Strategy of considering microstructure effect on weld residual stress analysis

Journal of Pressure Vessel Technology, Transactions of the ASME

Volumn 129, Issue 4, 2007, Pages 619-629

  Mochizuki, Masahito ^a,b,c   Toyoda, Masao ^a,c  

^a ASME   (Japan)

^b JSME ^*  (Germany)

^c OSAKA UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BUCKLING DEFORMATION; WELD RESIDUAL STRESS ANALYSIS; WELDED STRUCTURES;

BRITTLE FRACTURE; BUCKLING; MICROSTRUCTURE; RESIDUAL STRESSES; STRESS CORROSION CRACKING; THERMAL STRESS;

WELDING;

EID: 36348951649     PISSN: 00949930     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2767344     Document Type: Article

References (49)

1. Satoh, K., 1972, "Transient Thermal Stresses of Weld Heat-Affected Zone by Both-Ends-Fixed Bar Analogy," Trans. Jpn. Weld. Soc., 3(1), pp. 125-134.
2. Satoh, K., 1972, "Thermal Stresses Developed in High-Strength Steels Subjected to Thermal Cycles Simulating Weld Heat-Affected Zone," Trans. Jpn. Weld. Soc., 3(1), pp. 135-142.
3. Itoh, Y., Nagata, K., Yanuki, T., and Mori, T., 1984, "Mechanical Properties of Steels Subjected to Thermal Prestraining Cycles and its Application to Deformation Analysis of Weld Joint," Q. J. Jpn. Weld. Soc., 52(3), pp. 314-319, in Japanese.
4. Itoh, Y., Nagata, K., Fukakura, J., and Mori, T., 1984, "The Effect of Local Heat Treatment at Weld Zone on Transient Thermal Stresses and Residual Stresses of 13Cr Cast Steel," Q. J. Jpn. Weld. Soc., 2(1), pp. 83-88, in Japanese.
5. Itoh, Y., Nagata, K., Yanuki, T., and Mori, T., 1984, "Transient Thermal Stresses and Residual Stresses of 13Cr Cast Steels During Welding," Q. J. Jpn. Weld. Soc., 2(2), pp. 348-354, in Japanese.
6. Itoh, Y., and Tanaka, K., 1985, "Residual Stress Characteristics of 13Cr Cast Steel Weldments Prepared With Austenitic Weld Metal," Q. J. Jpn. Weld. Soc., 3(3), pp. 604-611, in Japanese.
7. Itoh, Y., 1985, "Mechanical Properties of Weld Metals Subjected to Thermal Prestraining Cycles and its Application to Deformation Analysis of Weld Joint," Q. J. Jpn. Weld. Soc., 3(4), pp. 862-869, in Japanese.
8. Itoh, Y., Saitoh, Y., Fukakura, J., and Kashiwaya, H., 1986, "Multi-Thermal Cycles Simulation of Transient Thermal Stresses of 13Cr Cast Steels During Multi-Pass Welding," Q. J. Jpn. Weld. Soc., 4(2), pp. 423-429, in Japanese.
9. Vincent, Y., Petit-Grostabussiat, S., and Jullien, J. F., 2001, "Thermal, Metallurgical, Mechanical Simulations and Experimental Validations of Residua] Stresses in the Heat Affected Zone," Document for the Sixth International Seminar on Numerical Analysis of Weldability, Graz-Seggau, Austria, pp. 1-21.
10. Volden, L., Gundersen, Ø., and Rørvik, G., 1999, "Development of Residual Stresses in High Strength Low Allow Steel," Proceedings of the Ninth International Offshore and Polar Engineering Conference and Exhibition, Brest, France, ISOPE-99-JSC-169, Vol. 4, pp. 134-139.
11. Gundersen, Ø., Zhang, Z., Volden, L., Rørvik, G., and Akselen, O. M., 1999, "Modeling of Residual Stresses in Weld Simulated Restrained C-Mn Steel Specimens," Proceedings of the Ninth International Offshore and Polar Engineering Conference and Exhibition, Brest, France, ISOPE-99-JSC-141, Vol. 4, pp. 187-194.
12. Ashby, M. F., and Easterling, K. E., 1982, "A First Report on Diagrams for Grain Growth in Welds," Acta Metall., 30, pp. 1969-1978.
13. Kirkaldy, J. S., and Venugopalan, D., 1983, "Prediction of Microstructure and Hardenability in Low Alloy Steels," Proceedings of the International Conference on Phase Transformation in Ferrous Alloys, AIME, pp. 125-148.
