Rheology of tin fluorophosphate glass/polyamide 12 hybrids in the low concentration regime

Journal of Rheology

Volumn 51, Issue 6, 2007, Pages 1171-1187

  Urman, Kevin ^a   Schweizer, Thomas ^b   Otaigbe, Joshua U ^a  

^a University of Southern Mississippi   (United States)

^b ETH ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

FLUOROPHOSPHATES; PHOSPHATE GLASS (PGLASS); POLYMER HYBRIDS; RHEOLOGICALLY COMPLEXES;

ELASTIC MODULI; MICROSTRUCTURE; PHASE COMPOSITION; POLYAMIDES; RHEOLOGY; THERMAL EFFECTS;

BOROPHOSPHATE GLASS;

EID: 36749088169     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.2789954     Document Type: Article

References (53)

1. Adalja, S. B., and J. U. Otaigbe, " Creep and recovery behavior of novel organic-inorganic polymer hybrids., " Polym. Compos. 23, 171-181 (2002).
2. Adalja, S. B., and J. U. Otaigbe, " Melt rheology of tin phosphate glasses., " Appl. Rheol. 11, 10-18 (2001).
3. Adalja, S. B., J. U. Otaigbe, and J. Thalacker, " Glass-polymer melt hybrids. I: Viscoelastic properties of novel affordable organic-inorganic polymer hybrids., " Polym. Eng. Sci. 41, 1055-1067 (2001).
4. Aubry, T., T. Razafinimaro, and P. Mederic, " Rheological investigation of the melt state elastic and yield properties of a polyamide-12 layered silicate nanocomposite., " J. Rheol. 49, 425-440 (2005).
5. Ausin, A., I. Eguiazabal, M. E. Munoz, J. J. Pena, and A. Santamaria, " Melt rheology of polyarylate/polybutylene terephthalate blends., " Polym. Eng. Sci. 27, 529-534 (1987).
6. Brow, R. K., Review: The structure of simple phosphate glasses., in Structure, Properties and Applications of Phosphate and Phosphate-Containing Glasses (Elsevier, Danvers, Massachusetts, 1997).
7. Choi, G.-Y., H.-G. Kim, Y.-H. Kim, C.-W. Seo, J.-H. Choi, D.-H. Han, D.-H. Oh, and K.-E. Min, " The rheological behavior of immiscible polymer-blends., " J. Appl. Polym. Sci. 86, 917-924 (2002).
8. Cox, W. P., and E. H. Merz, " Correlation of dynamic and steady flow viscosities., " J. Polym. Sci. 28, 619-622 (1958).
9. Doraiswamy, D., A. N. Mujumdar, I. Tsao, A. N. Beris, S. C. Danforth, and A. B. Metzner, " The Cox-Merz rule extended: A rheological model for concentrated suspensions and other materials with a yield stress., " J. Rheol. 35, 647-685 (1991).
10. Eckstein, A., C. Friedrich, A. Lobbrecht, R. Spitz, and R. Muelhaupt, " Comparison of the viscoelastic properties of syndio- and isotactic polypropylenes., " Acta Polym. 48, 41-46 (1997).
11. Fang, Y., J. Carreau, and P. G. Lafleur, " Thermal and rheological properties of mLLDPE/LDPE blends., " Polym. Eng. Sci. 45, 1254-1264 (2005).
12. Feldstein, M. M., V. G. Kulichikhin, S. V. Kotomin, T. A. Borodulina, M. B. Novikov, A. Roos, and C. Creton, " Rheology of Poly(N-vinyl pyrrolidone)-Poly(ethylene glycol) adhesive blends under shear flow., " J. Appl. Polym. Sci. 100, 522-537 (2006).
13. Graebling, D., R. Muller, and J. F. Palierne, " Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids., " Macromolecules 26, 320-329 (1993).
14. Gramespacher, H., and J. Meissner, " Interfacial tension between polymer melts measured by shear oscillations of their blends., " J. Rheol. 36, 1127-1141 (1992).
15. Guschl, P., J. U. Otaigbe, and C.-K. Loong, " Investigation of phase behavior during melt processing of novel inorganic-organic polymer hybrid material., " Polym. Eng. Sci. 44, 1692-1701 (2004).
