Experimental determination of constraint dependent J-R CURves for x80 pipeline steel using normalization method

Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006

Volumn , Issue , 2007, Pages 695-703

  Zhu, X K ^a   Leis, B N ^a   Shen, G ^b   Tyson, W R ^b  

^a BATTELLE MEMORIAL INSTITUTE   (United States)

^b CANMET MATERIALS TECHNOLOGY LABORATORY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

INTEGRAL VALUES; NORMALIZATION METHODS; RESISTANCE CURVES;

CONSTRAINT THEORY; CRACK PROPAGATION; INTEGRAL EQUATIONS; LOADS (FORCES); STANDARDS;

STEEL PIPE;

EID: 37349111064     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2006-13180     Document Type: Conference Paper

References (27)

1. ASTM E 1820-05, 2005, "Standard Test Method for Measurement of Fracture Toughness," American Society for Testing and Materials, West Conshohocken, PA.
2. Joyce, J. A., 1992, "J-Resistance Curve Testing of Short Crack Bend Specimens Using Unloading Compliance," Fracture Mechanics: Twenty-Second Symposium, ASTM STP 1131, Volume I, pp. 904-924.
3. Joyce, J.A. and Link, R.E., 1997, "Application of Two Parameter Elastic-Plastic Fracture Mechanics to Analysis of Structures," Engineering Fracture Mechanics, 57, pp.431-446.
4. Landow, M.P. and Marschall, C.W., 1991, "Experience in Using Direct Current Electric Potential to Monitor Crack Growth in Ductile Metals," Elastic-Plastic Fracture Test Methods: the User's Experience, ASTM STP 1114, Second Volume, pp. 163-177.
5. OH, Y.J., Kim, J.H. and Hwang, I.S., 2002, "Dynamic Loading Fracture Tests of Ferritic Steel Using the Direct Current Potential Drop Method," Journal of Testing and Evaluation, 30, pp. 221-227.
6. Herrera, R. and Landes, J.D., 1988, "Direct J-R Curve Analysis of Fracture Toughness Test," Journal of Testing and Evaluation, 16, pp. 427-449.
7. Herrera, R. and Landes, J.D., 1990, "Direct J-R Curve Analysis: A Guide to the Methodology," Fracture Mechanics: Twenty-First Symposium, ASTM STP 1074, pp. 24-43.
8. Orange, T.W., 1990, "Methods and Models for R-Curve Instability Calculations," Fracture Mechanics: Twenty-First Symposium, ASTM STP 1074, pp. 545-559.
9. Landes, J.D., Zhou, Z., Lee, K. and Herrera, R., 1991, "Normalization Method for Developing J-R curves with the LMN Function," Journal of Testing and Evaluation, 19, pp. 305-311.
10. Joyce, J. A., 2001, "Analysis of a High Rate Round Robin Based on Proposed Annexes to ASTM E 1820," Journal of Testing and Evaluation, 29, pp. 329-351.
11. Ernst, H.A., Paris, P.C. and Landes, J.D., 1981, "Estimations on J-integral and Tearing Modulus T from a Single Specimen Test Record," Fracture Mechanics: Thirteenth Conference, ASTM STP 743, pp. 476-502.
12. Sharobeam, M.H. and Landes, J.D., 1991, "The Load Separation Criterion and Methodology in Ductile Fracture Mechanics," International Journal of Fracture, 47, pp. 81-104.
13. Joyce, J.A., Ernst, H. and Paris, P.C., 1980, "Direct J-R Curve Analysis: A Guide to the Methodology," Fracture Mechanics: Twelfth National Symposium, ASTM STP 700, pp. 222-236.
14. Scibetta, M., Lucon, E., Schuurmans, J. and van Walle, E., 2006, "Numerical Simulations to Support the Normalization Data Reduction Technique," Engineering Fracture Mechanics, 73, pp. 524-534.
15. Dzugan, J. and Viehrig, H.W., 2004, "Application of the Normalization Method for the Determination of J-R Curves," Materials Science and Engineering A, 387-389, pp. 307-311.
16. Landes, J.D., Bhambri, S.K. and Lee, K., 2003, "Fracture Toughness Testing of Polymers Using Small Compact Specimens and Normalization," Journal of Testing and Evaluation, 31, pp. 1-7.
17. Joyce, J.A. and Joyce, P.J., 2004, "Toughness Characterization of a Metal Filled PolyTetraFluoro-Ethylene Using the J-Integral," Engineering Fracture Mechanics, 71, pp. 2513-2531.
18. Sreenivasan, P.R. and Mannan, S.L., 2000, "Plastic η-Factor for Three-Point Bend Specimens: Analysis of Instrumented Charpy Impact Test Results for AISI 308 Weld and AISI 316 Stainless Steels," International Journal of Fracture, 101, pp. 215-228.
19. c Determination For Shallow Notch Welded Bend Specimens," Fatigue and Fracture in Engineering Materials and Structures, 10, pp. 479-493.
20. Schindler, H.J. and Veidt, M., 1998, "Fracture Toughness Evaluation from Instrumented Sub-Size Charpy-Type Tests," Small Specimen Test Techniques, ASTM STP 1329, pp. 48-62.
21. th International Conference on Pipeline Technology, Volume 2, May 9-13, 2004, Ostend, Belgium, pp. 703-720.
22. Zhu, X.K. and Leis, B.N., 2005, "Application of Constraint Corrected J-R Curves to Fracture Analysis of Pipelines," Proceedings of 2005 ASME PVP Conference, July 17-21, 2005, Denver, Colorado, USA.
23. Wallin, K. and Laukkanen, A., 2004, "Improved Crack Growth Corrections for J-R curve Testing," Engineering Fracture Mechanics, 71, pp. 1601-1614.
24. Zhu, X.K., Chao, Y.J. and Lam, P.S., 2006. "Determination of J-R Curves for A285 Carbon Steel Using Normalization Method," Proceedings of 2006 ASME Pressure Vessels and Piping Division Conference, July 23-17, 2006, Vancouver, BC, Canada.
25. Wallin, K., 2001. "Upper Shelf Energy Normalization for Sub-Size Charpy-V Specimens," International Journal of Pressure Vessels and Piping, 78, pp. 463-470.
26. Guo, W., Dong, H., Lu, M. and Zhao, X., 2002. "The Coupled Effects of Thickness and Delamination on Cracking Resistance of X70 Pipeline Steel," International Journal of Pressure Vessels and Piping, 79, pp. 403-412.
27. Silva, M.C., Hippert, E. and Ruggieri, C., 2005. "Experimental Investigation on Ductile Tearing Properties for API X70 and X80 Pipeline Steels," Proceedings of 2005 ASME Pressure Vessels and Piping Division Conference, July 17-21, 2005, Denver, Colorado, USA.