New phosphate glass/polymer hybrids-Current status and future prospects

Progress in Polymer Science (Oxford)

Volumn 32, Issue 12, 2007, Pages 1462-1498

  Urman, Kevin ^a   Otaigbe, Joshua U ^a  

^a University of Southern Mississippi   (United States)

Author keywords

Hybrid organic inorganic polymers; Polyphosphate glass; Rheology; Structure and properties

Indexed keywords

COMPOSITE MATERIALS; GLASS; PLASTICS INDUSTRY; RHEOLOGY; STRUCTURAL DYNAMICS; STRUCTURAL PROPERTIES;

FACILE SYNTHESIS; HYBRID ORGANIC/INORGANIC POLYMERS; POLYMER STRUCTURE; POLYPHOSPHATE GLASS;

ORGANIC POLYMERS;

EID: 36048994675     PISSN: 00796700     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.progpolymsci.2007.07.006     Document Type: Review

References (169)

1. Chopra D., Kontopoulos M., Vlassopoulos D., and Hatzikiriakos S.G. Effect of maleic anhydride content on the rheology and phase behavior of poly(styrene-co-maleic anhydride)/poly(methyl methacrylate) blends. Rheol Acta 41 (2002) 10-24
2. Nandan B., Kandpal L.D., and Mathur G.N. Poly(ether ether ketone)/poly(aryl ether sulfone) blends: melt rheological behavior. J Polym Sci B 42 (2004) 1548-1563
3. Moan M., Huitric J., Mederic M., and Jarrin J. Rheological properties and reactive compatibilization of immiscible polymer blends. J Rheol 44 (2000) 1227-1245
4. In: Paul D.R., and Bucknall C.B. (Eds). Polymer blends-formulation. Polymer blends Vol. 1 (2000), Wiley, New York
5. In: Paul D.R., and Bucknall C.B. (Eds). Polymer blends-performance. Polymer blends Vol. 2 (2000), Wiley, New York
6. Tucker III C.L., and Moldenaers P. Microstructural evolution in polymer blends. Ann Rev Fluid Mech 34 (2002) 177-210
7. Utracki L.A., and Kamal M.R. Melt rheology of polymer blends. Polym Eng Sci 22 (1982) 96-114
8. Arkles B. Commercial applications of sol-gel-derived hybrid materials. Mater Res Bull 26 5 (2001) 402-408
9. Loy DA. Hybrid organic-inorganic materials. Mater Res Bull 2001;26(5):364-365. See also Winey KI, Vaia RA, editors. Polymer Nanocomposites. Mater Res Soc Bull 2007;32(4):314-322.
10. Mackenzie J.D. Sol-gel research-achievements since 1981 and prospects for the future. J Sol-Gel Sci Technol 26 (2003) 23-27
11. Zeigler JM, Fearon FWG, editors. Silicon-based polymer science: a comprehensive resource. Advances in Chemistry Series 224. Washington, DC: American Chemical Society; 1998.
12. Chujo Y., and Tamaki R. New preparation methods for organic-inorganic polymer hybrids. Mater Res Bull 26 5 (2001) 389-392
13. Ogoshi T., and Chujo Y. Organic-inorganic polymer hybrids prepared by the sol-gel method. Compos Interfaces 11 (2005) 539-566
14. Schmidt H. Sol-gel derived nanoparticles as inorganic phases in polymer-type matrices. Macromol Symp 159 (2000) 434-455
15. Niida H., Takahashi M., Uchino T., and Yoko T. Preparation and structure of organic-inorganic hybrid precursors for new type low-melting glasses. J Non-Cryst Solids 306 (2002) 292-299
16. Vaia R.A., and Giannelis E.P. Polymer nanocomposites: status and opportunities. Mater Res Bull 26 5 (2001) 394-401
17. Krishnamoorti R, Vaia RA, editors. Polymer nanocomposites: synthesis, characterization and modeling. American Chemical Symposium Series 804. Washington, DC: American Chemical Society; 2002.
