Plastic η-factor for three-point bend specimens: Analysis of instrumented Charpy impact test results for AISI 308 weld and AISI 316 stainless steels

International Journal of Fracture

Volumn 101, Issue 3, 2000, Pages 215-228

  Sreenivasan, P R ^a   Mannan, S L ^a  

^a INDIRA GANDHI CENTRE FOR ATOMIC RESEARCH   (India)

Author keywords

a W ratio; AISI 308 stainless steel weld; AISI 316 stainless steel; Charpy impact test; Charpy specimen; Eta factor or factor; J integral; J R curves; Three point bend specimen

Indexed keywords

BENDING (DEFORMATION); FRACTURE TESTING; IMPACT TESTING; PLASTICITY; STAINLESS STEEL; WELDED STEEL STRUCTURES;

CHARPY IMPACT TESTING; STAINLESS STEEL 316; THREE POINT BENDING;

FRACTURE MECHANICS;

EID: 0033732665     PISSN: 03769429     EISSN: None     Source Type: Journal    
DOI: 10.1023/A:1007686321002     Document Type: Article

References (20)

1. Begley, J.A and Landes, J.D. (1972). The J-integral as a fracture criterion. Fracture Toughness, Proceedings of the 1971 National Symposium on Fracture Mechanics, Part Ii. ASTM STP 514, American Society for Testing and Materials, Philadelphia, PA, 1-20.
2. Ernst, H.A., Paris, P.C and Landes, J.D. (1981). Estimation of the J-integral and tearing modulus T from single specimen test records. Fracture Mechanics: Thirteenth Symposium, ASTM STP 743, American Society for Testing and Materials, Philadelphia, PA, 476-502.
3. Haigh, J.R. and Richards, C.E. (1974). Yield point loads and compliance functions for fracture mechanics specimens. CEGB Report RD/L/M461.
4. Herrera, R., Carcagno, G. and Vedia L. A. (1993). Evaluation of dynamic fracture toughness using normalisation method. Fracture Mechanics: Twenty-Third Symposium (Edited by C. Ravinder), ASTM STP 1189, American Society for Testing and Materials, Philadelphia, PA, 168-184.
5. Joyce, J.A. (1992). J-resistance curve testing of short crack bend specimens using unloading compliance. Fracture Mechanics: Twenty-Second Symposium (Vol. I) (Edited by H.A. Ernst, A. Saxena and D.L. McDowell), ASTM STP 1131, American Society for Testing and Materials, Philadelphia, PA, 904-924.
6. Kirk, M.T. and Dodds, R.H. (1993). J and CTOD estimation equations for shallow cracks in single edge notch bend specimens. Journal of Testing and Evaluation, JTEVA 21(4), 228-238.
7. Kumar, V., German, M.D. and Shih, C.F. (1981). An engineering approach for elastic-plastic fracture analysis. EPRI Report NP-1931, Palo Alto, CA.
8. Landes, J.D. and Begley, J.A. (1974). Test results from J-integral studies: An attempt to establish a JIC testing procedure. Fracture Analysis. ASTM STP 560, American Society for Testing and Materials, Philadelphia, PA, 170-186.
9. Nevalainen, M. and Wallin, K. (1994). The effect of crack depth and absolute thickness on fracture toughness of 3PB specimens. Proceedings of 10th European Conference on Fracture, EMAS Publishing, 997-1006.
10. Rice, J.R., Paris, P.C. and Merkle, J.G. (1973). Some further results of J-integral analysis and estimates. Progress in FaIw Growth and Fracture Toughness Testing. ASTM STP 536, American Society for Testing and Materials, Philadelphia, PA, 231-245.
11. Schindler, H.J. and Veidt, M. (1998). Fracture toughness evaluation from instrumented sub-size Charpy-type tests. Small Specimen Test Techniques (Edited by W.R. Corwin, S.T. Rosinski and E. van Walle), ASTM STP 1329 American Society for Testing and Materials, Philadelphia, PA.
12. Sorem, W.A., Dodds, R.H., Jr. and Rolfe, S.T. (1991). A comparison of the J-integral and CTOD parameters for short crack specimen testing. Elastic-Plastic Fracture Test Methods: The User's Experience (Second Volume) (Edited by J.A. Joyce), ASTM STP 1114, American Society for Testing and Materials, Philadelphia, PA, 19-41.
13. Sreenivasan, P.R., Ray, S.K. and Mannan, S.L. (1999a). Dynamic J-R curves and tension-impact results for an AISI 308 weld stainless steel. Being communicated to International Journal of Fracture.
14. Sreenivasan, P.R., Ray, S.K. and Mannan, S.L. (1999b). Dynamic J-R curves and tensile-toughness correlation for AISI 316 stainless steel in various thermal aging/cold-work conditions. Being communicated to Metallurgical and Materials Transactions.
15. I to work done per unit area: 'total', or 'component' 'due to crack'. International Journal of Fracture 12, 470-474.
16. Sumpter, J.D.G. (1987). JC determination for shallow notched weld bend specimens. Fatigue and Fracture of Engineering Materials and Structures 10(6) 479-493.
17. IC. Cracks and Fracture, ASTM STP 601, American Society for Testing and Materials, Philadelphia, PA, 3-18.
18. Tvergaard, V. and Needleman, A. (1986). Effect of material rate sensitivity on failure modes in the Charpy V-notch test. Journal of the Mechanics and Physics of Solids 34(3), 213-241.
19. Tvergaard, V. and Needleman, A. (1988). An analysis of the temperature and rate dependence of Charpy V-notch energies for a high nitrogen steel. International Journal of Fracture 37, 197-215.
20. Zhang, D.Z. and Lin, J. (1990). A general formula for three-point bend specimen J-integral calculation. Engineering Fracture Mechanics 36(5), 789-793.