Comparison of the heat generation of light curing units

Journal of Contemporary Dental Practice

Volumn 9, Issue 2, 2008, Pages 065-072

  Bagis, Bora ^a,b   Bagis, Yildirim ^c   Ertas, Ertan ^d   Ustaomer, Seda ^a  

^a KARADENIZ TECHNICAL UNIVERSITY   (Turkey)

^b IADR ^*

^c ANKARA UNIVERSITY   (Turkey)

^d ONDOKUZ MAYIS UNIVERSITY   (Turkey)

Author keywords

Heat generation; Light curing units; Pulp damage

Indexed keywords

HALOGEN; RESIN; XENON;

ANALYSIS OF VARIANCE; ARTICLE; COMPARATIVE STUDY; DENTAL EQUIPMENT; EVALUATION; HEAT; LIGHT; NONPARAMETRIC TEST; PHASE TRANSITION; RADIATION EXPOSURE; SEMICONDUCTOR; TIME;

ANALYSIS OF VARIANCE; COMPOSITE RESINS; DENTAL EQUIPMENT; HALOGENS; HEAT; LIGHT; PHASE TRANSITION; SEMICONDUCTORS; STATISTICS, NONPARAMETRIC; TIME FACTORS; XENON;

EID: 39449100927     PISSN: None     EISSN: 15263711     Source Type: Journal    
DOI: 10.5005/jcdp-9-2-65     Document Type: Article

References (43)

