-Ing.-Tech. 1978, 50, 337-344.
81. Mersmann, A. Flooding Point of Countercurrent Liquid-Liquid Columns. Chem.-Ing.-Tech. 1980, 52, 933-942.
82. Ming, J. Y.; Yao, S. B. Study on Scale Up of Kühni column. Proc. Int. Solvent Extr. Conf. 1986, 3, 143-147.
83. Miyauchi, T.; Oya, H. Longitudinal Dispersion in Pulsed-Perforated Plate Columns. AIChE J. 1965, 11, 395-402.
84. Mišek, T. Breakup of Drops by a Rotating Disc. Collect. Czech. Chem. Commun. 1963, 28, 426-435.
85. Mišek, T. The Hydrodynamic Behaviour of Pulsed Liquid-Liquid Extractors. Collect. Czech. Chem. Commun. 1964, 29, 1755-1766.
86. Moore, R. J.; Pratt, H. R. C.; Stevens, G. W. Hydrodynamics of a Non-Aqueous System in a Packed Liquid Extraction Column. Solvent Extr. Ion Exch. 1989, 7, 1043-1062.
87. Mumford, C. J.; Al-Hemiri, A. A. A. The Effect of Wetting Characteristics upon the Performance of a Rotating Disc Con-tactor. Proc. Int. Solvent Extr. Conf. 1974, 2, 1591-1617.
88. Nedungadi, K. On the Performance of a Liquid-Liquid Extraction Column packed with Sulzer SMV Static Mixers, Ph.D. Thesis No. 9406, Swiss Federal Institute of Technology, Zürich, Switzerland, 1991.
89. Olney, R. B. Droplet Characteristics in a Countercurrent Contactor. AIChE J. 1964, 10, 827-835.
90. Pakdee-Patrakorn, S. Hydrodynamics of an Extraction Column-Analysis of Breakage of Dispersed Phase. Thèse de Docteur-Ingénieur, Institut National Polytechnique, Toulose, France, 1980.
91. Pietzsch, W.; Blass, E. A New Method for the Prediction of Pulsed Sieve-Tray Extractors. Chem. Eng. Technol. 1987, 10, 73-86.
92. Pietzsch, W.; Pilhofer, Th. Calculation of the Drop Size in Pulsed Sieve-Plate Extraction Columns. Chem. Eng. Sci. 1984, 39, 961-965.
93. Pilhofer, Th. Process Design of Countercurrent Liquid-Liquid Columns. Habilitationsschrift, Technische Universität, München, München, Germany, 1978.
94. Reissinger, K.-H. Design of Pulsed Sieve-Plate Extractors Allowing for Drop-Size and Residence-Time Distributions. Ph.D. Thesis, Technische Universität Graz, Graz, Austria, 1985.
95. Rincón-Rubio, L. M. On the Hydrodynamics of a Wirz-II Extraction Column. Ph.D. Thesis No. 9867, Swiss Federal Institute of Technology, Zürich, Switzerland, 1992.
96. Rincón-Rubio, L. M.; Kumar, A.; Hartland, S. Drop-Size Distribution and Average Drop Size in a Wirz Extraction Column. Chem. Eng. Res. Des. 1994, 72, 493-502.
97. Scheele, G. F.; Meister, B. J. Drop Formation at Low Velocities in Liquid-Liquid Systems: Part I. Prediction of Drop Volume. AIChE J. 1968a, 14, 9-15.
98. Scheele, G. F.; Meister, B. J. Drop Formation at Low Velocities in Liquid-Liquid Systems: Part II. Prediction of Jetting Velocity. AIChE J. 1968b, 14, 15-19.
99. Schmidt, H.; Miller, H. Operating Region, Hold-up, Drop Size and Axial Mixing in Pulsed-Plate Columns with High Dispersed-Phase and Low Continuous-Phase Flow Rates. KFK-Nach. 1982, 14, 154-165.
100. Siebert, A. F. Hydrodynamics and Mass Transfer in Spray and Packed Liquid-Liquid Extraction Columns. Ph.D. Thesis, The University of Texas at Austin, Austin, TX, 1986.
101. Seibert, A. F.; Fair, J. R. Hydrodynamics and Mass Transfer in Spray and Packed Liquid-Liquid Extraction Columns. Ind. Eng. Chem. Res. 1988, 27, 470-481.
102. Shen, Z. J.; Rama Rao, N. V.; Baird, M. H. I. Mass Transfer in a Reciprocating Plate Extraction Column-Effects of Mass Transfer Direction and Plate Material. Can. J. Chem. Eng. 1985, 63, 29-36.
