Fault diagnosis of rotating machinery

Shock and Vibration Digest

Volumn 30, Issue 1, 1998, Pages 4-13

  Edwards, S ^a   Lees, A W ^a   Friswell, M I ^a  

^a SWANSEA UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

FAILURE ANALYSIS; ROTORS; SHAFTS (MACHINE COMPONENTS); VIBRATION MEASUREMENT;

BOWED SHAFTS; CRACKED SHAFTS;

ROTATING MACHINERY;

EID: 0031649984     PISSN: 05831024     EISSN: None     Source Type: Journal    
DOI: 10.1177/058310249803000102     Document Type: Article

References (69)

1. Bachschmid, N., Diana, G., and Pizzigoni, B., 1984, "The influence of unbalance on cracked rotors," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 193-198.
2. Cempel, C., 1991, "Condition evolution of machinery and its assessment from passive diagnostic experiment," Mech. Sys. Signal Processing 5(4), 317-326.
3. Childs, D. W. and Jordan, L. T., 1997, "Clearance effects on spiral vibrations due to rubbing," Proceedings of the ASME - Design Engineer-ing Technical Conference, DETC97/VIB-4058.
4. Den Hartog, J. P., 1956, Mechanical Vibrations, McGraw-Hill, New York.
5. Ding, J. and Krodkiewski, J. M., 1993, "Inclusion of static indetermination in the mathematical-model for nonlinear dynamic analyses of multibearing rotor system," J. Sound Vibration 164(2), 267-280.
6. Doebling, S. W., Farrar, C. R., Prime, M. B., and Shevitz, D. W., 1996, "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics - A literature review," Los Alamos National Laboratory Report No. LA-13070-MS.
7. Downham, E., 1976, "Vibration in rotating machinery: Malfunction diagnosis - Art and science," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 1-6.
8. Eshleman, R. L., 1984, "Some recent advances in rotor dynamics," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, xi-xx.
9. Flack, R. D., Rooke, J. H., Bielk, J. R., and Gunter, E. J., 1982, "Comparison of the unbalance responses of Jeffcott rotors with shaft bow and shaft runout," J. Mech. Design - Trans. ASME 104, 318-328.
10. Frank, P. M., 1994, "Enhancement of robustness in observer-based fault-detection," Int. J. Control 59(4), 955-981.
11. Frank, P. M. and Köppen-Seliger, B., 1997, "New developments using artificial intelligence in fault diagnosis," Eng. Applications Art. Intell. 10(1), 3-14.
12. Garcia, E. A. and Frank, P. M., 1997, "Deterministic nonlinear observer-based approaches to fault diagnosis: A survey," Control Eng. Practice 5(5), 663-670.
13. Gasch, R., 1976, "Dynamic behaviour of a simple rotor with a cross-secional crack," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 123-128.
14. Gasch, R., 1993, "A survey of the dynamic behavior of a simple rotating shaft with a transverse crack," J. Sound Vibration 160(2), 313-332.
15. Genta, G., 1993, Vibration of Structures and Machines: Practical Aspects, Springer-Verlag, New York.
16. Ghauri, M.K.K., Fox, C.H.J., and Williams, E. J., 1996, "Transient response and contact due to sudden imbalance in a flexible rotor-casing system with support asymmetry," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 383-394.
17. Gnielka, P., 1983, "Modal balancing of flexible rotors without test runs - An experimental investigation," J. Sound Vibration 90(2), 157-172.
18. Göttlich, E. H., 1988, "A method for overall condition monitoring by controlling the efficiency and vibration level of rotating machinery," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 445-447.
19. Halliwell, N. A., 1996, "The laser torsional vibrometer - A step forward in rotating machinery diagnostics," J. Sound Vibration 190(3), 399-418.
20. He, Z. J., Sheng, Y. D., and Qu, L. S., 1990, "Rub failure signature analysis for large rotating machinery," Mech. Sys. Signal Processing 4(5), 417-424.
21. Hill, J. W. and Baines, N. C., 1988, "Application of an expert system to rotating machinery health monitoring," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 449-454.