16. Guschl, P. C., and J. Otaigbe, " An experimental study of morphology and rheology of terneary Pglass-PS-LDPE hybrids., " Polym. Eng. Sci. 43, 1180-1196 (2003a).
17. Guschl, P. C., and J. U. Otaigbe, " Experimental observation and prediction of interfacial tension and viscoelastic emulsion model behavior in novel phosphate glass-polymer hybrids., " J. Colloid Interface Sci. 266, 82-92 (2003b).
18. Han, C. D., and H. Chuang, " Criteria for rheological compatibility of polymer blends., " J. Appl. Polym. Sci. 30, 4431-4454 (1985).
19. Hersh, L. S., E. C. Onyiriuka, and W. Hertl, " Amine-reactive surface chemistry of zinc phosphate glasses., " J. Mater. Res. 10, 2120-2127 (1995).
20. Hoffmann, B., J. Kressler, G. Stoppelmann, C. Friedrich, and G.-M. Kim, " Rheology of nanocomposites based on layered silicates and polyamide 12., " Colloid Polym. Sci. 278, 629-636 (2000).
21. Huitric, J., P. Mederic, M. Moan, and J. Jarrin, " Influence of composition and morphology on rheological properties of polyethylene/polyamide blends., " Polymer 39, 4849-4856 (1998).
22. Jafari, S. H., P. Potshke, M. Stephan, H. Warth, and H. Alberts, " Multicomponent blends based on polyamide 6 and styrenic polymers: Morphology and melt rheology., " Polymer 43, 6985-6992 (2002).
23. Jafari, S. H., A. Yavari, A. Asadinezhad, H. A. Khonakdar, and F. Bohme, " Correlation of morphology and rheological response of interfacially modified PTT/m-LLDPE blends with varying extent of modification., " Polymer 46, 5082-5093 (2005).
24. Khonakdar, H. A., S. H. Jafari, A. Yavari, A. Asadinezhad, and U. Wagenknecht, " Rheology, morphology, and estimation of interfacial tension of LDPE/EVA and HDPE/EVA blends., " Polym. Bull. (Berlin) 54, 75-84 (2005).
25. Mackay, M. E., T. T. Dao, A. Tuteja, D. L. Ho, B. Van Horn, H.-C. Kim, and C. J. Hawker, " Nanoscale effects leading to non-Einstein-like decrease in viscosity., " Nat. Mater. 2, 762-766 (2003).
26. Moan, M., J. Huitric, M. Mederic, and J. Jarrin, " Rheological properties and reactive compatibilization of immiscible polymer blends., " J. Rheol. 44, 1227-1245 (2000).
27. Nandan, B., L. D. Kandpal, and G. N. Mathur, " Poly(ether ether ketone)/Poly(aryl ether sulfone) blends: Melt rheological behavior., " J. Polym. Sci., Part B: Polym. Phys. 42, 1548-1563 (2004).
28. O'Conner, K. M., and E. B. Orler, " Thermal, dynamic mechanical, and rheological behavior of linear low-density Polyethylene/Poly(Octadecene-Co- Maleic Anhydride) blends., " Polym. Eng. Sci. 28, 1132-1141 (1988).
29. Osman, M. A., and A. Atallah, " High-density Polyethylene Micro- and Nanocomposites: Effect of particle shape, size and surface treatment on polymer crystallinity and gas permeability., " Macromol. Rapid Commun. 25, 1540-1544 (2004).
30. Otaigbe, J. U., C. J. Quinn, and G. H. Beall, " Processability and properties of novel glass-polymer melt blends., " Polym. Compos. 19 1, 18-22 (1998).
31. Palierne, J. F., " Linear rheology of viscoelastic emulsions with interfacial tension., " Rheol. Acta 29, 204-214 (1990).
32. Park, H.-S., and T. Kyu, " Rheological and mechanical characteristics of Poly-P-Phenylene Terephthalamide/nylon molecular and particulate composites., " Polym. Compos. 10, 429-438 (1989).
33. Pavlinek, V., and P. Saha, " Rheological behavior of poly(methyl methacrylate) dispersions stabalized by a diblock copolymer: An anomalous viscosity-partical concentration dependence., " J. Rheol. 43, 1547-1554 (1999).