14. Bhole, S. D., and Adil, G. K., 1992, "HAZ Hardness and Microstructure Predictions of Arc Welded Steels, I. Review of Predictive Models," Can. Metall. Q., 31(2), pp. 151-157.
15. Bhole, S. D., and Adil, G. K., 1992, "HAZ Hardness and Microstructure Predictions of Arc Welded Steels, II. CCT Diagram Method," Can. Metall. Q., 31(2), pp. 159-165.
16. Mukai, A., Nakano, T., Okamoto, H., and Morita, K., 2000, "Investigation on MAG Wires for Building Structure," Journal of Steel Construction Engineering, 7(26), pp. 13-25, in Japanese.
17. Mochizuki, M., Hayashi, M., and Hattori, T., 2000, "Residual Stress Distribution Depending on Welding Sequence in Multi-Pass Welded Joints With X-Shaped Groove," ASME J. Pressure Vessel Technol., 122(1), pp. 27-32.
18. Mochizuki, M., Hattori, T., and Nakakado, K., 2000, "Residual Stress Reduction and Fatigue Strength Improvement by Controlling Welding Pass Sequences," ASME J. Eng. Mater. Technol., 122(1), pp. 108-112.
19. Nakagomi, T., 2001, "Control of Interpass Temperature in Beam-to-Column Structures of Steel Framed Structures," Structural Technology, 14(5), pp. 18-25, in Japanese.
20. Okazawa, T., Sakamoto, S., Kuramochi, M., Fukai, S., and Yamada, K., 2001, "Study on Influence of Heat Input and Inter-pass Temperature on the Mechanical Properties and the Execution Efficiency of Weld Joints in Steel Structures," Journal of Steel Construction Engineering, 8(31), pp. 1-10, in Japanese.
21. Miyazaki, K., Mochizuki, M., Kanno, S., Hayashi, M., Shiratori, M., and Yu, Q., 2002, "Analysis of Stress Intensity Factor due to Surface Crack Propagation in Residual Stress Fields Caused by Welding," JSME Int. J., Ser. A, 45(2), pp. 199-207.
22. Mochizuki, M., Toyoda, M., Pasquale, P., Veneziano, C., and Burget, W., 2002, "Numerical Simulation of Welding Heat Cycles During Multi-Pass Welding and Their Effects on Joint Performance," Mathematical Modelling of Weld Phenomena 6, H. Cerjak, ed., Maney, London, pp. 671-683.
23. Johnson, W. A., and Mehl, R. F., 1939, "Reaction Kinetics in Process of Nucleation and Growth," J. Mol. Struct.: THEOCHEM, 135, pp. 416-458.
24. Avrami, M., 1939, "Kinetics of Phase Change. I: General Theory," J. Chem. Phys., 7, pp. 103-112.
25. Avrami, M., 1940, "Kinetics of Phase Change. II: Transformation-Time Relations for Random Distribution of Nuclei," J. Chem. Phys., 8, pp. 212-224.
26. Avrami, M., 1941, "Kinetics of Phase Change. III: Granulation, Phase Change and Microstructure," J. Chem. Phys., 9, pp. 177-184.
27. Koistinen, D. P., and Marbuerger, R. E., 1959, "A General Equation Prescribing Extend of Austenite-Martensite Transformation in Pure Fe-C Alloys and Plain Carbon Steels," Acta Metall., 7, pp. 50-60.
28. Leblond, J. B., and Devaux, J. C., 1984, "A New Kinetic Model for Anisothermal Metallurgical Transformations in Steels Including Effect of Austenite Grain Size," Acta Metall., 32(1), pp. 137-146.
29. Leblond, J. B., Mottet, G., and Devaux, J. C., 1986, "A Theoretical and Numerical Approach to the Plastic Behavior of Steels During Phase Transformation," J. Mech. Phys. Solids, 34, pp. 395-432.
30. Thors, T., 1998, "Thermomechanical Calculation of Quench Distortion With Application to Case Hardening of Steel," Scand. J. Metall., 27, pp. 159-170.
31. Ronda, J., and Oliver, G. J., 2000, "Consistent Thermo- MechamoMetallurgical Model of Welded Steel With Unified Approach to Derivation of Phase Evoluation Laws and Transformation-Induced Plasticity," Comput.Methods Appl. Mech. Eng., 189, pp. 361-417.
32. Kim, J., Im, S., and Kim, H.-G., 2005, "Numerical Implementation of a Thermo-Elasto-Plastic Constitutive Equation in Consideration of Transformation Plasticity," International Journal of Plasticity, 21, pp. 1384-1408.
