A systematic study of the validation of Oliver and Pharr's method

Journal of Materials Research

Volumn 22, Issue 12, 2007, Pages 3385-3396

  Shu, Siqi ^a   Lu, Jian ^a   Li, Dongfeng ^a  

^a HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTIC MODULI; ELASTICITY; ERROR ANALYSIS; ERROR CORRECTION; PLASTICITY; STRAIN HARDENING; YIELD STRESS;

INDENTED MATERIALS; LOAD-DEPTH CURVES; OLIVER AND PHARR'S METHOD;

MATERIALS TESTING;

EID: 37549018040     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2007.0428     Document Type: Article

References (46)

1. D. Tabor: Hardness of Metal (Clarendon Press, Oxford, 1951).
2. K.L. Johnson: Contact Mechanics (Cambridge University Press, Cambridge, 1985).
3. Y.T. Cheng and C.M. Cheng: Scaling relationships in conical indentation of elastic-perfectly plastic solids. Int. J. Solids Struct. 36, 1231 (1997).
4. Y.T. Cheng and C.M. Cheng: Relationships between hardness, elastic modulus, and the work of indentation. Appl. Phys. Lett. 73, 614 (1998).
5. Y.T. Cheng and C.M. Cheng: Scaling relationships in conical indentation of elastic-perfectly plastic solids. Int. J. Solids Struct. 36, 1231 (1998).
6. Y.T. Cheng and C.M. Cheng: Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng., R 44, 91 (2004).
7. Y.P. Cao, X.Q. Qian, and J. Lu: On the determination of reduced Young's modulus and hardness of elastoplastic materials using a single sharp indenter. J. Mater. Res. 21, 215 (2006).
8. M.F. Doerner and W.D. Nix: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).
9. W.C. Oliver and G.M. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
10. J.L. Loubet, J.M. Georges, O. Marchesini, and G. Meille: Vickers indentation curves of magnesium-oxide (MGO). Tribology 106, 43 (1984).
11. W.C. Oliver and G.M. Pharr: Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J. Mater. Res. 19, 3 (2004).
12. A. Bolshakov and G.M. Pharr: Influences of pile up on the measurement of mechanical properties by load and depth-sensing indentation techniques. J. Mater. Res. 13, 1049 (1998).
13. V. Gorokhovsky, C. Bowman, P. Gannon, D. VanVorous, A.A. Voevodin, A. Rutkowski, C. Muratore, R.J. Smith, A. Kayani, D. Gelles, V. Shutthanandan, and B.G. Trusov: Tribological performance of hybrid filtered arc-magnetron coatings, Part 1: Coating deposition process and basic coating basic coating properties characterization. Surf. Coat. Technol. 201, 3732 (2006).
14. ISI: http://portal.isiknowledge.com (2007).
15. D.J. Ma, T.H. Zhang, and C.W. Ong: Evaluation of the effectiveness of representative method for determining Young's modulus and hardness from instrumented indentation data. J. Mater. Res. 21, 225 (2006).
16. C. Aksel and F.L. Riley: Young's modulus measurements of magnesia-spinel composites using load-deflection curves, sonic modulus, strain gauges and Rayleigh waves. J. Eur. Ceram. Soc. 23, 3089 (2003).
17. G. Aldrich-Smith, N.M. Jennett, and U. Hangen: Direct measurement of nanoindentation area function by metrological AFM. Z. Metallkd. 96, 1267 (2005).
18. M.F. Ashby: Materials Selection in Mechanical Design, 3rd ed. (Pergamon Press, Oxford, 1985).
19. R.B. King: Elastic analysis of some punch problems for a layered medium. Int. J. Solids Struct. 23, 1657 (1987).
20. J.J. Vlassak and W.D. Nix: Measuring the elastic properties of anisotropic materials by means of indentation experiments. J, Mech. Phys. Solids 42, 1223 (1994).
21. J.C. Hay, A. Bolshakov, and M.M. Pharr: A critical examination of the fundamental relations used in the analysis of nanoindentation data. J. Mater. Res. 14, 2296 (1999).
22. Y.P. Cao, M. Dao, and J. Lu: A precise correction method for the study the superhard materials using the nanoindentation. J. Mater. Res. 22, 1255 (2007).
