Review of mixed lubrication in concentrated contacts: Thinning, mixed and partial films, classical, modern and future modes

International Journal for Engineering Modelling

Volumn 18, Issue 3-4, 2005, Pages 87-129

  Zhang, Yongbin ^a  

^a Hangzhou Gear Box Company ^*  (China)

Author keywords

Concentrated contacts; Elastohydrodynamic lubrication; Lubrication modes; Mixed films; Mixed lubrication; Partial films; Thinning

Indexed keywords

CONTACTS (FLUID MECHANICS); LIQUID FILMS; MATHEMATICAL MODELS; NON NEWTONIAN LIQUIDS; SURFACE ROUGHNESS; VISCOELASTICITY; VISCOPLASTICITY;

HERTZIAN ZONE; MIXED FILMS; MIXED LUBRICATION; OXIDIZED CHEMICAL BOUNDARY LAYER LUBRICATION; PARTIAL FILMS; THINNING;

ELASTOHYDRODYNAMIC LUBRICATION;

CONTACTS (FLUID MECHANICS); ELASTOHYDRODYNAMIC LUBRICATION; LIQUID FILMS; MATHEMATICAL MODELS; NON NEWTONIAN LIQUIDS; SURFACE ROUGHNESS; VISCOELASTICITY; VISCOPLASTICITY;

EID: 37549027278     PISSN: 13301365     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (54)