22. Howell, J., 1994, "Model-based fault-detection in information poor plants," Automatica 30(6), 929-943.
23. Huang, S. C., Huang, Y. M., and Shieh, S. M., 1993, "Vibration and stability of a rotating shaft containing a transverse crack," J. Sound Vibration 162(3), 387-401.
24. Isermann, R., 1984, "Process fault detection based on modeling and estimation methods - A survey," Automatica 20, 387-404.
25. Isermann, R., 1993, "Fault diagnosis of machines via parameter estimation and knowledge processing - Tutorial paper," Automatica 29(4), 815-835.
26. Isermann, R., 1994, "On the applicability of model-based fault-detection for technical processes," Control Eng. Practice 2(3), 439-450.
27. Isermann, R., 1997, "Supervision, fault detection and fault-diagnosis methods - An introduction," Control Eng. Practice 5(5), 639-652.
28. Isermann, R. and Ballé, P., 1997, "Trends in the application of model-based fault detection and diagnosis of technical processes," Control Eng. Practice 5(5), 709-719.
29. Iwatsubo, T, 1976, "Error analysis of vibration of rotor/bearing system," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 87-92.
30. Jun, O. S., Eun, H. J., Earmme, Y. Y., and Lee, C. W., 1992, "Modeling and vibration analysis of a simple rotor with a breathing crack," J. Sound Vibration 155(2), 273-290.
31. Kirk, R. G., 1984, "Insights from applied field balancing of turbomachinery," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 397-407.
32. Krodkiewski, J. M., Ding, J., and Zhang, N., 1994, "Identification of unbalance change using a nonlinear mathematical-model for multi-bearing rotor systems," J. Sound Vibration 169(5), 685-698.
33. Lee, C. W. and Joh, C. Y., 1994, "Development of the use of directional frequency-response functions for the diagnosis of anisotropy and asymmetry in rotating machinery - Theory," Mech. Sys. Signal Processing 8(6), 665-678.
34. Lee, C. W. and Kim, Y. D., 1987, "Modal balancing of flexible rotors during operation - Design and manual operation of balancing head," Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science 201(5), 349-355.
35. Lee, C. W., Joh, Y. D., and Kim, Y. D., 1990, "Automatic modal balancing of flexible rotors during operation - Computer-controlled balancing head," Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science 204(1), 19-28.
36. Lees, A. W. and Friswell, M. I., 1997, "The evaluation of rotor unbalance in flexibly mounted machines," J. Sound Vibration 208(5), 671-683.
37. Leonhardt, S. and Ayoubi, M., 1997, "Methods of fault diagnosis," Control Eng. Practice 5(5), 683-692.
38. Loukis, E., Mathioudakis, K., and Papailiou, K., 1994, "Optimizing automated gas-turbine fault-detection using statistical pattern-recognition," J. Eng. Gas Turbines Power-Trans. ASME 116(1), 165-171.
39. Mayes, I. W. and Davies, W. G., 1976, "The vibrational behaviour of a rotating shaft system containing a transverse crack," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 53-64.
40. McFadden, P. D. and Smith, J. D., 1984, "Model for the vibration produced by a single defect in a rolling element bearing," J. Sound Vibration 96, 69-92.
41. Meacham, W. L., Talbert, P. B., Nelson, H. D., and Cooperrider, N. K., 1988, "Complex modal balancing of flexible rotors including residual bow," J. Propulsion Power 4(3), 245-251.
42. Meng, G. and Hahn, E. J., 1997, "Dynamic response of a cracked rotor with some comments on crack detection," J. Eng. Gas Turbines Power-Trans. ASME 119(2), 447-455.
43. Morton, P. G., 1985, "Modal balancing of flexible shafts without trial weights," Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science 199(1), 71-78.
44. Natke, H. G. and Cempel, C., 1991, "Fault detection and localisation in structures: A discussion," Mech. Sys. Signal Processing 5(5), 345-356.
45. Neale, M. J., 1995, The Tribology Handbook, Butterworth-Heinemann, London.