18. Ray S.S., and Okamoto M. Polymer/layered silicate nanocomposites: a review from preparation to processing. Prog Polym Sci 28 (2003) 1539-1641
19. Brow R.K. Review: the structure of simple phosphate glasses. J. Non-Cryst Solids 263-264 (2000) 1-28
20. Otaigbe J.U., and Beall G.H. Inorganic phosphate glasses as polymers. Trends Polym Sci 5 (1997) 369-379
21. Ray N.H. Inorganic polymers (1978), Academic Press, New York
22. Ray N.H. The structure and properties of inorganic polymeric phosphates. Br Polym J 11 (1979) 163-177
23. Sales B.C., Otaigbe J.U., Beall G.H., Boatner L.A., and Ramey J.O. Structure of zinc polyphosphate glasses. J Non-Cryst Solids 226 (1998) 287-293
24. Tischendorf B.C., Otaigbe J.U., Wiench J.W., Pruski M., and Sales B.C. A study of short and intermediate range order in zinc phosphate glasses. J Non-Cryst Solids 282 (2001) 147-158
25. Wiench JW Pruski M., Tischendorf B.C., Otaigbe J.U., and Sales B.C. Structural studies of zinc polyphosphate glasses by nuclear magnetic resonance. J Non-Cryst Solids 263 and 264 (2000) 101-110
26. Hoppe U., Walter G., Kranold R., and Stachel D. Structural specifics of phosphate glasses probed by diffraction methods: a review. J Non-Cryst Solids 263 and 264 (2000) 29-47
27. Loong C.-K., Suzuya K., Price D.L., Sales B.C., and Boatner L.A. Structure and dynamics of phosphate glasses: from ultra- to orthophosphate composition. Physica B 241-243 (1998) 890-896
28. Crowder C.E., Otaigbe J.U., Barger M.A., Sammler R.L., Monahan B.C., and Quinn C.J. Melt crystallization of zinc alkali phosphate glasses. J Non-Cryst Solids 210 (1997) 209-223
29. Larson R.G. The structure and rheology of complex fluids (1999), Oxford, New York
30. Sammler R.L., Otaigbe J.U., Lapham M.L., Bradley N.L., Monahan B.C., and Quinn C.J. Melt rheology of zinc alkali phosphate glasses. J Rheol 40 (1996) 285-302
31. Sanford LM, Tick PA. Tin-phosphorous oxyfluoride glasses. 1982, US Patent: 4,314,031
32. 31P MAS NMR. Chem Mater 14 (2002) 341-347
33. Tick PA. Tin-phosphorous oxychloride glass containing aromatic organic compounds. 1983, US Patent: 4,379,070.
34. Tick P.A. Water durable glasses with ultra low melting temperatures. Phys Chem Glasses 25 (1984) 149-154
35. Xu X.J., and Day D.E. Properties and structure of Sn-P-O-F glasses. Phys Chem Glasses 31 (1990) 183-187
36. 3. Phys Chem Glasses 36 (1995) 264-271
37. Adalja S.B., and Otaigbe J.U. Melt rheology of tin phosphate glasses. Appl Rheol 11 (2001) 10-18
38. Adalja S.B., and Otaigbe J.U. Creep and recovery behavior of novel organic-inorganic polymer hybrids. Polym Compos 23 (2002) 171-181
39. Urman K., Iverson D., and Otaigbe J.U. A study of the effects of processing conditions on the structure and properties of phosphate glass/polyamide 12 hybrid materials. J Appl Polym Sci 105 (2006) 1297-1308
40. Urman K., and Otaigbe J.U. Novel phosphate glass/polyamide 6 hybrids: miscibility, crystallization kinetics, and mechanical properties. J Polym Sci B 44 (2006) 441-450
41. Urman K., Schweizer T., and Otaigbe J.U. Uniaxial elongation flow effects and morphology development in LDPE/phosphate glass hybrids. Rheol Acta 46 (2007) 989-1001
42. Otaigbe J.U., Quinn C.J., and Beall G.H. Processability and properties of novel glass-polymer melt blends. Polymer Composites 19 (1998) 18-22
43. Quinn CJ, Frayer P, Beall G. Glass-polymer melt blends. In: J.C. Salamone, editor. Polymeric materials encyclopedia. New York: CRC Press; 1996. p. 2766-2777. See also Frayer PD, Monahan RJ, Pierson MD. Glass/polymer melt blends. Corning, Inc., 2001, US Patent:6268425