1. D. Dowson and G.R. Higginson, Elastohydrodynamic Lubrication, Pergamon Press, New York, 1996.
2. H. Christensen, Stochastic models for hydrodynamic lubrication of rough surfaces, Proc. Instn. Mech. Engrs., Vol. 184, p. 1013, 1969-1970.
3. N. Patir and H.S. Cheng, Application of average flow model to lubrication between rough sliding surfaces, ASME Jour. Lubri. Tech., Vol. 101, pp. 220-230, 1979.
4. G.D. Hughes and A.W. Bush, An average Reynolds equation for non-Newtonian fluids in EHL line contacts, ASME Jour. Trib., Vol. 115, pp. 666-669, 1993.
5. P.R. Goglia, T.F. Conry and C. Cusano, The effects of surface irregularities on the elastohydrodynamic lubrication of sliding line contacts: Part I-single irregularities, ASME Jour. Trib., Vol. 106, pp. 104-112, 1984.
6. A.A. Lubrecht, W.E. Napel and R. Bosma, The influence of longitudinal and transverse roughness on the elastohydrodynamic lubrication of circular contacts, ASME Jour. Trib., Vol. 110, pp. 421-426, 1988.
7. J.A. Greenwood and K.L. Johnson, The behavior of transverse roughness in sliding elastohydrodynamically lubricated contacts, Wear, Vol. 153, pp. 107-117, 1992.
8. L. Chang and W. Zhao, Fundamental differences between Newtonian and non-Newtonian micro-EHL results, ASME Jour Trib., Vol. 117, pp. 29-35, 1995.
9. L. Chang, C. Cusano and T.F. Conry, Effects of lubricant rheology and kinematic conditions on micro-elastohydrodynamic lubrication, ASME Jour. Trib., Vol. 111, pp. 344-351, 1989.
10. L. Chang, A. Jackson and M.N. Webster, Effects of 3-D surface topography on the EHL film thickness and film breakdown, Trib. Trans., Vol, 37, pp. 435-444, 1994.
11. K.L. Johnson and J.G. Higginson, A non-Newtonian effect of sliding in micro-EHL, Wear, Vol. 128, pp. 249-264, 1988.
12. Y. Zhang, Contact surface irregularity and contact-fluid interfacial slip effects in elastohydrodynamic lubrication, Jour. Bal. Trib. Assoc., Vol. 10, No. 3, pp. 368-382, 2004.
13. C.H. Venner and W.E. Napel, Surface roughness effects in an EHL line contact, ASME Jour. Trib., Vol. 114, pp. 616-622, 1992.
14. H. Christensen, Failure by collapse of hydrodynamic oil films, Wear, Vol. 22, pp. 359-366, 1972.
15. Y. Zhang, Contact-fluid interfacial limiting shear stress effect in thermal elastohydrodynamic lubrication: Part I-Theory, Jour. Bal. Trib. Assoc., Vol. 11, No. 1, pp. 102-123, 2005.
16. Y. Zhang, Contact-fluid interfacial limiting shear stress effect in thermal elastohydrodynamic lubrication: Part II-Film collapse and failure, Jour. Bal. Trib. Assoc., Vol. 11, No. 1, pp. 124-134, 2005.
17. H. Czichos and K. Kirschke, Investigations into film failure (transition point) of lubricated concentrated contacts, Wear, Vol. 22, pp. 321-336, 1972.
18. A. Begelinger and A.W.J. Gee de, Thin film lubrication of sliding point contacts of AISI 52100 steel, Wear, Vol. 28, pp. 103-114, 1974.
19. A. Begelinger and A.W.J. Gee de, On the mechanism of lubricant film failure in sliding concentrated steel contacts, ASME Jour. Lubri. Tech., Vol. 98, pp. 575-579, 1976.
20. B.J. Tabor, Failure of thin film lubrication-An expedient for the characterization of lubricants, ASME Jour. Lubri. Tech., Vol. 103, pp. 497-501, 1981.
21. Y. Zhang, Mixed rheologies in elastohydrodynamic lubrication, Industrial Lubrication and Tribology, Vol. 56, pp. 88-106, 2004.
22. Y. Zhang, A justification of the load-carrying capacity of elastohydrodynamic lubrication film based on the Newtonian fluid model, Industrial Lubrication and Tribology, Vol. 57, No. 6, 2005.
23. Y. Zhang et al., An analysis of elastohydrodynamic lubrication with limiting shear stress: Part I-Theory and solutions, Trib. Trans., Vol. 45, pp. 135-144, 2002.
24. Y. Zhang et al., An analysis of elastohydrodynamic lubrication with limiting shear stress: Part II-Load influence, Trib. Trans., Vol. 45, pp. 211-216, 2002.
25. Y. Zhang et al., EHL film thickness limitation theory under a limiting shear stress, Trib. Trans., Vol. 45, pp. 531-539, 2002.
26. Y. Zhang et al., A lubrication deviation from the classical EHL theory by the lubricant viscoplasticity: Part II-Boundary of lubrication regimes, Trib. Trans., Vol. 44, pp. 305-309, 2001.
27. Y. Zhang and G.S. Lu, Flow factor for molecularly thin fluid films in one-dimensional flow due to the fluid discontinuity, Journal of Molecular Liquids, Vol. 116, No. 1, pp. 43-50, 2005.
28. Y. Zhang, K. Tang, and G.S. Lu, Flow factor of non continuum fluids in one-dimensional contact, Industrial Lubrication and Tribology, Vol. 58, No. 3, pp. 151-169, 2006.
