Dispersibility of Barium Titanate suspension in the presence of polyelectrolytes: A review

Journal of Dispersion Science and Technology

Volumn 29, Issue 2, 2008, Pages 230-239

  Tripathy, Sushree Swarupa ^a   Raichur, Ashok M ^a  

^a INDIAN INSTITUTE OF SCIENCE   (India)

Author keywords

Barium titanate; Colloidal; Dispersion; Polyelectrolyte

Indexed keywords

BARIUM TITANATE; POLYELECTROLYTES; STABILIZATION; SURFACE ACTIVE AGENTS; SUSPENSIONS (FLUIDS);

BIOSURFACTANT; COLLOIDAL STABILITY; POLYMERIC DISPERSANT;

COLLOIDS;

BARIUM TITANATE; COLLOIDS; POLYELECTROLYTES; STABILIZATION; SURFACE ACTIVE AGENTS; SUSPENSIONS (FLUIDS);

EID: 39049172933     PISSN: 01932691     EISSN: 15322351     Source Type: Journal    
DOI: 10.1080/01932690701707423     Document Type: Review

References (91)

1. Somasundran, P., Markovic, B., Krishnakumar, S., Yu, X. and Birdi, K. S. (1997) Handbook of Surface and Colloid Chemistry, pp. 127-192. CRC Press, Boca Raton, FL
2. Singh, B. P., Bhattacharjee, S., Besra, L. and Sengupta, D. K. (2004) J. Mater. Sci., 39, p. 2437.
3. Park, J. S. and Han, Y. H. (2005) Ceramics Int., 31, pp. 777-782.
4. Cesarano, J., Aksay, A. and Blier, A. (1988) J. Am. Ceram. Soc., 71:4, pp. 250-255.
5. Cesarano, J. and Aksay, A. (1988) J. Am. Ceram. Soc., 71:12, pp. 1062-1067.
6. Ushifusa, N. and Cima, M. J. (1991) Aqueous processing of mullite-containing green sheets. J. Am. Ceram. Soc., 74:10, pp. 2443-2447.
7. Chartier, T., Souchard, S., Baumard, J. F. and Vesteghem, H. (1996) Degradation of dispersant during milling. J. Eur. Ceram. Soc., 16, pp. 1283-1291.
8. van der Beek, C. G. P., Gontermann-Gehl, U. and Krafczyk, E. (1995) Binder distribution in green ceramic foils. J. Eur. Ceram. Soc., 15:8, pp. 741-758.
9. Phule, P. P. and Risbud, S. H. (1989) Mater. Sci. Eng. B, p. 241.
10. Wu, M., Xu, R., Feng, S., Li, L., Chen, D. and Luo, Y. (1996) J. Mater. Sci., 31, p. 6201.
11. Pinceloup, P., Courtois, C., Leriche, A. and Thierry, B. (1999) J. Am. Ceram. Soc., 82, p. 3049.
12. Hilton, A. D. and Frost, R. (1992) Recent development in the manufacture of BaTiO3 Powders. Key Engineering Materials, 66, pp. 145-183. Trans Tech Publications, Zurich, Switzerland.
13. Cross, L. and Dielectric, E. (1984) Piezoelectric and ferroelectric. Components. Am. Ceram. Soc. Bull., 63, pp. 586-590.
14. Pandey, D., Singh, A. P. and Tiwari, V. S. (1992) Developments in ferroelectric ceramics for capacitor applications. Bull. Mater. Sci., 15:5, pp. 391-402.
15. Hennings, D., Metzmacher, C. and Schreinemacher, B. (2001) J. Am. Ceram. Soc., 84, p. 179.
16. Buscaglia, M., Buscaglia, V., Viviani, M., Nanni, P. and Hanuskova, M. (2000) J. Eur. Ceram. Soc., 20, p. 1997.
17. Wegmann, M., Clemens, F., Hendryb, A. and Graule, T. (2006) Dispersion of lanthanoid-coated barium titanate in a paraffin-based extrusion binder system. Ceramics Int., 32, pp. 147-156.
18. Leong, Y. K. and Boger, D. V. (1991) Surface chemistry and rheological properties of zirconia suspensions. J. Rheol. (NY)., 35:1, pp. 149-165.
19. Leong, Y. K., Scales, P. J., Healy, T. W. and Boger, D. V. (1995) Effect of particle size on colloidal zirconia rheology at the isoelectric point. J. Am. Ceram. Soc., 78:8, pp. 2209-2212.
20. Kagawa, M., Omori, M. and Syono, Y. (1987) Surface characterization of zirconia after reaction with water. J. Am. Ceram. Soc., 70:9, pp. C-212-C-213.