34. Quinn, C. J., P. Frayer, and G. Beall, " Glass-polymer melt blends., " Polymeric Materials Encyclopedia, edited by, J. C. Salamone, (CRC Press, New York, 1996), Vol. 4, pp. 2766-2777.
35. Rawal, A., K. Urman, J. U. Otaigbe, and K. Schmidt-Rohr, " Detection of nanometer-scale mixing in phosphate-glass/polyamide-6 hybrids by H1 - P31 NMR., " Chem. Mater. 18, 6333-6338 (2006).
36. Sammler, R. L., J. U. Otaigbe, M. L. Lapham, N. L. Bradley, B. C. Monahan, and C. J. Quinn, " Melt rheology of zinc alkali phosphate glasses., " J. Rheol. 40, 285-302 (1996).
37. Schmidt, L. R., " Viscoelastic melt behavior of Poly(2,6-dimethyl-1, 4-phenylene oxide), high impact polystyrene, and A 35-65 blend., " J. Appl. Polym. Sci. 23, 2463-2479 (1979).
38. Sharma, J., and N. Clarke, " Miscibility determination of a lower critical solution temperature polymer blend by rheology., " J. Phys. Chem. B 108, 13220-13230 (2004).
39. Supaphol, P., N. Dangseeyun, P. Thanomkiat, and M. Nithitanakul, " Thermal, crystallization, mechanical, and rheological characteristics of Poly(trimethylene terephthalate)/Poly(ethylene terephthalate) blends., " J. Polym. Sci., Part B: Polym. Phys. 42, 676-686 (2004).
40. Tick, P. A. (1983), U.S. Patent 4,379,070.
41. Tick, P. A., " Water duable glasses with ultra low melting temperatures., " Phys. Chem. Glasses 25 (6), 149-154 (1984).
42. Tuteja, A., M. E. Mackay, C. J. Hawker, and B. Van Horn, " Effect of ideal, organic nanoparticles on the flow properties of linear polymers: Non-Einstein-like behavior., " Macromolecules 38, 8000-8011 (2005).
43. Urman, K., D. Iverson, and J. U. Otaigbe, " Study of the effects of processing conditions on the structure and properties of phosphate glass/polyamide 12 hybrid materials., " J. Appl. Polym. Sci. 105, 1297-1308 (2006).
44. Urman, K., and J. U. Otaigbe, " Novel phosphate glass/polyamide 6 hybrids: Miscibility, crystallization kinetics, and mechanical properties., " J. Polym. Sci., Part B: Polym. Phys. 44, 441-450 (2006).
45. Urman, K., and J. U. Otaigbe, " New phosphate glass/polymer hybrids-Current status and future prospects., " Prog. Polym. Sci., doi:10.1016/j.progpolymsci.2007.07.006 (2007).
46. Urman, K., S. Madbouly, and J. U. Otaigbe, " Unusual accelerated molecular relaxations of a tin fluorophosphate glass/polyamide 6 hybrid studied by broadband dielectric spectroscopy., " Polymer 48, 1659-1666 (2007a).
47. Urman, K., T. Schweizer, and J. Otaigbe, " Uniaxial elongation flow effects and morphology development in LDPE/phosphate glass hybrids., " Rheol. Acta 46, 989-1001 (2007b).
48. Utracki, L. A., and M. R. Kamal, " Melt rheology of polymer blends., " Polym. Eng. Sci. 22, 96-114 (1982).
49. Xu, X. J., and D. E. Day, " Properties and structure of Sn-P-O-F glasses., " Phys. Chem. Glasses 31, 183-187 (1990).
50. Xu, X. J., D. E. Day, R. K. Brow, and P. M. Callahan, " Structure of tin fluorophosphate glasses containing PbO or B2O3., " Phys. Chem. Glasses 36, 264-271 (1995).
51. Yoshikawa, K., A. Molnar, and A. Eisenberg, " Rheological properties of blends of lithium- or sodium-sulfonated polystyrene ionomers with polyamide 6., " Polym. Eng. Sci. 34, 1056-1064 (1994).
52. Young, R. T., M. A. McLeod, and D. G. Baird, " Extensional processing behavior of thermoplastics reinforced with a melt processable glass., " Polym. Compos. 21, 900-917 (2000).
53. Zarraga, A., J. J. Pena, M. E. Munoz, and A. Santamaria, " Thermorheological analysis of PVC blends., " J. Polym. Sci., Part B: Polym. Phys. 38, 469-477 (2000).