Rheology and processability of multi-walled carbon nanotubes-ABSE polycarbosilazane composites

Journal of the European Ceramic Society

Volumn 28, Issue 5, 2008, Pages 1015-1021

  Kokott, Sylvia ^a   Heymann, Lutz ^b   Motz, Günter ^a  

^a UNIVERSITY OF BAYREUTH   (Germany)

^b Department of Applied Mechanics and Fluid Dynamics ^*  (Germany)

Author keywords

Carbon nanotube; Ceramic fibres; Rheology; SiCN precursor

Indexed keywords

CURING; DISPERSIONS; MELT SPINNING; MULTIWALLED CARBON NANOTUBES (MWCN); PYROLYSIS; RHEOLOGY; SPINNING (FIBERS); SYNTHESIS (CHEMICAL); VISCOELASTICITY;

POLYCARBOSILAZANE; SPINNING MASS;

CERAMIC FIBERS;

CERAMIC FIBERS; CURING; DISPERSIONS; MELT SPINNING; MULTIWALLED CARBON NANOTUBES (MWCN); PYROLYSIS; RHEOLOGY; SPINNING (FIBERS); SYNTHESIS (CHEMICAL); VISCOELASTICITY;

EID: 38149078040     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.09.035     Document Type: Article

References (30)

1. Sandler J.K.W., Pegel S., Cadek M., Gojny F., van Es M., Lomar J., et al. A comparative study of melt spun polyamide-12 fibres reinforced with carbon nanotubes and nanofibers. Polymer 45 (2004) 2001-2015
2. Iijima S. Helocal microtubules of graphitic carbon. Nature 345 (1991) 56
3. 60 in low density solutions. Carbon 40 (2002) 271-276
4. Lozano K., Bonilla-Rios J., and Barrera E.V. A study in nanofibre-reinforced thermoplastic composites (II): investigation of the mixing rheology and conduction properties. J. Appl. Polym. Sci. 80 (2001) 1162-1172
5. Pötschke P., Fornes T.D., and Paul D.R. Rheological behavior of multiwalled carbon nanotubes/polycarbonate composites. Polymer 43 (2002) 3247-3255
6. Schawaller, D., Untersuchungen zur Herstellung keramischer Fasern im System Si-B-C-N und Si-C-N. Dissertation. Institut für Chemiefasern der Deutschen Institute für Textil-und Faserforschung, Stuttgart, 2003.
7. Hacker, J., Entwicklung einer preiswerten keramischen Fasern für den Anwendungsbereich bis 1400 Grad Celsius auf der Basis eines spinnfähigen siliciumorganischen polymers. Dissertation. Universität Bayreuth, 2004.
8. Suttor D., Hacker J., Traßl S., Kleebe H.-J., and Ziegler G. Polymer architecture and crystallization behavior of Si-C-N-fiber precursors. Ceram. Eng. Sci. Proc. 18 3 (1997) 127-131
9. Hacker J., Motz G., and Ziegler G. Synthesis and characterisation of novel preceramic polymers for SiCN-fibres. Br. Ceram. Proc. 60 2 (1999) 391-392
10. Hacker, J., Motz, G. and Ziegler, G., Neuartige SiCN-Polymere als Vorstufen für keramische Fasern. Proc. Tagung Verbundwerkstoffe und Werkstoffverbunde, In K. Schulte und K.U. Kainer, Hrsg. Hamburg, 5-7 Oktober 1999, pp. 459-463.
11. Motz G., Hacker J., and Ziegler G. Special modified silazanes for coatings, fibers and CMC's. Ceram. Eng. Sci. Proc. 21 4 (2000) 307-314
12. Hacker J., Motz G., and Ziegler G. Processing of SICN-fibres prepared from polycarbosilazanes. Proceedings of the seventh International Symposium Ceramic Materials Components for Engines. Gosslar, June 19-21 (2000) 653-656
13. Hacker J., Motz G., Schawaller D., Clauß B., and Ziegler G. Development of SICN-fibres from novel preceramic polymers. Proceedings Materials Week, München, 25-28 September (2000). http://www.Materialsweek.org/proceedings/index.htm
14. Hacker J., Motz G., and Ziegler G. Novel ceramic SiCN-fibers from the polysilazane ABSE. In: Krenkel W., Naslain R., and Schneider H. (Eds). Proceedings of the High Temperature Ceramic Matrix Composites (2001), Wiley-VCH 52-55
15. Motz G., Hacker J., and Ziegler G. New SiCN-fibers from the ABSE polycarbosilazane. Ceram. Eng. Sci. Proc. 23 3 (2002) 255-260
16. Fourné F. Synthetische Fasern-Herstellung, Maschinen und Apparate, Eigenschaften Handbuch für Anlagenplanung, Maschinenkonstruktion und Betrieb (1995), Carl Hanser Verlag, München Wien
17. Salem D.R. Structure Formation in Polymeric Fibers (2001), Carl Hanser Verlag, München
18. Shah S.R., and Raj R. Nanodevices that explore the synergies between PDCs and carbon nanotubes. J. Eur. Ceram. Soc. 25 (2005) 243-249
19. Yu M., Lourie O., Dyer M.J., Kelly T.F., and Ruoff R.S. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 287 (2000) 637-640
20. Connelly R.W., and Greener J. High -shear viscometry with a rotational parallel-disk device. J. Rheol. 29 (1985) 209-226
21. -1 using a parallel plate rheometer. Polym. Eng. Sci. 27 (1987) 598-602
22. Mackay M.E., and Cathey C.A. A device to measure the dynamic shear properties of small samples. J. Rheol. 35 (1991) 237-256
23. Heymann L., Peukert S., and Aksel N. Investigation of the solid-liquid transition of highly concentrated suspensions in oscillatory amplitude sweeps. J. Rheol. 46 (2002) 93-112
24. Macosko C.W. Rheology-Principles, Measurements, and Applications (1994), VCH Publishers, Inc., New York
25. Lin Y., Taylor S., Li H., Fernando S.K.A., Qu L., Wang W., et al. Advances towards bioapplications of carbon nanotubes. J. Mater. Chem. 14 (2004) 527-541
26. Safety data sheet according to EC directive 91/155/EWG, Disperbyk-2070, version 1.1 revised in 07.06.2004.
27. Andrews R., Jacques D., Qian D.L., and Rantell T. Multiwall carbon nanotubes: synthesis and application. Acc. Chem. Res. 35 (2002) 1008-1017
28. Haggenmueller R., Gommans H.H., Rinzler A.G., Fischer J.E., and Winey K.I. Aligned single-wall carbon nanotubes in composites by melt processing methods. Chem. Phys. Lett. 330 (2000) 219-225
29. Kearns J.C., and Shambaugh R.L. Polypropylene fibers reinforced with carbon nanotubes. J. Appl. Polym. Sci. 86 (2002) 2079-2084
30. Moore E.M., Ortiz D.L., Marla V.T., Shambaugh R.L., and Grady B.P. Enhancing the strength of polypropylene fibers with carbon Nanotubes. J. Appl. Polym. Sci. 93 6 (2004) 2926-2933