21. Derjaguin, B. V. and Landau, L. D. (1941) Theory of stability of highly charged lyophobi sols and adhesion of highly charged particles in solutions of electrolytes. Acta Physicochim. URSS., 14, pp. 633-652.
22. Verwey, E. J. W., Th, J. and Overbeek, G. (1948) Theory of stability of lyophobic colloids, Elsevier, Amsterdam, The Netherlands
23. Lee, S. W., Cho, J. M. and Sigmund, W. M. (2002) Surface forces in colloidal processing with nanoparticles. Mat. Manuf. Proc., 17:4, pp. 543-551.
24. Lewis, J. A. (2000) Colloidal processing of ceramics. J. Am. Ceram. Soc., 83:10, pp. 2341-2359.
25. Hunter, R. J. (1981) Zeta Potential in Colloid Science: Principles and Application, p. p. 368. Academic Press, NY
26. Russel, W. B., Saville, D. A. and Schowalter, W. R. (1989) Colloidal Dispersion, p. p. 258. Cambridge University Press, Cambridge
27. Hunter, R. J. (1991) Foundations of Colloid Science, 1, Oxford Science
28. Napper, D. H. (1983) Polymeric Stabilization of Colloidal Dispersions, Academic Press
29. Everett, D. H. (1989) Basics Principles of Colloids, Royal Society of Chemistry
30. Fleer, G. H., Sturat, M. A. C., Scheutjens, J. M. H. M., Cosgrove, T. and Vincent, B. (1993) Polymer at Interfaces, Chapman And Hall, London
31. Shaw, D. J. (1992) Colloid and Surface Chemistry,, Butterworth-Heinemann, Oxford
32. Lopez, M., Rand, B. and Riley, F. (2000) J. Eur. Ceram. Soc., 20, p. 107.
33. Lopez, M., Rand, B. and Riley, F. (2000) J. Eur. Ceram. Soc., 20, p. 1579.
34. Lopez, M., Rand, B. and Riley, F. (2000) J. Eur. Ceram. Soc., 20, p. 1587.
35. Shen, Z. G., Chen, J. F., Zou, H. K. and Yun, J. (2004) Dispersion of nanosized aqueous suspensions of barium titanate with ammonium polyacrylate. J. Colloid Interface Sci., 275, pp. 158-164.
36. Briscoe, B. J., Khan, A. U. and Luckham, P. F. (1998) Stabilising zirconia aqueous suspensions using commercial polyvalent elctrolyte solutions. J. Eur. Ceram. Soc., 18, p. 2141.
37. Huisman, W., Graule, T. and Gauckler, L. J. (1998) Centrifugal casting of zirconia (TZP). J Eur. Ceram. Soc., 18, p. 33.
38. Studart, A. R. (2003) Selection of dispersants for high-alumina zero-cement refractory castables. J. Eur. Ceram. Soc., 23, p. 997.
39. Huisman, W., Chartier, T. and Gauckler, L. J. (1995) Alumina of high reliability by centrifugal casting. J. Eur. Ceram. Soc., 15, p. 811.
40. Lange, F. F. (1989) Powder processing science and technology for increased reliability. J. Am. Ceram. Soc., 72, p. 3.
41. 2 and α-SiC Suspensions with polyelectrolytes. J. Eur. Ceram. Soc., 17, p. 1387.
42. Biggs, S. and Healy, T. W. (1994) Electrosteric stabilization of colloidal zirconia with low molecular weight polyacrylic acid. J. Chem. Soc. Faraday Trans., 90:22, pp. 3415-3421.
43. Greenwood, R. and Kendall, K. (1999) Selection of suitable dispersant for aqueous suspensions of zirconia and titania powders using acoustophoresis. J. Eur. Ceram. Soc., 19, p. 479.
44. 2 suspensions: Effect of dissociation and type of polyelectrolyte. J. Colloid Interfac Sci., 228, p. 73.
45. Tari, G., Ferreira, J. M. F. and Lyckfeldt, O. (1997) Influence of magnesia on colloidal processing of alumina. J. Eur. Ceram. Soc., 17, pp. 1341-1350.
46. Tseng, W. J. and Li, S. Y. (2002) Rheology of colloidal BaTiO3 suspension with ammonium polyacrylate as a dispersant. Mater. Sci. Engineer., pp. 314-319.
