Computational feasibility analysis of direct-adhesion polymer-to-metal hybrid technology for load-bearing body-in-white structural components

Journal of Materials Processing Technology

Volumn 195, Issue 1-3, 2008, Pages 282-298

  Grujicic, M ^a   Sellappan, V ^a   Arakere, G ^a   Seyr, Norbert ^b   Erdmann, Marc ^c  

^a Clemson University   (United States)

^b BMW GROUP   (Germany)

^c BMW AG   (Germany)

Author keywords

Automotive structural components; Polymer metal adhesion; Polymer metal hybrids

Indexed keywords

ADHESION; COMPUTATIONAL FLUID DYNAMICS; INJECTION MOLDING; METALS;

COMPUTATIONAL FEASIBILITY ANALYSIS; DIRECT-ADHESION POLYMER-TO-METAL HYBRID TECHNOLOGY; LOAD-BEARING BODY-IN-WHITE STRUCTURAL COMPONENTS; POLYMER METAL HYBRID (PMH) TECHNOLOGY;

POLYMERS;

EID: 36549040895     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2007.05.016     Document Type: Article

References (56)

1. ABAQUS. Version 6.6, User Documentation (2006), ABAQUS Inc., Rising Sun Mills, Providence, RI
2. Advani S.G., and Tucker III C.L. The use of tensors to describe and predict fibers orientation in short fiber composites. J. Rheol. 31 (1987) 751-784
3. Altan M.C., GuÈceri S.I., and Pipes R.B. Anisotropic channel flow of fiber suspensions. J. Non-Newtonian Fluid Mech. 14 (1992) 65-83
4. Baaijens F.P.T. Calculation of residual stress in injection molded products. Rheol. Acta 30 (1991) 284-299
5. Bird R.B., Armstrong R.C., and Hassager O. Dynamics of Polymeric Liquids: Fluid Mechanics, vol. 1. second ed. (1987), Wiley, New York
6. Boitout F., Agassant J.F., and Vincent M. Elastic calculation of residual stresses in injection molding: influence of mold deformation and pressure in the liquid. Int. Polym. Process. 10 (1995) 237-242
7. Bushko W.C., and Stokes V.K. Solidification of thermoviscoelastic melts Part 1. Formulation of model problem. Polym. Eng. Sci. 35 (1995) 351-364
8. Bushko W.C., and Stokes V.K. Solidification of Thermoviscoelastic melts Part 2. Effects of processing conditions on shrinkage and residual stresses. Polym. Eng. Sci. 35 (1996) 365-383
9. Bushko W.C., and Stokes V.K. Solidification of thermoviscoelastic melts. Part 3. Effects of mold surface temperature differences on warping and residual stresses. Polym. Eng. Sci. 36 (1996) 322-335
10. Bushko W.C., and Stokes V.K. Solidification of thermoviscoelastic melts. Part 4. Effects of boundary conditions on shrinkage and residual stresses. Polym. Eng. Sci. 36 (1996) 658-675
11. Camacho C.W., Tucker III C.L., Yalvac S., and McGee R.L. Stiffness and thermal expansion predictions for hybrid short fiber composites. Polym. Compos. 11 (1990) 229-239
12. Caspers, VIp, L., 1996. An Integral Approach to the Simulation of Injection Molding, Ph.D. Thesis, Eindhoven University of Technology.
13. Chiang H.H., Hieber C.A., and Wang K.K. A Unified Simulation of the filling and postfilling stages in injection molding Part 1. Formulation. Polym. Eng. Sci. 31 (1991) 116-124
14. Cintra Jr. J.S., and Tucker III C.L. Orthotropic closure approximations for flow-induced fibers orientation. J. Rheol. 39 (1995) 1095-1122
15. Couniot A., Dheur L., and Dupret F. Numerical simulation of injection molding: nonisothermal filling of complex thin parts, including abrupt changes of thickness or bifurcations of midsurface. In: Cross M., Pittman J.F.T., and Wood R.D. (Eds). Proc. IMA Conf. on Mathematical Modelling for Materials Processing. Bristol (1991), Clarendon Press, Oxford
16. Crochet M.J., Dupret F., and Verleye V. In: Advani S.G. (Ed). Flow and Rheology in Polymer Composites Manufacturing (1994), Elsevier, Amsterdam Chapter 11
17. In: Doi M. (Ed). Molecular dynamics and rheological properties of concentrated solutions of rodlike polymers in isotropic and liquid crystalline phases. J. Polym. Sci. Polym. Phys. 19 (1981) 229-243
18. Eduljee R.F., McCullough R.L., and Gillespie Jr. J.W. The influence of aggregated and dispersed textures on the elastic properties of discontinuous-fiber composites. Comp. Sci. Tech. 50 (1994) 381-391
19. Fan X.J., Phan-Thien N., and Zheng R. A direct simulation of fiber suspensions. J. Non-Newtonian Fluid Mech. 74 (1998) 113-136
20. Ferry J.D. Viscoelastic Properties of Polymers. third ed. (1980), Wiley, New York
21. Folgar F.P., and Tucker C.L. Orientation behaviour of fibers in concentrated suspensions. J. Reinforced Plastics Compos. 3 (1984) 98-119
22. Givler R.C., Crochet M.J., and Pipes R.B. Numerical predictions of fibers orientation in dilute suspensions. J. Compos. Mater. 17 (1983) 330-343
23. Guell D., and Lovalenti M. An examination of assumptions underlying the state of the art in injection molding modeling. SPE ANTEC 95 1 (1995) 728-732
