Control functions design and implementation of distributed automation systems for manufacturing applications

International Journal of Manufacturing Research

Volumn 1, Issue 4, 2006, Pages 442-465

  Ferrarini, Luca ^a   Veber, Carlo ^a  

^a POLITECNICO DI MILANO   (Italy)

Author keywords

distributed automation systems; IEC 61499; plug and participate; service oriented applications

Indexed keywords

EID: 39749135278     PISSN: 17500591     EISSN: 17500605     Source Type: Journal    
DOI: 10.1504/IJMR.2006.012255     Document Type: Article

References (30)

1. ARC Advisory Group (2001) PLCs: Is there a future? ARC Strategies, Dedham: ARC, 2001.
2. Cai, X., Vyatkin, V. and Hanisch, H-M. (2003) ‘Design and implementation of a prototype control system according to IEC 61499’, IEEE Emerging Technologies and Factory Automation, 2003. Paper presented at the ETFA '03, Vol. 2, pp.16–19, 269–276. In proceedings.
3. Carpanzano, E., Fabbri, R. and Ferrarini, L. (1998) ‘A Structured Methodology for the Design and Implementation of Hybrid Robot Controller’, Paper presented at the IEEE Conference on Control Application ‘98, Trieste, Italy, Sept., 1998, pp.572–577. In proceedings.
4. Cohen, J., Aggarwal, S. and Goland, Y.Y. (2000) ‘Universal Plug and Play Architecture’, Available at: www.upnp.org.
5. Eclipse (2005) ‘The Eclipse project’, Available at: www.eclipse.org.
6. FDCML (2004) Available at: www.fdcml.org.
7. Ferrarini, L. and Carpanzano, E. (2002) ‘A structured methodology for the design and implementation of control and supervision systems for robotic applications’, IEEE Transactions on Control System Technology, Vol. 10, pp.272–279.
8. Ferrarini, L., Romanò, M. and Veber, C. (2006a) ‘Automatic Generation of AWL Code from IEC 61499 Applications’, Paper presented at the INDIN2006, 4th International IEEE Conference on Industrial Informatics, Singapore, 16–18 August, 2006, pp.25–30. In proceedings.
9. Ferrarini, L. and Veber, C. (2004) ‘Implementation approaches for the execution model of IEC 61499 applications’, Paper presented at the INDIN04, IEEE Intern. Conf. on Industrial Informatics, Berlin, Germany, 24–26 June 2004, pp.612–617. In proceedings.
10. Ferrarini, L. and Veber, C. (2005) ‘Design and implementation of distributed hierarchical automation and control systems with IEC 61499’, Paper presented at the INDIN, 3rd International IEEE Conference on Industrial Informatics, August 2005, Perth, Western Australia, pp.74–79. In proceedings.
11. Ferrarini, L., Veber, C., Schwab, C. and Tangermann, M. (2006b) ‘Service-oriented architecture for field control devices’, Paper presented at the INCOM’2006 – 12th IFAC Symposium on Information Control Problems in Manufacturing, May 17–19, 2006, Saint-Etienne, France. In proceedings.
12. Ferrarini, L., Veber, C., Schwab, C., Tangermann M. and Prayati, A. (2005) ‘Control functions development for distributed automation systems using the TORERO approach’, Paper presented at the 16th IFAC World Congress, July 4–8, Prague, Czech Republic. In proceedings.
13. Heck, B.S., Wills, L.M. and Vachtsevanos, G.J. (2003) ‘Software Technology for Implementing Reusable, Distributed Control Systems’, IEEE Control Systems Magazine, Feb., pp.21–35.
14. Holobloc.com (2004) ‘Function block-based, holonic systems technology’, Available at: www.holobloc.com.
15. IAONA, N.N. (2003) ‘Joint technical working group Hard Real-time, first draft for real-time classification’, unpublished working group paper. Available at: www.iaona-eu.org.
16. International Electrotechnical Commission, Technical Committee 65 Working Group 6, IEC-TC65 (2003). Function Blocks for Industrial-Process Measurements and Control System, Parte I, Architecture, 03–01–24, PAS.