44. Young R.T., McLeod M.A., and Baird D.G. Extensional processing behavior of thermoplastics reinforced with a melt processable glass. Polym Compos 21 (2000) 900-917
45. Adalja S.B., Otaigbe J.U., and Thalacker J. Glass-polymer melt hybrids. I: viscoelastic properties of novel affordable organic-inorganic polymer hybrids. Polym Eng Sci 41 (2001) 1055-1067
46. In: Rubin I.I. (Ed). Handbook of plastic materials and technology (1990), Wiley, New York
47. Guschl P., and Otaigbe J.U. Experimental observation and prediction of interfacial tension and viscoelastic emulsion model behavior in novel phosphate glass-polymer hybrids. J Colloid Interface Sci 266 (2003) 82-91
48. Guschl P., Otaigbe J.U., and Loong C.-K. Investigation of phase behavior during melt processing of novel inorganic-organic polymer hybrid material. Polym Eng Sci 44 (2004) 1692-1701
49. Guschl P.C., and Otaigbe J.U. An experimental study of morphology and rheology of ternary pglass-PS-LDPE hybrids. Polym Eng Sci 43 (2003) 1180-1196
50. Graebling D., Muller R., and Palierne J.F. Linear viscoelastic behavior of some incompatible polymer blends in the melt. Interpretation of data with a model of emulsion of viscoelastic liquids. Macromolecules 26 (1993) 320-329
51. Palierne J.F. Linear rheology of viscoelastic emulsions with interfacial tension. Rheol Acta 29 (1990) 204-214
52. Carre A. Surface tension of molten glass from drop profile: application to the characterization of the interface in glass/polymer blends. J Adhes 54 (1995) 167-174
53. g tin-based phosphate glass. J Appl Polym Sci 90 (2003) 3445-3456
54. Guschl P.C., Otaigbe J.U., and Taylor E.P. Engineered hybrid organic-inorganic thermoplastic materials: crystallization kinetics and tensile properties. SPE Antec Tech Papers 61 2 (2003) 2137-2141
55. Young R.T., McLeod M.A., and Baird D.G. Deformation behavior of thermoplastics reinforced with melt processable glasses. SPE Antec Tech Papers 57 2 (1999) 2698-2702
56. Mechbal N., and Bousmina M. Uniaxial deformation and relaxation of polymer blends: relationship between flow and morphology development. Rheol Acta 43 (2004) 119-126
57. Oosterlinck F., Mours M., Laun H.M., and Moldenaers P. Morphology development of a polystyrene/polymethylmethyacrylate blend during start-up of uniaxial elongational flow. J Rheol 49 (2005) 897-918
58. Barnes H.A. A handbook of elementary rheology (2000), Cambrian Printers, Aberystwyth
59. Meissner J., and Hostettler J. A new elongational rheometer for polymer melts and other highly viscoelastic liquids. Rheol Acta 33 (1994) 1-21 See also
60. Meissner J. Development of a universal extensional rheometer for the uniaxial extension of polymer melts. J Rheol 16 (1972) 405-420
61. Lodge A.S., and Meissner J. Comparison of network theory predictions with stress/time data in shear and elongation for a low-density polyethylene melt. Rheol Acta 12 (1973) 41-47
62. Mu{combining double acute accent}nstedt H. New universal extension rheometer for polymer melts 23 (1979) 421-436
63. Handge U.A., and Potschke P. Interplay of rheology and morphology in melt elongation and subsequent recovery of polystyrene/poly(methylacrylate) blends. J Rheol 48 (2004) 1103-1122
64. Schulze J.S., Lodge T.P., Macosko C.W., Hepperle J., Munstedt H., Bastian H., et al. Comparison of extensional viscosity measurements from various RME rheometers. Rheol Acta 40 (2001) 457-466