47. Hotza, D. and Greil, P. (1995) Mater. Sci. Eng., pp. 206-217.
48. Chen, Z. C., Ring, T. A. and Lemaitre, J. (1992) J. Am. Ceram. Soc., 75:12, pp. 3201-3208.
49. de Laat, A. W. M., Heuvel, G. L.T. van den and Böhmer, M. R. (1995) Colloids Surf. A Physicochem. Eng. Aspects., 98, pp. 61-71.
50. de Laat, A. W. M. and Heuvel, G. L.T. van den (1993) Colloid Surf. A Physicochem. Eng. Aspects., 70, pp. 179-187.
51. Gómez-Yáñez, C., Balmori-Ramírez, H. and Martínez, F. (2000) Ceram. Int., 26, pp. 609-616.
52. Saniger, J. M., Hu, H., Castaño, V. M. and García-Alejandre, J. (1993) Handbook on Characterization Techniques for Solid-solution Interface, The American Ceramic Society, OH, USA
53. Jean, J. -H. and Wang, H. -R. (1998) J. Mater. Res., 13:8, pp. 2245-2250.
54. Jean, J. -H. and Wang, H. -R. (2000) J. Am. Ceram. Soc., 83:2, pp. 277-280.
55. Li, C. C. and Jean, J. H. (2002) Interactions of organic additives with boric oxide in aqueous barium titanate suspensions. J. Am. Ceram. Soc., 85:6, pp. 1441-1448.
56. Chiang, C. W. and Jean, J. H. (2003) Effects of barium dissolution on dispersing aqueous barium titanate suspensions. Mater. Chem. Phys., 80, pp. 647-655.
57. 3 and PZT in water. Materials Research Bulletin, 35, pp. 2555-2563.
58. Paik, U. and Hackley, V. A. (2000) Influence of solids concentration on the isoelectric point of aqueous barium titanate. J. Am. Ceram. Soc., 83:10, pp. 2381-2384.
59. Lopez, B., Fourlaris, M. C. and Riley, G. F. L. (1998) Interaction of barium titanate powders with an aqueous suspending medium. J. Eur. Ceram. Soc., 18, pp. 2183-2192.
60. Mikeska, K. and Cannon, W. R. (1988) Nonaqueous dispersion properties of pure barium titanate for tape casting. Colloid Surf., 29, pp. 305-321.
61. Mikeska, K. R. and Cannon, W. R. (1984) Dispersants for tape casting pure barium titanante. Adv. Ceram., 9, pp. 164-183.
62. Lee, B. I. and Paik, U. (1993) Dispersion of alumina and silica powders in nonaqueous media: Mixed-solvent effects. Ceram. Int., 19, pp. 241-250.
63. Thompson, J. J. (1963) Forming thin ceramics. Am. Ceram. Soc. Bull., 42:9, p. 4889.
64. Morris, J. R. and Cannon, W. R. (1986) Rheology and component interactions in tape casting slurries. In. Materials Research Society Sympsium, Proceedings Materials Research Society:, 60, pp. 135-142. Pittsburgh PA
65. Maekinnon, R. J. and Blum, J. B. (1984) Particle size distribution effects on tape casting of barium titanate. Advances in Ceramics, Forming of Ceramics, 9, pp. 150-157. The American Ceramic Society, Columbus, OH
66. Fiori, C. and Portu, G. D. (1986) Tape casting: A technique for preparing and studying new materials. Brit. Ceram. Proc., 38:12, pp. 213-225.
67. Mistler, R. E., Shanefield, D. J. and Runk, R. B. (1978) Tape casting of ceramics. Ceramic Processing Bulltin, pp. 411-418. John Wiley & Sons, New York
68. Williams, J. C. (1976) Doctor blade process. Treatise on, Material Science and Teclmology, 9, pp. 73-97. Academic Press, New York
69. Shaneiield, D. J. (1984) Tape casting for forming advanced ceramics. Encyclopedia of Materials Science and Engineering, pp. 4855-4858. Pergamon Press, Oxford
70. Fowkes (1985) Interface acid-base/charge-transfer properties. Surface and Interface Bio. Polymers, 1, pp. 337-371. Plenum, New York