33. Bertero, V. V., Anderson, J. C., and Krawinkler, H., 1994, Performance of Steel Building Structures During the Northridge Earthquake, University of California at Berkeley, Report No. UCB/EERC-94-09.
34. Toyoda, M., 1995, "How Steel Structures Fared in Japan's Great Earthquake," Weld. J. (Miami, FL, U.S.), 74(12), pp. 31-42.
35. 1996, Japanese Architectural Standard Specification (JASS 6). Steel Work, 7th ed., Architectural Institute of Japan, ed., Architectural Institute of Japan, Tokyo.
36. Rosenthal, D., 1941, "Mathematical Theory of Heat Distribution During Welding and Cutting," Weld. J. (Miami, FL, U.S.), 20, pp. 220s-234s.
37. Goldak, J., Chakravarti, A., and Bibby, M., 1984, "A New Finite Element Model for Welding Heat Sources," Metall. Trans. B, 15B, pp. 299-305.
38. Goldak, J., Bibby, M., Moore, J., House, R., and Patel, B., 1986, "Computer Modeling of Heat Flow in Welds," Metall. Trans. B, 17B, pp. 587-600.
39. Nguyen, N. T., Ohta, A., Matsuoka, K., Suzuki, N., and Maeda, Y., 1999, "Analytical Solutions for Transient Temperature of Semi-Infinite Body Subjected to 3-D Moving Heat Sources," Weld. J. (Miami, FL, U.S.), 78, pp. 265s-274s.
40. Blondeau, R., Maynier, Ph., and Dollet, J., 1973, "Forecasting the Hardness and Resistance of Carbon and Low-Alloy Steels According to Their Structure and Composition," Mem. Sci. Rev. Metall., 70(12), pp. 883-892.
41. Blondeau, R., Maynier, Ph., Dollet, J., and Vieillard-Baron, B., 1975, "Forecasting the Hardness, Resistance and Breaking Point of Carbon and Low-alloy Steels According to Their Composition and Heat Treatment," Mem. Sci. Rev. Metall., 72(11), pp. 759-769.
42. Mochizuki, M., Enomoto, K., Okamoto, N., Saito, H., and Hayashi, E., 1993, "Welding Residual Stresses at the Intersection of a Small Diameter Pipe Penetrating a Thick Plate," Nucl. Eng. Des., 144(3), pp. 439-447.
43. Mochizuki, M., Hayashi, M., and Hattori, T., 1999, "Comparison of Five Evaluation Methods of Residual Stress in a Welded Pipe Joint," JSME Int. J., Ser. A, 42(1), pp. 104-110.
44. Mochizuki, M., and Toyoda, M., 2002, "Numerical Simulation of Temperature and Microstructure in X-80 Girth Welded Pipelines," Application and Evaluation of High-Grade Linepipes in Hostile Environments, R. Denys, and M. Toyoda, eds., Scientific Surveys Ltd., London, pp. 841-863.
45. Karkhin, V. A., Kreutz, W., Pavlova, N. O., and Schulz, W., 2001, "Effect of Low-Temperature Phase Transformations on Residual Stress Distributions in Laser Welded Joints," Mathematical Modelling of Weld Phenomena 5, H. Cerjak, ed., IOM Communications, London, pp. 597-614.
46. Vincent, Y., Petit-Grostabussiat, S., and Jullien, J. F., 2002, "Thermal, Metallurgical and Mechanical Simulations and Experimental Validation of the Residual Stresses in the Heat-Affected Zone," Mathematical Modelling of Weld Phenomena 6, H. Cerjak, ed., Maney, London, pp. 591-627.
47. Mochizuki, M., Hayashi, M., Nakagawa, M., Tada, N., and Shimizu, S., 1997, "A Simplified Analysis of Residual Stress at Welded Joints Between Plate and Penetrating Pipe," JSME Int. J., Ser. A, 40(1), pp. 8-14.
48. Mochizuki, M., Hayashi, M., and Hattori, T., 1999, "Residual Stress Analysis by Simplified Inherent Strain at Welded Pipe Junctures in a Pressure Vessel," ASME J. Eng. Mater. Technol., 121(4), pp. 353-357.
49. Mochizuki, M., Hayashi, M., and Hattori, T., 2000, "Numerical Analysis of Welding Residual Stress and its Verification Using Neutron Diffraction Measurement," ASME J. Eng. Mater. Technol., 122(1), pp. 98-103.