65. Guschl PC. Chemical engineering, PhD thesis. Iowa State University: Ames; 1999.
66. Van Wazer J.R. Phosphorous and its compounds vols. I and II (1958), Wiley, New York
67. Han C.D., and Chuang H. Criteria for rheological compatibility of polymer blends. J Appl Polym Sci 30 (1985) 4431-4454
68. Utracki L.A., and Sammut P. Rheology of polycarbonate/linear low-density polyethylene blends. Polym Eng Sci 30 (1990) 1027-1040
69. Yoshikawa K., Molnar A., and Eisenberg A. Rheological properties of blends of lithium- or sodium-sulfonated polystyrene ionomers with polyamide 6. Polym Eng Sci 34 (1994) 1056-1064
70. Takahashi T., Takimoto J.-I., and Koyama K. Uniaxial elongational viscosity of various molten polymer composites. Polym Compos 20 (1999) 357-366
71. Chan Y., White J.L., and Oyanagi Y. A fundamental study of the rheological properties of glass-fiber-reinforced polyethylene and polystyrene melts. J Rheol 22 (1978) 507-524
72. Goddard J.D. Tensile behavior of power-law fluids containing oriented slender fibers. J Rheol 22 (1978) 615-622
73. Hong J.S., Ahn K.H., and Lee S.J. Strain hardening behavior of polymer blends with fibril morphology. Rheol Acta 45 (2005) 202-208
74. Valenza A., La Mantia F.P., and Acierno D. The rheological behavior of hdpe/ldpe blends. V. Isothermal elongation and constant stretching rate. J Rheol 30 (1986) 1085-1092
75. Wagner M.H., Kheirandish S., and Yamaguchi M. Quantitative analysis of melt elongational behavior of LLDPE/LDPE blends. Rheol Acta 44 (2004) 198-218
76. Heindl M., Sommer M.-K., and Mu{combining double acute accent}nstedt H. Morphology development in polystyrene/polyethylene blends during uniaxial elongational flow. Rheol Acta 44 (2004) 55-70
77. Diez F.J., Alvarino C., Lopez J., Ramirez C., Abad M.J., Cano J., et al. Influence of the Stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films. J Therm Anal Calorim 81 (2005) 21-25
78. Hakme C., Stevenson I., Boiteux G., Seytre G., and Schoenhals A. Uniaxially stretched poly(ethylene naphthalene-2,6-dicarboxylate) films studied by broadband dielectric spectroscopy. J Non-Cryst Solids 35 (2005) 33-36
79. Marco Y., Chevalier L., Regnier G., and Poitou A. Induced crystallization and orientation of poly(ethylene terephthalate) during uniaxial and biaxial elongation. Macromol Symp 185 (2002) 15-34
80. Somani R.H., Yang L., Hsiao B.S., Sun T., Pogodina N.V., and Lustiger A. Shear-induced molecular orientation and crystallization in isotactic polypropylene: effects of the deformation rate and strain. Macromolecules 38 (2005) 1244-1255
81. Hersh L.S., Onyiriuka E.C., and Hertl W. Amine-reactive surface chemistry of zinc phosphate glasses. J Mater Res 10 (1995) 2120-2127
82. Urman K, Schweizer T, Otaigbe JU. Rheology of tin fluorophosphate glass/polyamide 12 hybrids in the low concentration regime. J Rheol 2007, accepted.
83. Mackay M.E., Dao T.T., Tuteja A., Ho D.L., Van Horn B., and Kim H.-C. Nanoscale effects leading to non-Einstein-like decrease in viscosity. Nat Mater 2 (2003) 762-766
84. Tuteja A., Mackay M.E., Hawker C.J., and Van Horn B. Effect of ideal, organic nanoparticles on the flow properties of linear polymers: non-Einstein-like behavior. Macromolecules 38 (2005) 8000-8011
85. Gramespacher H., and Meissner J. Interfacial tension between polymer melts measured by shear oscillations of their blends. J Rheol 36 (1992) 1127-1141
86. Jafari S.H., Potshke P., Stephan M., Warth H., and Alberts H. Multicomponent blends based on polyamide 6 and styrenic polymers: morphology and melt rheology. Polym Bull 43 (2002) 6985-6992
87. Doraiswamy D., Mujumdar A.N., Tsao I., Beris A.N., Danforth S.C., and Metzner A.B. The Cox-Merz rule extended: a rheological model for concentrated suspensions and other materials with a yield stress. J Rheol 35 4 (1991) 647-685