46. Nelson, H. D. and Nataraj, C., 1986, "The dynamics of a rotor system with a cracked shaft," J. Vibration Acoustics Stress and Reliability in Design-Trans. ASME 108(2), 189-196.
47. Nicholas, J. C., Gunter, E. J., and Allaire, P. J., 1976a, "Effect of residual shaft bow on unbalance response and balancing of a single mass flexible rotor Part 1 - Unbalance response," J. Eng. Power 98,171-181.
48. Nicholas, J. C., Gunter, E. J., and Allaire, P. E., 1976b, "Effect of residual shaft bow on unbalance response and balancing of a single mass flexible rotor Part 2 - Balancing," J. Eng. Power 98, 182-189.
49. Parkinson, A. G., 1991, "Balancing of rotating machinery," Proceedings of the Institution of Mechanical Engineers Part C - Mechanical Engineering Science 205, 53-66.
50. Parkinson, A. G., Darlow, M. S., and Smalley, A. J., 1984, "Balancing flexible rotating shafts with an initial bend," AIAA Journal 22(5), 683-689.
51. Patton, R. J. and Chen, J., 1997, "Observer-based fault detection and isolation: Robustness and applications," Control Eng. Practice 5(5), 671-682.
52. Patton, R. J., Frank, P. M., and Clark, R. N., 1989, Fault Diagnosis in Dynamic Systems/Theory and Application, Prentice Hall International, London.
53. Salamone, D. and Gunter, E. J., 1977, "Synchronous unbalance of a multimass flexible rotor considering shaft warp and disk skew," M.Sc. thesis No. UVA/464761/ME77/142, University of Virginia, Charlottesville.
54. Salamone, D. J. and Gunter, E. J., 1980, "Synchronous unbalance response of an overhung rotor with disk skew," J. Eng. Power 102, 749-755.
55. Schmied, J. and Krämer, E., 1984, "Vlbrational behaviour of a rotor with a cross-sectional crack," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 183-192.
56. Seibold, S. and Weinert, K., 1996, "A time domain method for the localization of cracks in rotors," J. Sound Vibration 195(1), 57-73.
57. Sekhar, A. S. and Prabhu, B. S., 1995, "Effects of coupling misalignment on vibrations of rotating machinery," J. Sound Vibration 185(4), 655-671.
58. Smalley, A. J., Baldwin, R. M., Mauney, D. A., and Millwater, H. R., 1996, "Towards risk based criteria for rotor vibration," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 517-527.
59. Smith, D. M., 1980, "Recognition of the causes of rotor vibration in turbomachinery," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 1-4.
60. Srinivasan, A. and Batur, C., 1994, "Fault-detection and isolation in an unsupervised learning-environment," Pattern Recognition Lett. 15(3), 235-242.
61. Stewart, R. M., 1976, "Vibration analysis as an aid to the detection and diagnosis of faults in rotating machinery," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 223-229.
62. Su, Y. T. and Lin, S. J., 1992, "On initial fault-detection of a tapered roller bearing - Frequency-domain analysis," J. Sound Vibration 155(1), 75-84.
63. Tan, S. G. and Wang, X. X., 1993, "A theoretical introduction to low-speed balancing of flexible rotors - Unification and development of the modal balancing and influence coefficient techniques," J. Sound Vibration 168(3), 385-394.
64. Taylor, J. I., 1995, "Back to the basics of rotating machinery vibration analysis," Sound and Vibration 29(2), 12-16.
65. Thomas, D. L., 1984, "Vibration monitoring strategy for large turbogenerators," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 91-99.
66. Tondl, A., 1965, Some Problems of Rotor Dynamics, Chapman and Hall, London.
67. Wang, X. F. and McFadden, P. D., 1996, "Simulation models for bearing vibration generation and fault detection via neural networks," Proceedings of the Institution of Mechanical Engineers - Vibrations in Rotating Machinery, 441-450.
68. Wauer, J., 1990, "On the dynamics of cracked rotors: A literature survey," Applied Mech. Reviews 43(1), 13-17.
69. Willsky, A. S., 1976, "A survey of design methods for failure detection in dynamic systems," Automatica 12, 601-611.