29. Y. Zhang, Modelling of molecularly thin film elastohydrodynamic lubrication, Jour. Bal. Trib. Assoc., Vol. 10, No. 3, pp. 394-421, 2004.
30. Y. Zhang, K. Tang, and G.S. Lu, Model of elastohydrodynamic lubrication with molecularly thin lubricating films: Part I- Development of analysis, Int. Jour. Fluid Mech. Res., Vol. 30, No. 5, pp. 542-557, 2003.
31. Y. Zhang and G.S. Lu, Model of elastohydrodynamic lubrication with molecularly thin lubricating films: Part II-Results for an exemplary lubrication, Int. Jour. Fluid Mech. Res., Vol. 30, No. 5, pp. 558-571, 2003.
32. J.A. Greenwood and J.J. Kauzlarich, Elastohydrodynamic film thickness for shear-thinning lubricants, Proc. Instn. Mech. Engrs., Vol. 212, pp. 179-191, 1998.
33. X. Jiang, D.Y. Hua, H.S. Cheng, X. Ai and S.C. Lee, Mixed elastohydrodynamic lubrication model with asperity contact, ASME Jour. Trib., Vol. 121, pp. 481-491, 1999.
34. A.N. Grubin, Fundamentals of the hydrodynamic theory of lubrication of heavily loaded cylindrical surfaces, Central Scientific Research Institute for Technology and Mechanical Engineering, 30, Moscow, Kh. F. Ketova (ed.), D. S. I. R. London Translations, Vol. 337, pp. 115-166, 1949.
35. B.J. Hamrock and D. Dowson, Ball Bearing Lubrication, John Wiley&Sons, 1981.
36. J.W. Kannel and J.C. Bell, Interpretations of the thickness of lubricant films in rolling contact: Part I-Examination of measurements obtained by X-rays, ASME Jour. Lubri. Tech., Vol. 93, pp. 478-484, 1971.
37. D. Lee, D.M. Sanborn and W.O. Winer, Some observations of the relationship between film thickness and load in high Hertz pressure sliding elastohydrodynamic contacts, ASME Jour. Lubri. Tech., Vol. 95, pp. 386-390, 1973.
38. J.J. Coy and E.V. Zaretsky, Some limitations in applying classical EHD film thickness formulas to a high speed bearing, ASME Jour. Lubri. Tech., Vol. 103, p. 295, 1981.
39. H.S. Hsiao and B.J. Hamrock, A complete solution for thermal elastohydrodynamic lubrication of line contacts, using circular non-Newtonian fluid model, ASME Jour. Trib., Vol. 114, pp. 540-552, 1992.
40. C. Cioc, S. Cioc, L. Moraru, A. Kahraman and T.G. Keith, A deterministic elastohydrodynamic lubrication model of high-speed rotorcraft transmission components, Trib. Trans., Vol. 45, pp. 556-562, 2002.
41. W. Hirst and A.J. Moore, Non-Newtonian behavior in EHL, In Proc. Roy. Soc. Lond., Vol. 337, pp. 101-121, 1974.
42. K.L. Johnson and J.L. Tavaarwerk, Shear behavior of elastohydrodynamic oil films, In Proc. Roy. Soc. Lond., Vol. 356, pp. 215-236, 977.
43. S. Bair and W.O. Winer, Arheological model for elastohydrodynamic contacts based on primary laboratory data, ASME Jour. Lubri. Tech., Vol. 101, pp. 258-265, 1979.
44. T.F. Conry, S. Wang and C.A. Cusano, Reynolds-Eyring equation for elastohydrodynamic lubrication in line contacts, ASME Jour. Trib., Vol. 109, pp. 648-658, 1987.
45. Y. Zhang et al., A lubrication deviation from the classical EHL theory by the lubricant viscoplasticity: Part I-Film thickness dependence, Trib. Trans., Vol. 44, pp. 224-232, 2001.
46. Y. Zhang et al., EHL performance of the the lubricant with shear strength: Part I-Boundary slippge and film failure, Trib. Trans., Vol. 43, pp. 700-710,2000.
47. H.P. Evans and R.W. Snidle, A model for elastohydrodynamic film failure in contacts between rough surfaces having transverse finish, ASME Jour. Trib., Vol. 118, pp. 847-857, 1996.
48. H.S. Cheng and B. Sternlicht, A numerical solution for the pressure, temperature, and film thickness between two infinitely long, lubricated rolling and sliding cylinders under heavy loads, ASME Jour. Basic Eng., pp. 695-707, 1965.
49. L. Rozeanu and L. Snarsky, Effect of solid surface lubricant interaction on the load carrying capacity of sliding bearings, ASME Jour. Lubri. Tech., Vol. 100, pp. 167-175, 1978.
50. Y. Zhang et al., About the load-carrying capacity of elastohydrodynamic lubrication film, Trib. Trans., Vol. 44, pp. 1-10, 2001.
51. L. Rozeanu and N. Tipei, Slippage phenomena at the interface between the adsorbed layer and the bulk of the lubricant: Theory and experiment, Wear, Vol. 64, pp. 245-257, 1980.
52. M. Kaneta, H. Nishikawa and K. Kameishi, Observation of wall slip in elastohydrodynamic lubrication, ASME Jour. Trib., Vol. 112, pp. 447-452, 1990.
53. M. Kaneta et al., Abnormal phenomena appearing in EHL contacts, ASME Jour. Trib., Vol. 118, pp. 886-892, 1996.
54. P. Ehret, D. Dowon and C.M. Taylor, On lubricant transport conditions in elasto-hydrodynamic conjunctions, In Proc. Roy. Soc. Lond., Vol. A454, pp. 763-787, 1998.