88. Feldstein M.M., Kulichikhin V.G., Kotomin S.V., Borodulina T.A., Novikov M.B., Roos A., et al. Rheology of poly(N-vinyl pyrrolidone)-poly(ethylene glycol) adhesive blends under shear flow. J Appl Polym Sci 100 (2006) 522-537
89. Pavlinek V., and Saha P. Rheological behavior of poly(methyl methacrylate) dispersions stabilized by a diblock copolymer: an anomalous viscosity-particle concentration dependence. J Rheol 43 (1999) 1547-1554
90. Aubry T., Razafinimaro T., and Mederic P. Rheological investigation of the melt state elastic and yield properties of a polyamide-12 layered silicate nanocomposite. J Rheol 49 (2005) 425-440
91. Osman M.A., and Atallah A. High-density polyethylene micro- and nanocomposites: effect of particle shape, size and surface treatment on polymer crystallinity and gas permeability. Macromol Rapid Commun 25 (2004) 1540-1544
92. Park H.-S., and Kyu T. Rheological and mechanical characteristics of poly-p-phenylene terephthalamide/nylon molecular and particulate composites. Polym Compos 10 (1989) 429-438
93. Hoffmann B., Kressler J., Stoppelmann G., Friedrich C., and Kim G.-M. Rheology of nanocomposites based on layered silicates and polyamide 12. Colloid Polym Sci 278 (2000) 629-636
94. Eckstein A., Friedrich C., Lobbrecht A., Spitz R., and Muelhaupt R. Comparison of the viscoelastic properties of syndio- and isotactic polypropylenes. Acta Polym 48 1/2 (1997) 41-46
95. Khonakdar H.A., Jafari S.H., Yavari A., Asadinezhad A., and Wagenknecht U. Rheology, morphology, and estimation of interfacial tension of LDPE/EVA and HDPE/EVA blends. Polym Bull 54 (2005) 75-84
96. Zarraga A., Pena J.J., Munoz M.E., and Santamaria A. Thermorheological analysis of PVC blends. J Polym Sci B 38 (2000) 469-477
97. Choi G.-Y., Kim H.-G., Kim Y.-H., Seo C.-W., Choi J.-H., Han D.-H., et al. The rheological behavior of immiscible polymer-blends. J Appl Polym Sci 86 (2002) 917-924
98. Fang Y., Carreau P.J., and Lafleur P.G. Thermal and rheological properties of mLLDPE/LDPE blends. Polym Eng Sci 45 (2005) 1254-1264
99. Jafari S.H., Yavari A., Asadinezhad A., Khonakdar H.A., and Bohme F. Correlation of morphology and rheological response of interfacially modified PTT/m-LLDPE blends with varying extent of modification. Polymer 46 (2005) 5082-5093
100. Bourry D., and Favis B.D. Cocontinuity and phase inversion in HDPE/PS blends: influence of interfacial modification and elasticity. J Polym Sci B 36 (1998) 1889-1899
101. Cheng S.-K., Wang C.-C., and Chen C.-Y. Study on the phase behavior of EVA/PS blends during in situ polymerization. Polym Eng Sci 43 (2003) 1221-1231
102. Veenstra H.J.J., van Lent B., van Dam J., and Posthuma de Boer A. Co-continuous morphologies in polymer blends with SEBS block copolymers. Polymer 40 (1999) 6661-6672
103. Deimede V.A., Fragou K.V., Koulouri E.G., Kallitsis J.K., and Voyiatzis G.A. Miscibility behavior of polyamide 11/sulfonated polysulfone blends using thermal and spectroscopic techniques. Polymer 41 (2000) 9095-9101
104. Zheng S., Huang J., Liu W., Yang X., and Guo Q. Miscibility and phase behaviour in blends of poly(vinyl alcohol) and a copolyamide. Eur Polym J 32 (1996) 757-776
105. Balsamo V., Calzadilla N., Mora G., and Muller A.J. Thermal characterization of polycarbonate/polycaprolactone blends. J Polym Sci B 39 (2001) 771-785
106. Martuscelli E., Pracella M., and Yue W.P. Influence of composition and molecular mass on the morphology, crystallization and melting behavior of poly(ethylene oxide)/poly(methyl methacrylate) blends. Polymer 25 (1984) 1097-1106
107. Shi Y., and Jabarin S.A. Glass-transition and melting behavior of poly(ethylene terephtalate)/poly(ethylene 2,6-naphthalate) blends. J Appl Polym Sci 81 (2001) 11-22
108. Nishi T., and Wang T.T. Melting point depression and kinetic effects of cooling on crystallization in poly(vinylidene fluoride)-poly(methyl methacrylate) mixtures. Macromolecules 8 (1975) 909-915