1. Hannig M, Bott B. In vitro pulp chamber temperature rise during composite resin polymerization with various light-curing sources. Dent Mater. 1999; 15:275-281.
2. Shortall AC, Harrington E. Temperature rise during polymerization of light-activated resin composites. J Oral Rehab. 1998; 25:908-913.
3. Uhl A, Mills RW, Jandt KD. Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomater. 2003; 24:1809-1820.
4. Uhl A, Völpel A, Sigusch BW. Influence of heat from light curing units and dental composite polymerization on cells in vitro. J Dent. 2006 Apr;34(4):298-306.
5. Zach L, Cohen G. Thermogenesis in operative techniques, comparison of four methods. J Prosthet Dent. 1962; 12:977-984.
6. Photo M, Scheinin A. Microscopic observations on living dental pulp. Acta Odontol Scand. 1958; 16:303-327.
7. Lohbauer U, Rahiotis C, Krämer N, Petschelt A, Eliades A. The effect of different light-curing units on fatigue behavior and degree of conversion of a resin composite. Dent Mater. 2005; 21:608-615.
8. Bouillaguet S, Caillot C, Forchelet J, Cattani-Lorente M, Wataha JC, Krejc I. Thermal risks from LED- and high-intensity QTH-curing units during polymerization of dental resins. Biomed Res. 2005; 72:260-267.
9. Stewardson DA, Shortal AC, Lumley PJ. Thermal changes and cure depths associated with a high intensity light activation unit. J Dent. 2005; 32;643-651.
10. Hussey DL, Biagioni PA, Lamey PJ. Thermographic measurement of temperature change during resin composite polymerization in vivo. J Dent. 1995; 23:267-271.
11. Wataha JC, Lockwood E, Lewis J, Wesser LM. Biological effects of blue light from dental curing units. Dent Mater. 2004; 20:150-157.
12. Usumez A, Nilgün O. Temporary increase during resin cement polymerization under ceramic restoration: Effect type of curing unit. Int J Prosthodont. 2004; 17;200-204.
13. Althoff O, Hartung M. Advances in light curing. J Dent. 2000; 13:77-81.
14. Stahl F, Ashworth SH, Jandt KD, Mills RW. Light emitting diode (LED) polymerization of dental composites: flexural properties and polymerisation potential. Biomater. 2000; 21:1379-85.
15. Turkkahramanan H, Kucukesmen HC. Orthodontic Bracket Shear Bond Strengths Produced by Two High-power Light-emitting Diode Modes and Halogen Light. Angle Orthodont. 2005; 75:854-857.
16. Söderholm KJ. Chemistry of synthetic resins. In: Phillips' science of dental materials. 10th ed. Philadelphia: WB Saunders, 1996; 216.
17. Visible light-cured and activating units. Council on Dental Materials, Instruments, and Equipment. JADA. 1985; 110:100-23.
18. William J, Anneke C, Bush A. Comparison of polymerization by light-emitting diode and halogenbased light-curing units. Am J Dent Assoc. 2002; 133:335-341.
19. Eldeniz AU, Usumez A, Usumez S, Ozturk N. Pulpal temperature rise during light-activated bleaching. J Biomed Mater Res B Appl Biomater. 2005; 72;254-259.
20. Uzel A, Buyukyilmaz T, Kayalioglu M, Uzel I. Temperature Rise During Orthodontic Bonding With Various Light-curing Units-An Invitro study. Angle Orthodont. 2004; 76:330-334.
21. Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J. 1999; 186:388-91.
22. Jandt KD, Mills RW, Blackwell GB, Ashworth SH. Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent Mater. 2000; 16(1):41-7.
23. Rueggeberg FA, Twiggs SW, Caughman WF, Khajotia S. Lifetime intensity profiles of light-curing units. J Dent Res. 1996; 75:380.
24. Whitters CJ, Girkin JM, Carey JJ. Curing of dental composites by use of InGaN light-emitting diodes. Opt Lett. 1999; 24:67-68.
25. Bennett AW, Watts DC. Performance of two blue light-emitting-diode dental light curing units with distance and irradiation-time. Dent Mater. 2004; 20:72-79.
26. Nakamura S, Mukai T, Senoh M. Candela-class high brightness InGaN/AlGaN double heterostructure blue-light-emitting diodes. Appl Phys Lett 1994; 64:1687-9.
27. Haitz RH, Craford MG, Wiessman RH. Handbook of optics. Vol. 2: Devices, measurements, and properties. New York: McGraw-Hill, 1995; 121-123.
28. Perimedde AP, Sheriffiss M, Irelands AJ. An in vivo study to compare a light and a conventional quartz halogen curing light in ortodontiv bonding. Eur J Orthod. 2004; 26:573-577.
29. Klocke A, Korbmacher HM, Lothar G. Huck, Kahl-Nieke B. Curing lights for orthodontic bonding. Am J Orthod Dentofacial Orthop. 2002; 122:643-8.
30. Sfondrini MF, Cacciafesta V, Pistorio A, Sfondrini G. Effects of conventional and high-intensity lightcuring on enamel shear bond strength of composite resin and resin-modified glass-ionomer. Am J Orthod Dentofacial Orthop. 2000; 119:30-5.
31. Peutzfeld A, Sahafi A, Asmussen F. Characterization of resin composites polymerized with curing units. Dent Mater. 2000; 16:330-336.
32. McCabe JF. Cure performance of light-activated composites by differential thermal analysis (DTA). Dent Mater. 1985; 1:231-234.
33. in vitro. Dent Mater. 1990; 6:99-102.
34. Vaidyanathan J, Vaidyanathan TK. Computer-controlled differential calorimetry of dental composites,.IEEE Trans Biomed Eng. 1991; 131:319-325.
35. Al-Qudah AA, Mitchell CA, Biagioni PA, Hussey PL. Thermographic investigation of contemporary resin-containing dental materials. J Dent. 2005; 33:593-602.
36. Strang R, Patterson CJW, McLundie AC, Cummings A, Smail SRJ. In vitro temperature rises produced by five polymerising light sources. Restorative Dent. 1988; 4:33-35.
37. McCabe JF, Wilson HF. The use of differential scanning calorimetry for the evaluation of dental materials. I. Cements, cavity lining materials and anterior restorative materials. J Oral Rehabil. 1980; 7:103-110.
38. Cacciafestaa V, Sfondrinib MF, Scribantec A, Boehmed A, Brinkmann PG. Effect of Light-tip Distance on the Shear Bond Strengths of Composite Resin. Angle Orthodont 2005; 75:386-391.
39. Price RB, Ehrnford L, Andreou P, Felix CA. Comparison of quartz-tungsten-halogen, light-emitting diode, and curing lights. J Adhes Dent. 2003; 5(3):193-207.
40. Cacciafesta V, Sfondrini MF, Barina E, Scribante A, Garino C, Klersye C. Effect of different light sources and guides on shear bond strength of brackets bonded with 2 adhesive systems. Am J Orthod Dentofacial Orthop. 2005; 128:99-102.
41. Yap UJ, Soh MS. Thermal emission by different light-curing units. Oper Dent. 2003; 28:260-266.
42. Uhl A, Robin W, Klaus D. Jandt Polymerization and light-induced heat of dental composites cured with LED and halogen technology. Biomater. 2003; 24:1809-1820.
43. Danesh G, Davids H, Duda S, Kaup M, Ott K, Schafer E. Temperature rise in the pulp chamber induced by a conventional halogen light-curing source and a lamp. Am J Dent. 2004; 17:203-8.