103. Skelland, A. H. P.; Huang, Y.-F. Continuous Phase Mass Transfer During Formation of Drops from Jets. AIChE J. 1979, 25, 80-87.
104. Sleicher, C. A. Maximum Stable Drop Size in Turbulent Flow. AIChE J. 1962, 8, 471-477.
105. Sommeregger, E. Hydrodynamics of Rotating Disk Extractors. Ph.D. Thesis, Technische Universität Graz, Graz, Austria, 1980.
106. Sovov́a, H. Countercurrent Pulsed and Reciprocating Plate Extractors. Prediction of Sauter Mean Diameter. Collect. Czech. Chem. Commun. 1990, 55, 409-425.
107. Späthe, W.; Weiss, S. Investigation of Drop-Size Distribution and Interfacial Area in Rotating Disk Extractors. Wiss. Z. Tech. Hochsch. "Carl Schorlemmer" Leuna-Merseburg 1972, 14, 66-73.
108. Späthe, W.; Möhring, D.; Weiss, S. Hydrodynamics of Rotating Disk Extractors. Verfahrenstechnik 1976, 10, 567-571.
109. Stangl, D.; Miǎek, T. The Effect of Viscosity on Droplet Splitting in ARD and RDC Extractors. Collect. Czech. Chem. Commun. 1982, 47, 2201-2213.
110. Stevens, G. W. Packed Columns. In Liquid-Liquid Extraction Equipment; Godfrey, J. C., Slater, M. J., Eds.; Wiley: Chichester, U. K., 1994; pp 227-245.
111. Streiff, F. A.; Jancic, S. J. Use of Static Mixer Packing in Countercurrent Extraction Columns. Ger. Chem. Eng. 1984, 7, 178-183.
112. Toller, W. Actual Mass Transfer Rates in Pulsed Sieve-Plate Columns during Liquid-Liquid Extraction. Dimlomarbeit, Technisch-Chemisches Laboratorium, Swiss Federal Institute of Technology, Zürich, Switzerland, 1981.
113. Tutaeva, A. N.; Kagan, S. Z. Hydraulics of Pulsed, Sieve-Plate Extractors for Liquid-Liquid Systems. I. Particle Size: Size of Drops and Their Distribution. Tr. Mosk. Khim.-Tekhnol. Inst. 1967, No. 54, 242-247.
114. Ugarčić, M. Fluid Dynamics and Mass Transfer in Spray and Pulsed Sieve-Plate Columns. Ph.D. Thesis No. 6825, Swiss Federal Institute of Technology, Zürich, Switzerland, 1981.
115. Vasallo, G. The Hydrodynamic Behaviour of a Pulsed Column. Report EUR 8597 EN, 1983.
116. Vedaiyan, S. Hydrodynamics of Two-Phase FLow in Spray Columns. Ph.D. Thesis, University of Madras, India, 1969.
117. Weiss, S.; Späthe, W.; Wurfel, R.; Möhring, D. Hydrodynamic Behaviour and Mass Transfer of Extraction Columns with Various Rotating Parts. Proc. Int. Solvent Extr. Conf. 1974, 3, 2315-2337.
118. Wolschner, B. H. Concentration Profiles in Rotating Disk Extractors. Ph.D. Thesis, Technische Universität Graz, Graz, Austria, 1980.
119. Zhang, S. H.; Ni, X. D.; Su, Y. F. Hydrodynamics, Axial Mixing and Mass Transfer in Rotating Disk Contactors. Can. J. Chem. Eng. 1981, 59, 573-583.
120. Zhang, S. H.; Yu, S. C.; Zhou, Y. C.; Su, Y. F. A Model of Liquid-Liquid Extraction Column Performance The Influence of Drop Size Distribution on Extraction Efficiency. Can. J. Chem. Eng. 1985, 63, 212-226.
121. Zhu, S.; Zhang, B.; Shen, Z.; Wang, J. A Study on Two-Phase Flow Characteristics in Pulsed Sieve Plate Column for Liquid-Liquid Extraction. Huagong Xuebao 1982, 1, 1-13.
122. Zhu, F. G.; Ni, X. D.; Zhou, Y. C.; Yu, S. C.; Su, Y. F. A Modified Rotating Disk Contactor with Wire Mesh Coalescers. AIChE Symp. Ser. 1984, 63 (238), 115-123.