109. Gedde U.W. Polymer physics (1999), Kluwer, Boston p. 169-98
110. In: Brandrup J., and Immergut E.H. (Eds). Polymer handbook. 3rd ed (1989), Wiley, New York
111. Hoffman J.D., and Weeks J.J. Melting process and equilibrium melting temperature of poly(chlorotrifluoroethylene). J Res Nat Bur Standards 66A 1 (1962) 13-28
112. Castro M., Carrot C., and Prochazka F. Experimental and theoretical description of low frequency viscoelastic behavior in immiscible polymer blends. Polymer 45 (2004) 4095-4104
113. Risch B.G., Wilkes G.L., and Warakomski J.M. Crystallization kinetics and morphological features of star-branched nylon-6: effect of branch-point functionality. Polymer 34 (1993) 2330-2343
114. Painter P.C., and Coleman M.M. Fundamentals of polymer science. 2nd ed (1997), Technomic, Lancaster
115. Eguiburu J.L., Iruin J.J., Fernandez-Berridi M.J., and San Roman J. Blends of amorphous and crystalline polylactides with poly(methyl methacrylate) and poly(methyl acrylate): a miscibility study. Polymer 39 (1998) 6891-6896
116. Wadey B.L. Plasticizers. In: Meyers R. (Ed). Encyclopedia of physical science and technology (2001), Academic Press, New York
117. Nielsen L.E., and Landel R.F. Mechanical properties of polymers and composites. 2nd ed (1994), Marcel Dekker, New York
118. Baiardo M., Frisoni G., Scandola M., Rimelen M., Lips D., Ruffieux K., et al. Thermal and mechanical properties of plasticized poly(l-lactic acid). J Appl Polym Sci 90 (2003) 1731-1738
119. Jacobsen S., and Fritz H.G. Plasticizing polylactide-the effect of different plasticizers on the mechanical properties. Polym Eng Sci 39 (1999) 1303-1310
120. Ash B.J., Siegel R.W., and Schadler L.S. Mechanical behavior of alumina/poly(methyl methacrylate) nanocomposites. Macromolecules 37 (2004) 1358-1369
121. Ash B.J., Siegel R.W., and Schadler L.S. Glass-transition temperature behavior of alumina/PMMA nanocomposites. J Polym Sci B 42 (2004) 4371-4383
122. Li G.Z., Cho H., Wang L., Toghiani H., and Pittman Jr. C.U. Synthesis and properties of poly(isobutyl methacrylate-co-butanediol dimethacrylate-co-methacryl polyhedral oligomeric silsesquioxane) nanocomposites. J Polym Sci, Part A 43 (2005) 355-372
123. Alegria A., Colmenero J., Ngai K.L., and Roland C.M. Observation of the component dynamics in a miscible polymer blend by dielectric and mechanical spectroscopies. Macromolecules 27 (1994) 4486-4492
124. Alvarez F., Alegria A., and Colmenero J. Study of the two-component segmental dynamics of poly(vinylethylene)/polyisoprene miscible blends. Macromolecules 30 (1997) 597-604
125. Dionisio M.C.S., Ramos J.J.M., and Fernandes A.C. Dielectric studies on the miscibility in poly(vinyl acetate)/poly(ethyl methacrylate) blends. J Appl Polym Sci 60 (1996) 903-909
126. Madbouly S.A., Otaigbe J.U., Hassan M.K., and Mauritz K.A. Broadband dielectric spectroscopy of mPP/PC blend prepared via in situ polymerization and compatibilization. Am Chem Soc Polym Mater Sci Eng 94 (2006) 831-832
127. Pratt G.J., and Smith M.J.A. A dielectric investigation of miscibility and morphology in engineering thermoplastics. Polym Int 43 (1997) 137-142
128. Perrin F.X., Nguyen V.N., and Vernet J.L. Dielectric study of the effect of a sol-gel inorganic network on polymeric relaxation dynamics in acrylic/titania hybrids. Macromol Chem Phys 206 (2005) 1439-1447
129. Davis R.D., Bur A.J., McBrearty M., Lee Y.-H., Gilman J.W., and Start P.R. Dielectric spectroscopy during extrusion processing of polymer nanocomposites: a high throughput processing/characterization method to measure layered silicate content and exfoliation. Polymer 45 (2004) 6487-6493