71. Bergstrom, L. (1994) Surface and Colloid Chemistry in Advanced ceramics Processing, Marcel Dekker, New York
72. Chartier, T., Jorge, E. and Boch, P. (1993) Dispersion properties of BaTiO3 Tape-casting slurries. J. Eur. Ceram. Soc., 11, p. 387.
73. Bars, P. L., Levitz, P., Messier, A., Francois, M. and Damme, H. V. (1995) Deagglomeration and dispersion of barium titanate and alumina powder in an organic medium. J. Colloid Interface Sci., 175, pp. 400-410.
74. Paik, U., Hackley, V. A., Choi, S. and Jung, Y. (1998) The effect of electrostatic repulsive forces on the stability of BaTiO3 particles suspended in nonaqueous media. Colloids Surf. A: Physicochem. Eng. Aspects, 135, p. 77.
75. 3 powders in ethanol-isopropanol mixtures. Materials Chemistry and Physics, 80, pp. 232-238.
76. Bhattacharjee, S., Paria, M. K. and Maiti, H. S. (1993) J. Mater. Sci., 28, p. 6490.
77. Hsu, K. C., Ying, K. L., Chen, L. P., Yu, B. Y. and Wei, W. C. J. (2005) Dispersion properties of BaTiO3 colloids with amphoteric polyelectrolytes. J. Am. Ceram. Soc., 88:3, pp. 524-529.
78. Zhao, J., Wang, X., Chen, R. and Li, L. (2006) Dispersion of barium titanate in aqueous media. Ceramics Intern., 31, p. 2372.
79. Won, C. Y., Chu, C. C. and Lee, J. D. (1998) J. Polymer Sci. Part A: Polymer Chem., 36, pp. 2949-2959.
80. Wang, X., Lee, B. I. and Larry Mann (2002) Dispersion of barium titanate with polyaspartic acid in aqueous media. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 202, pp. 71-80.
81. 3 with poly(viny1 alcohol) in water. Colloid and Surfaces A: Physicochemical and Engineering Aspects, 71, pp. 147-153.
82. Zhao, J., Wang, X., Gui, Z. and Li, L. (2004) Dispersion of barium titanate with poly(acrylic acid-co-maleic acid) in aqueous media. Ceramics Intern., 30, pp. 1985-1988.
83. Desai, J. D. and Banat, I. M. (1997) Microbial production of surfactants application of the method. Microbiol. Mol. Biol. Rev., pp. 47-64.
84. Mulligan, C. N. (2005) Environmental applications for biosurfactants. Environmental Pollution., 133, pp. 183-198.
85. Raichur, A. M. Dispersion of colloidal alumina using a rhamnolipid biosurfactant. J. Dispersion Sci. Technol., 28, pp. 1272-1277.
86. Manjula, S., Kumar, S. Mahesh, Raichur, A. M., Madhu, G. M., Suresh, R. and Raj, M. A. Lourdu Anthony (2005) A sedimentation study to optimize the dispersion of alumina nanoparticles in water. Cerâmica, 51, pp. 121-127.
87. Rao, P., Tripathy, S. S. and Raichur, A. M. Dispersion of sub-micron zirconia using dolapix CE 64. Colloids Surf. A, 3021, pp. 553-558.
88. Kamiya, H., Gomi, K., Iida, Y., Tanaka, K., Yoshiyasu, T. and Kakiuchi, T. (2003) Preparation of highly dispersed ultrafine barium titanate powder by using microbial-derived surfactant. J. Am. Ceram. Soc., 86:12, pp. 2011-2018.
89. Marubashi, K., Yoshiyasu, T., Kakiuchi, T. and Furusawa, K. (2000) Stability of aqueous pigment dispersions with new micobial. Products. J. Soc. Powder Technol., Jpn., 37, pp. 634-638.
90. Yamanishi, R., Okada, K., Tamugi, N., Iwashima, M. and Iguchi, K. (2000) A novel maleic anhydride derivative from the fungus talaromyces sp. No. 10092. Bull. Chem. Soc. Jpn., 73, pp. 2087-2091.
91. Bodour, A. A. and Miller, R. M. (1998) Application of a modified drop-collapse technique for surfactant quantification and screening of biosurfactant-producing microorganisms. J. Microbiol. Meth., 32, pp. 273-280.