17. Jammes, F., Smit, H., Martinez Lastra, J.L. and Delamer, I.M. (2005). ‘Orchestration of Service- Oriented Manufacturing Processes’, Paper presented at the IEEE International Conference on Emerging Technologies and Factory Automation – ETFA, (10th ed.), September, 2005, Catania, Italy. In proceedings.
18. Lewis, R. (2001) ‘Modelling control systems using IEC 61499’, IEE control engineering series; n. 59, The Institution of Electrical Engineers, London, UK.
19. Martinez Lastra, J.L., Lobov, A., Godinho, L. and Nunes, A. (2004) Function Blocks for Industrial- Process Measurement and Control Systems: IEC-61499 Introduction and Run-time Platforms, Tampere University of technology, Institute of Production Engineering, Report 67, Tampere, Finland 2004.
20. Open, Object-Oriented kNowledge Economy for Intelligent Distributed Automation, OOONEIDA (2005) Available at: www.oooneida.info.
21. OSACA (2004) ‘Open system architecture for controls within automation systems’, Available at: http://www.osaca.org.
22. Prayati, A., Koulamas, C., Koubias, S. and Papadopoulos, G. (2004) ‘A methodology for the development of distributed real-time control applications with focus on task allocation in heterogeneous systems’, IEEE trans. on industrial electronics, Vol. 51, pp.1194–1207.
23. Rumpl, W.E., Auinger, F., Dutzler, C. and Zoitl, A. (2002) ‘Platforms for Scalable Flexible Automation Considering the Concepts of IEC 61499’, Paper presented at the IFIP/IEEE Intern. Conf. on Information Technology for Balanced Automation Systems in Manufacturing and Services, pp.25–27, September, 2002, Cancun, Mexico, pp. 237–246.
24. Sanz, R. and Arzen, K.-E. (2003) ‘Trends in Software and Control’, IEEE Control Systems Magazine, June, pp.12–15.
25. Schwab, C. Tangermann, M., Lüder, A., Ferrarini, L., Veber, C. and Fogliazza, G. (2004a) ‘Web based Services to Maintain DCS’s Applications in the TORERO project’, Paper presented at the International Federation of Automatic Control (IFAC) Symposium on Information Control Problems in Manufacturing – INCOM, April 2004, Salvador, Brazil. In proceedings.
26. Schwab, C., Tangermann, M., Lüder, A., Kalogeras, A. and Ferrarini, L. (2004b) ‘Mapping of IEC 61499 Function Blocks to Automation Protocols within the TORERO Approach’, Paper presented at the INDIN04, IEEE Int. Conf. on Industrial Informatics, Berlin, Germany, 24–26 June 2004, pp.149–154. In proceedings.
27. Sünder, C., Zoitl, A., Christensen, J.H., Vyatkin, V., Brennan, R.W., Valentini, A., Ferrarini, L., Strasser, T., Martinez Lastra, J.L. and Auinger, F. (2006) ‘Usability and Interoperability of IEC 61499 based distributed automation systems’, Paper presented at the INDIN2006, 4th International IEEE Conference on Industrial Informatics, Singapore, 16–18 August, 2006, pp.31–37. In proceedings.
28. TORERO Project (2004) ‘IST-2001–37573, Total life cycle web-integrated control, funded by the European Community under the IST Programme (1998–2002)’, Available at: www.uni-magdeburg.de/iaf/cvs/torero.
29. Vyatkin, V. (2003) ‘Intelligent mechatronic components: control system engineering using an open distributed architecture’, Emerging Technologies and Factory Automation. Paper presented at the ETFA '03. IEEE Conference, Vol. 2,16–19 Sept. 2003, pp.277–284. In proceedings.
30. Vyatkin, V., Christensen, J., Martinez Lastra, J.L. and Auinger, F. (2003) ‘Oooneida: An Open, Object-Oriented kNowledge Economy for Intelligent Distributed Automation’, Paper presented at the IEEE Int. Conf. on Industrial Informatics, 2003, INDIN’03, 21–24 Aug. 2003, pp.79–88.