130. Lee Y.-H., Bur A.J., Roth S.C., and Start P.R. Accelerated alpha relaxation dynamics in the exfoliated Nylon-11/clay nanocomposite observed in the melt and semicrystalline state by dielectric spectroscopy. Macromolecules 38 (2005) 3828-3837
131. Frank B., Frubing P., and Pissis P. Water sorption and thermally stimulated depolarization currents in Nylon-6. J Polym Sci B: Polym Phys 34 (1996) 1853-1860
132. Laredo E., Grimau M., Sanchez F., and Bello A. Water absorption effect on the dynamic properties of Nylon-6 by dielectric spectroscopy. Macromolecules 36 (2003) 9840-9850
133. Laredo E., and Hernandez M.C. Moisture effect on the low- and high-temperature dielectric relaxations in Nylon-6. J Polym Sci B 35 (1997) 2879-2888
134. McCrum N.G., Read B.E., and Williams G. Anelastic and dielectric effects in polymeric solids (1991), Dover, New York p. 617
135. O'Reilly J.M., and Papadopoulos K. Novel organic-inorganic glasses. J Mater Sci 36 (2001) 1595-1600
136. Liu Y., and Donovan J.A. Miscibility and crystallizationf of semicrystalline nylon 6 and amorphous nylon 6lcoT blends. Polymer 36 (1995) 4797-4803
137. Zhang S.H., Jin X., Painter P.C., and Runt J. Composition-dependent dynamics in miscible polymer blends: influence of intermolecular hydrogen bonding. Polymer 45 (2004) 3933-3942
138. Havriliak S., and Negami S. A complex plane representation of dielectric and mechanical relaxation processes in some polymers. J Polym Sci Polym Symp 14 (1966) 161-210
139. Kryitsis A., Pissis P., Grigorieva O.P., Sergeeva L.M., Brouko A.A., Zimich O.N., et al. Structure-property relationships in thermoplastic-apparent interpenetrating polymer networks based on crystallizable polyurethane and styrene-acrylic acid copolymer. J Appl Polym Sci 73 (1999) 385-397
140. Shafee E.E. Investigation of the phase structure of poly(3-hydroxybutyrate)/poly(vinyl acetate) blends by dielectric relaxation spectroscopy. Eur Polym J 37 (2001) 451-458
141. Urman K., Madbouly S., and Otaigbe J.U. Unusual accelerated molecular relaxations of a tin fluorophosphate glass/polyamide 6 hybrid studied by broadband dielectric spectroscopy. Polymer 48 (2006) 1659-1666
142. In: Runt J.P., and Fitzgerald J.J. (Eds). Dielectric spectroscopy of polymeric materials: fundamentals and applications. American Chemical Society Symposium Series 461 (1997), American Chemical Society, Washington, DC
143. 1H} recoupling. J Chem Phys 126 (2007) 054701/1-054701/16
144. Rawal A., Urman K., Otaigbe J.U., and Schmidt-Rohr K. Detection of nanometer-scale mixing in phosphate-glass/polyamide-6 hybrids by 1H-31P NMR. Chem Mater 18 (2006) 6333-6338
145. Zabel H. Quasi-elastic scattering: a powerful tool for investigating diffusion in solids. In: Murch G.E., Birnbaum H.K., and Cost J.R. (Eds). Nontraditional methods in diffusion (1984), AIME publication
146. Kim J., Zhou H., Nguyen S.T., and Torkelson J.M. Synthesis and application of styrene/4-hydroxystyrene gradient copolymers made by controlled radical polymerization: compatibilization of immiscible polymer blends via hydrogen-bonding effects. Polymer 47 (2006) 5799-5809
147. Kolarik J., Fambri L., Slouf M., and Konecny D. Heterogeneous polyamide 66/syndiotactic polystyrene blends: phase structure and thermal and mechanical properties. J Appl Polym Sci 96 (2005) 673-684
148. Lee S.Y., and Kim S.C. Effect of compatibilizer on the crystallization, rheological, and tensile properties of LDPE/EVOH blends. J Appl Polym Sci 68 (1998) 1245-1256
149. Qui Z., and Yang W. Crystallization kinetics and morphology of poly(butylene succinate)/poly(vinyl phenol) blend. Polymer 47 (2006) 6429-6437
150. Sarasua J.R., Arraiza A.L., Balerdi P., and Maiza I. Crystallinity and mechanical properties of optically pure polylactides and their blends. Polym Eng Sci 45 (2005) 743
151. Wilkinson A.N., Tattum S.B., and Ryan A.J. Inhibition of crystalline structure development in a reactive polycarbonate-poly(butylene terephthalate) blend. Polym Bull 48 (2002) 199-206
