Cumulative ductility spectra for seismic design of ductile structures subjected to long duration motions: Concept and theoretical background

Journal of Earthquake Engineering

Volumn 12, Issue 1, 2008, Pages 152-172

  Teran Gilmore, Amador ^a,c   Bahena Arredondo, Nadyne ^b  

^a UNIVERSIDAD AUTÓNOMA METROPOLITANA AZCAPOTZALCO   (Mexico)

^b Alonso y Asociados   (Mexico)

^c UNIVERSIDAD AUTÓNOMA METROPOLITANA   (Mexico)

Author keywords

Constant cumulative ductility spectra; Damage index; Low cycle fatigue; Plastic energy; Strength reduction factor

Indexed keywords

DAMAGE DETECTION; MATHEMATICAL MODELS; PLASTIC DEFORMATION; SEISMIC DESIGN; SEISMIC RESPONSE; SPECTRUM ANALYSIS;

DAMAGE INDEX; PLASTIC ENERGY;

DUCTILITY;

EID: 38349183091     PISSN: 13632469     EISSN: None     Source Type: Journal    
DOI: 10.1080/13632460701364486     Document Type: Article

References (39)

1. Akiyama, H. and Takahashi, M. [1992] "Response of reinforced concrete moment frames to strong earthquake ground motions," Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, Krawinkler, H. and Fajfar, P. eds. Elsevier Applied Science: Bled, Slovenia, 105-114.
2. Arroyo, D. and Teran-Gilmore, A. [2003] "Strength reduction factors for ductile structures with passive energy dissipating devices," Journal of Earthquake Engineering 7(2), 297-325.
3. Arroyo, D. and Ordaz, M. [2006] "Demandas de energía plástica disipada en sistemas de un grado de libertad ubicados en suelos blandos," XV Mexican Conference on Earthquake Engineering (CD), Paper V-02.
4. Bertero, V. V. and Popov, E. P. [1977] "Seismic behavior of ductile moment-resisting reinforced concrete frames," Reinforced Concrete Structures in Seismic Zone, ACISP-53, Detroit, U.S., 247-291.
5. Bertero, R. D. and Bertero, V. V. [1992] 'Tall reinforced concrete buildings: conceptual earthquake-resistant design methodology," Report No.UCB/EERC-92/16, University of California at Berkeley.
6. Bertero, V. V. [1997] "Performance-based seismic engineering: A critical review of proposed guidelines," Seismic Design Methodologies for the Next Generation of Codes, Bled, Slovenia, 1-31.
7. Bojorquez, E. and Ruiz S. E. [2004] "Strength reduction factors for the valley of Mexico taking into account low cycle fatigue effects," XIII World Conference on Earthquake Engineering, Paper 516.
8. Chai, Y. H, Fajfar, P. and Romstad, K. M. [1998] "Formulation of duration-dependent inelastic seismic design spectrum," ASCE Journal of Structural Engineering 124(8), 913-921.
9. Chai, Y. H. [2004] "Incorporating low-cycle fatigue model into duration-dependent inelastic design spectra," Earthquake Engineering and Structural Dynamics 34, 83-96.
10. Chou, C. C. and Uang, C. M. [2000] "Establishing absorbed energy spectra-an attenuation approach," Earthquake Engineering and Structural Dynamics 29, 1441-1455.
11. Cosenza, E., Manfredi, G. and Ramasco, R. [1993] "The use of damage functionals in earthquake engineering: a comparison between different methods," Earthquake Engineering and Structural Dynamics 22, 855-868.
12. Cosenza, E. and Manfredi, G. [1996] "Seismic design based on low cycle fatigue criteria," XI World Conference on Earthquake Engineering (CD), Acapulco, Mexico.
13. Darwin, D. and Nmai, C. K. [1985] "Energy dissipation in RC beams under cyclic loading," ASCE Journal of Structural Engineering 112 (8), 1829-1846.
14. Decanini, L. D. and Mollaioli, F. [2001] "An energy-based methodology for the assessment of seismic demand," Soil Dynamics and Earthquake Engineering 21, 113-137.
15. Fajfar, P. [1992] "Equivalent ductility factors taking into account low-cycle fatigue," Earthquake Engineering and Structural Dynamics 21, 837-848.
16. Gosain, N. K., Brown, R. H. and Jirsa, J. O. [1977] "Shear requirements for load reversals on RC members," ASCE Journal of Structural Engineering 103 (ST7), 1461-1476.
17. Housner, G. W. [1956] "Limit design of structures to resist earthquakes," First World Conference on Earthquake Engineering 5-1 to 5-13.