24. Gupta M., and Wang K.K. Fibers orientation and mechanical properties of short-fiber-reinforced injection-molded composites: simulation and experimental results. Polym. Compos. 14 (1993) 367-381
25. Halpin J.C., and Kardos J.L. The Halpin-Tsai equations: a review. Polym. Eng. Sci. 16 (1976) 344-352
26. Hieber C.A., and Shen S.F. A finite-element/finite-difference simulation of the injection-molding filling process. J. Non-Newtonian Fluid Mech. 7 (1980) 1-32
27. Hinch E.J., and Leal L.G. Constitutive equations in suspension mechanics. Part 1. Approximate forms for a suspension of rigid particles affected by Brownian rotations. J. Fluid Mech. 76 (1976) 187-208
28. Jansen K.M.B. Residual stresses in quenched and injection molded products. Int. Polym. Process. 9 (1994) 82-89
29. Jeffery G.B. The motion of ellipsoidal particles immersed in viscous fluid. Proc. R. Soc. Lond. A 102 (1922) 161-179
30. Kamal M.R., and Kenig S. The injection molding of thermoplastics Part I. Theoretical model. Polym. Eng. Sci. 12 (1972) 294-301
31. Kennedy P. Flow Analysis of Injection Molds (1995), Hanser, Munich
32. Kietzmann C.V.L., Van Der Walt J.P., and Morsi Y.S. A free-front tracking algorithm for a control-volume Hele-Shaw method. Int. J. Num. Meth. Eng. 41 (1998) 253-269
33. Liou W.J., and Tseng C.I. Creep behavior of nylon-6 thermoplastic composites. Polym. Compos. 8 (1997) 492-499
34. Lipscomb II G.G., Denn M.M., Hur D.U., and Boger D.V. The flow of fiber suspensions in complex geometry. J. Non-Newtonian Fluid Mech. 26 (1988) 297-325
35. Moldflow Plastics Insight. Version 6.0, User Documentation (2006), Moldflow Corporation, Framingham, MA
36. In: Papathanasiou T.D., and Guell D.C. (Eds). Flow-induced Alignment in Composite Materials (1997), Woodhead, Cambridge, UK
37. Phan-Thien N., and Graham A.L. A new constitutive model for fiber suspensions: flow past a sphere. J. Rheol. 30 (1991) 44-57
38. Phan-Thien N., and Zheng R. Macroscopic modelling of the evolution of fibers orientation during flow. In: Papathanasiou T.D., and Guell D.C. (Eds). Flow-induced Alignment in Composite Materials (1997), Woodhead, Cambridge, UK Chapter 3
39. Phan-Thien N., Zheng R., and Graham A.L. The flow of a model suspension fluid past a sphere. J. Stat. Phys. 62 (1991) 1173-1195
40. Plastic-Metal Hybrid Material, in press. http://www.hbmedia.net/polymotive/polymotive/2003/01/articles/frontend1.shtml.
41. Ramani K., and Moriarty B. Thermoplastic bonding to metals via injection molding for macro-composite manufacture. Polym. Eng. Sci. 38 5 (1998) 870-877
42. Recktenwald D. Advanced adhesives foster hybrid structures. Machine Des. 77 21 (2005) 124-126
43. Rezayat M., and Burton T.E. A boundary-integral formulation for complex three-dimensional geometries. Int. J. Num. Meth. Eng. 29 (1990) 263-273
44. Rosenberg J., Denn M.M., and Keunings R. Simulation of non-recirculating flows of dilute fiber suspensions. J. Non-Newtonian Fluid Mech. 37 (1990) 317-345
45. Schapery R.A. Thermal expansion coefficients of composite materials based on energy principles. J. Compos. Mater. 2 (1968) 380-404
46. Tanner R.I. Engineering Rheology. second ed. (1988), Oxford Press, London
47. Titomanlio G., and Jansen K.M.B. In-mold shrinkage and stress prediction in injection molding. Polym. Eng. Sci. 36 (1996) 2041-2049
48. Tucker III C.L. Flow regimes for fiber suspensions in narrow gaps. J. Non-Newtonian Fluid Mech. 39 (1991) 239-268
49. Verleye V., and Dupret F. Prediction of fibers orientation in complex injection molded parts. Proc. ASME Winter Annual Meeting. New Orleans, LA, 28 November-3 December (1993)
50. Walsh S.F. Shrinkage and warping prediction for injection molded components. J. Reinforced Plas. Compos. 12 (1993) 769-777
51. Yamane Y., Kaneda Y., and Doi M. Numerical simulation of semi-dilute suspensions of rodlike particles in shear flow. J. Non-Newtonian Fluid Mech. 54 (1994) 405-421
52. Zheng, R., 1991. Boundary Element Methods for some Problems in Fluid Mechanics and Rheology, Ph.D. Thesis, University of Sydney.
53. Zheng R., Kennedy P., Phan-Thien N., and Fan X.J. Thermoviscoelastic simulation of thermally and pressure-induced stresses in injection molding for the prediction of shrinkage and warpage for fiber-reinforced thermoplastics. J. Non-Newtonian Fluid Mech. 84 (1999) 159-190
54. Zoellner O.J., and Evans J.A. Plastic-metal hybrid. A new development in the injection molding technology. ANTEC 2002 Annual Technical Conference. Sanfrancisco, CA (2002) 1-4
55. Zoetelief W.F., Douven L.F.A., and Ingen-Housz A.J. Residual thermal stresses in injection molded products. Polym. Eng. Sci. 36 (1996) 1886-1896
56. Zoetelief W.F., Peters G.W.M., and Meijer H.E.H. Numerical simulation of the multi-component injection molding process. Int. Polym. Process 12 (1997) 216-277