152. Tol R.T., Mathot V.B.F., and Groeninckx G. Confined crystallization phenomena in immiscible polymer blends with dispersed micro- and nanometer sized PA6 droplets. Part 3: crystallization kinetics and crystallinity of micro- and nanometer sized PA6 droplets crystallizing at high supercoolings. Polymer 46 (2005) 2955-2965
153. Chen C., Yu P.H.F., and Cheung M.K. Hydrogen bonding, miscibility, crystallization, and thermal stability in blends of biodegradable polyhydroxyalkanoates and polar small molecules of 4-tert-butylphenol. J Appl Polym Sci 98 (2005) 736-745
154. Peng S., An Y., Chen C., Fei B., Zhuang Y., and Dong L. Miscibility and crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(propylene carbonate) blends. J Appl Polym Sci 90 (2003) 4054-4060
155. Akiba I., and Akiyama S. Phase diagram of Poly(4-vinylphenol)-N,N dimethyloctadecylamine mixture. Macromolecules 32 (1999) 3741-3745
156. Habenschuss A., Varma-Nair M., Kwon Y.K., Ma J., and Wunderlich B. The phase diagram of poly(4-hydroxybenzoic acid) and poly(2,6-hydroxynaphthoic acid) and their copolymers from X-ray diffraction and thermal analysis. Polymer 47 (2006) 2369-2380
157. Park J.-Y., Kim D., Harris F.W., and Cheng S.Z.D. Phase structure, morphology and phase boundary diagram in an aromatic polyimide (BPDA-PFMB)/m-cresol system. Polym Int 37 (1995) 207-214
158. Horst R., and Wolf B.A. Calculation of shear influences on the phase separation of polymer blends exhibiting upper critical solution temperatures. Rheol Acta 33 (1994) 99-1071
159. Krause C., Horst R., and Wolf B.A. Shear effects on the phase diagrams of solutions of highly incompatible polymers in a common solvent. 2. Experiment and theory. Macromolecules 30 (1997) 885-889
160. Madbouly S.A. Binary miscible blends of poly(methyl mehtacrylate)/poly(alpha-methyl styrene-co-acrylonitrile). IV. Relationship between shear flow and viscoelastic properties. J Macromol Sci-Phys 42 (2003) 1209-1223
161. Madbouly S.A., Chiba T., Ougizawa T., and Inoue T. Shear effect on the phase behavior and morphology in PMMA/SAN-29.5 blend. J Macromol Sci-Phys 38 1 and 2 (1999) 79-92
162. Madbouly S.A., Ohmomo M., Ougizawa T., and Inoue T. Effect of the shear flow on the phase behavior of polystyrene/poly(vinyl methyl ether) blend. Polymer 40 (1999) 1465-1472
163. Madbouly S.A., and Wolf B.A. Shear-induced crystallization and shear-induced dissolution of poly(ethylene oxide) in mixtures with tetrahydronaphthalene and oligio(dimethyl siloxane-b-ethylene oxide). Macromol Chem Phys 204 (2003) 417-424
164. Agarwal P.K., Somani R.H., Weng W., Mehta A., Yang L., Ran S., et al. Shear-Induced cyrstallization in novel long chain branched polypropylenes by in situ Rheo-SAXS and -WAXD. Macromolecules 36 (2003) 5226-5235
165. Yang L., Somani R.H., Sics I., Hsiao B.S., Kolb R., Fruitwala H., et al. Shear-induced crystallization precursor studies in model polyethylene blends by in situ Rheo-SAXS and Rheo-WAXD. Macromolecules 37 (2004) 4845-4859
166. Malwitz M.M., Butler P.D., Porcar L., Angelette D.P., and Schmidt G. Orientation and relaxation of polymer-clay solutions studied by rheology and small-angle neutron scattering. J Polym Sci B 42 (2004) 3102-3112
167. Mortensen K., Theunissen E., Kleppinger R., and Almdal K. Shear-induced morphologies of cubic ordered block copolymer micellar networks studied by in situ small-angle neutron scattering and rheology. Macromolecules 35 (2002) 7773-7781
168. Crist B. Thermodynamic interactions in isotope blends: experiment and theory. Macromolecules 31 (1998) 5853-5860
169. Lee J.S., Foster M.D., and Wu D.T. Effects of branch points and chain ends on the thermodynamic interaction parameter in binary blends of regularly branched and linear polymers. Macromolecules 39 (2006) 5113-5121