18. Huerta-Garnica, B. and Reinoso-Angulo, E. [2002] "Espectros de energía de movimientos fuertes registrados en México," Revista de Ingeniería Sísmica 66, 45-72.
19. Krawinkler, H. and Nassar, A. [1992] "Seismic design based on ductility and cumulative damage demands and capacities," Nonlinear Seismic Analysis and Design of Reinforced Concrete Buildings, Krawinkler, H. and Fajfar, P. eds., Elsevier Applied Science: Bled, Slovenia, 95-104.
20. Kuwamura, H. and Galambos, T. V. [1989] "Earthquake load for structural reliability," ASCE Journal of Structural Engineering 115(6), 1446-1463.
21. Ordaz, M. and Perez, E. [1998] "Estimation of strength reduction factors for elastoplastic systems: a new approach," Earthquake Engineering and Structural Dynamics 27, 889-901.
22. Park, Y. J. and Ang, A. H. [1985] "Mechanistic seismic damage model for reinforced concrete," ASCE Journal of Structural Engineering 111(ST4), 740-757.
23. Panagiotakos, T. B. and Fardis, M. N. [2001] "Deformations of reinforced concrete members at yielding and ultimate," ACI Structural Journal 98(2), 135-148.
24. Powell, G. H. and Allahabadi, R. [1987] "Seismic damage prediction by deterministic methods: concepts and procedures," Earthquake Engineering and Structural Dynamics 16, 719-734.
25. Rodriguez, M. E. and Aristizabal, J. C. [1999] "Evaluation of a seismic damage parameter," Earthquake Engineering and Structural Dynamics 28, 463-477.
26. Scribner, C. F. and Wight, J. K. [1980] "Strength decay in R/C beams under load reversals," ASCE Journal of Structural Engineering 106 (ST4), 861-876.
27. Seed, H. B. and Sun, J. I. [1989], "Implications of site effects in the Mexico City Earthquake of Sept. 19, 1985 for earthquake-resistant design criteria in the San Francisco Bay Area of California," Report No.UCB/EERC-89/03, University of California at Berkeley.
28. Somerville, P. G., Smith, N., Punyamurthula, S., and Sun, J. [1997] "Development of ground motion time histories for phase 2 of the FEMA/SAC Steel Project," Report SAC/BD-97/04, SAC Joint Venture.
29. Silva-Olivera, H. and Lopez-Batiz, O. [2001] "Estudio experimental sobre índices de daño en estructuras de concreto reforzado sujetas a cargas laterales," XIII Mexican Conference on Earthquake Engineering (CD).
30. Stephens, J. E. and Yao, J. T. P. [1987], "Damage assessment using response measurements," ASCE Journal of Structural Engineering 113(4), 787-801.
31. Teran-Gilmore, A. [1996] "Performance-based earthquake-resistant design of framed buildings using energy concepts," Ph. D. Thesis, University of California at Berkeley.
32. Teran-Gilmore, A. [1998] "Características mecánicas y desempeño sísmico de marcos dúctiles de concreto reforzado," XI Mexican Conference on Earthquake Engineering 1, 564-573.
33. Teran-Gilmore, A., Avila, E., and Rangel, G. [2003] "On the use of plastic energy to establish strength requirements in ductile structures," Engineering Structures 25, 965-980.
34. Teran-Gilmore, A. and Jirsa, J. O. [2005] "A simple damage model for practical seismic design that accounts for low cycle fatigue," Earthquake Spectra 21(3), 803-832.
35. Teran-Gilmore A. and Jirsa J. O. [2007] "Energy demands for seismic design against low cycle fatigue," Earthquake Engineering and Structural Dynamics, 36(3), 383-404.
36. Uang, C. M. and Bertero, V. V. [1990] "Evaluation of seismic energy in structures," Earthquake Engineering and Structural Dynamics 19, 77-90.
37. Trifunac, M. D. and Brady, A. G. [1975], "A study on the duration of strong earthquake ground motion," Bulletin of the Seimological Society of America 65(3), 581-626.
38. Williams, M. S. and Sexsmith, R. G. [1997] "Seismic assessment of concrete bridges using inelastic damage analysis," Engineering Structures 19(3), 208-216.
39. Zahrah, T. F. and Hall, W. J. [1984] "Earthquake energy absorption in SDOF structures," ASCE Journal of Structural Engineering 110(8), 1757-1772.