23. K.K. Tho, S. Swaddiwudhipong, Z.S. Liu, and J. Hua: Artificial neural network model for material characterization by indentation. Modell. Simul. Mater. Sci. Eng. 12, 1055 (2004).
24. Y.G. Wei, S.Q. Shu, Y. Du, and C. Zhu: Size geometry and nonuniformity effects of surface-nanocrystalline aluminum in nanoindentation test. Int. J. Plast. 11, 2089 (2005).
25. M. Mata and J. Alcala: The role of friction on sharp indentation. J. Mech. Phys. Solids 52, 145 (2004).
26. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modelling of the forward and reverse problems in instrumented sharp Indentation. Acta Mater. 49, 3899 (2001).
27. K.K. Tho, S. Swaddiwudhipong, Z.S. Liu, K. Zeng, and J. Hua: Uniqueness of reverse analysis from conical indentation tests. J Mater. Res. 19, 2498 (2004).
28. J. Alkorta, J.M. Martinez-Esnaola, and J. Gil Sevillana: Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data. J. Mater. Res. 20, 432 (2005).
29. A.C. Fischer-Cripps: Nonoindentation, 2nd ed. (Springer Press, New York, 2004).
30. ABAQUS: Theory Manual Version 6.2 (Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI, 2006).
31. S. Jayaraman, G.T. Hahn, W.C. Oliver, and P.C. Bastias: Determination of monotonic stress-strain curve of hard materials from ultra-low-load indentation tests. Int. J. Solids Struct. 35, 365 (1998).
32. M.F. Ashby, D. Cebon, and L. Lee-Shothaman: Cambridge Engineering Selector V3.1 (Granta Design Limited, Cambridge, 2001).
33. Y.T. Cheng and C.M. Cheng: Can stress-strain relationships be obtained from indentation curves using conical or pyramidal indenters? J. Mater. Res. 14, 3494 (1999).
34. T.W. Capehart and Y.T. Cheng: Determination constitutive models from conical indentation: Sensitivity analysis. J. Mater. Res. 18, 827 (2003).
35. Y.P. Cao and J. Lu: A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve. Acta Mater. 52, 4023 (2004).
36. J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663 (2003).
37. N. Chollacoop, M. Dao, and S. Suresh: Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51, 3713 (2003).
38. Y.P. Cao, X.Q. Qian, J. Lu, and Z.H. Yao: An energy-based method to extract plastic properties of metal materials from conical indentation tests. J. Mater. Res. 20, 1194 (2005).
39. S.Q. Shu and J. Lu: Principles for choosing indenters during the materials properties determined with indentation. J. Mater. Res. (2007, to be submitted).
40. Hysitron Incorporated: Triboscratch User Manual, Software Ver- sion 7.0 (Hysitron Inc., Minneapolis, MN, 2001).
41. C.A. Fisher-Cripps and R.L. Brian: Stress analysis of contact deformation in quasi-plastic ceramics. J. Am. Ceram.Soc. 19, 2609 (1996).
42. S.G. Estibaliz: Application of Hertzian tests to measure stress-strain characteristics of ceramics at elevated temperatures. J. Am. Ceram. Soc. 90, 149 (2007).
43. K.T. Kim, S. Cha, and S.Y. Hong: Microstructure and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites. Mater. Sci. Eng., A 430, 27 (2007).
44. Y.X. Zhou, W. Yang, Y.M. Xia, and P.K. Mallick: An experimental study on the tensile behavior of a unirectional carbon fiber reinforced aluminum composite at different strain rates. Mater. Sci. Eng., A 362, 112 (2003).
45. C.J. Boehlert, B.S. Majumdar, and D.B. Miracle: Application of the cruciform specimen geometry to obtain transverse interface-property data in a high-fiber-volume-fraction SiC/Titanium alloy composite. Metall. Mater. Trans. A 32, 3143 (2001).
46. P. Rupnowski, M. Gentz, and M. Kumosa: Mechanical response of a unidirectional graphite fiber/polyimide composite as a function of temperature. Compos. Sci. Technol. 66, 1045 (2006).