Interaction of interface delamination and plasticity in tensile steel members reinforced by CFRP plates

International Journal of Fracture

Volumn 146, Issue 1-2, 2007, Pages 79-92

  Bocciarelli, Massimiliano ^a   Colombi, Pierluigi ^a   Fava, Giulia ^a   Poggi, Carlo ^a  

^a POLITECNICO DI MILANO   (Italy)

Author keywords

Adhesive joints; Cohesive delamination; Mechanical testing; Plasticity

Indexed keywords

ADHESIVE JOINTS; BEARING CAPACITY; CARBON FIBER REINFORCED PLASTICS; DELAMINATION; ELASTICITY; FAILURE (MECHANICAL); INTERFACES (MATERIALS); MECHANICAL TESTING; PLASTIC DEFORMATION; PLASTICITY; STEEL; TENSILE PROPERTIES;

COHESIVE DELAMINATION; INTERFACE FAILURE; TENSILE STEEL MEMBERS;

PLATES (STRUCTURAL COMPONENTS);

EID: 36249007969     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-007-9144-8     Document Type: Article

References (31)

1. Alfredsson KS (2003). On the determination of constitutive properties of adhesive layers loaded in shear: An inverse solution. Int J Frac 123: 49-62
2. Alfredsson KS (2004). On the istantaneous energy release rate of the end-notch flexure adhesive joint specimen. Int J Solids Struct 41: 4787-4807
3. Blackman BRK, Kinloch AJ, Paraschi M and Teo WS (2003). Measuring the mode i adhesive fracture energy, G IC, of structural adhesive joints: the results of an international round-robin. Int J Adhesion & Adhes 23: 293-305
4. Camacho GT and Ortiz M (1996). Computational modelling of impact damage in brittle materials. Int J Solids Struct 33(20-22): 2899-2938
5. Chajes MJ, Finch WW Jr, Januszka TF, and Thonson TA Jr (1996). Bond and force transfer of composite material plates bonded to concrete.. ACI Struct J 93(2): 295-303
6. Chen JF and Teng JG (2001). Anchorage strength models for FRP and steel plates bonded to joints. J Struct Eng 127(7): 784-791
7. Colombi P and Poggi C (2006). Strengthening of tensile steel members and bolted joints using adhesively bonded CFRP plates. Constr Build Mater 20: 22-33
8. Fava GV (2007) Strengthening of metallic structures using carbon fiber reinforced polymer materials. PhD thesis, Doctoral School of Politecnico di Milano
9. Fawzia S, Al-Mahaidi R, Zhao XL and Rizkalla SH (2007). Strengthhening of circular hollow steel tubular sections using high modulus CFRP sheets. Constr Build Mater 21: 839-845
10. Fawzia S, Zhao XL, Al-Mahaidi R and Rizkalla E (2005). Bond characteristics between CFRP and steel plates in double strap joints. Int J Adv Steel Construct 1: 17-28
11. HKS Inc, Pawtucket, RI, USA (2005) ABAQUS/Standard, Theory and User's Manuals, release 6.5-1, 2005
12. Hollaway LC (2003). The evaluation of and the way forward for advanced polymer composites in the civil infrastructure. Constr Build Mater 17: 365-378
13. Hollaway LC and Cadei J (2002). Progress in the technique of upgrading metallic structures with advanced polymer composites. Progress Struct Eng Mater 4: 131-148
14. Jiao H and Zhao XL (2004). CFRP strengthened butt-welded very high strength (vhs) circular steel tubes. Thin Welded Struct 42: 963-978
15. Jones SC and Civjan SA (2003). Application of fiber reinforced polymer overlays to extend steel fatigue life. J Composite Constr ASCE 7: 331-338
16. Lenwari A, Thepchatri T and Watanabe E (2002). Prediction of premature separation of bonded CFRP plates from strengthened steel beams using a fracture criterion. Struct Eng Mech 14: 565-574
17. Maier G, Bocciarelli M, Bolzon G and Fedele R (2006). Inverse analyses in fracture mechanics. Int J Frac 138: 47-73
18. Needleman A and Rosakis AJ (1999). The effect of bond strenght and loading rate on the conditions governing the attainement of intersonic crackngrowth along an interface. J Mech Phys Solids 47(12): 2411-2449
19. Ortiz M and Pandolfi A (1999). Finite-deformation irreversible cohesive elements for three-dimensional crack-propagation analysis. Int J Numeric Methods Eng 44: 1267-1282
20. Rose JH, Ferrante J and Smith JR (1981). Universal binding energy curves for metals and bimetallic interfaces. Phys Rev Lett 47(9): 675-678
21. Saadatmanesh H (1997). Extending service life of concrete and mansonary structures with fiber composites. Constr Build Mater 11: 327335
22. Taljsten B (1997). Defining anchor lengths of steel and CFRP plates bonded to concrete. Int J Adhesion Adhes 17(4): 319-327
23. Tavakkolizadeh M and Saadatmanesh H (2003a). Fatigue strength of steel girders strengthened with carbon fiber reinforced polymer patch. J Struct Eng ASCE 12: 186-196
24. Tavakkolizadeh M and Saadatmanesh H (2003). Strengthening of steel-concrete composite girders using carbon fiber reinforced polymer sheets. J Struct Eng ASCE 129(1): 30-40
25. Tvergaard V and Hutchinson JW (1996). On the toughness of ductile adhesive joints. J Mech Phys Solids 44: 789-800
26. Wu Z, Yuan H and Niu H (2002). Stress transfer and fracture propagation in different kinds of adhesive joints. J Eng Mech ASCE 128(5): 563-573
27. Xu XP and Needleman A (1994). Numerical simulation of fast crack growth in brittle solids. J Mech Phys Solids 42: 1397-1434
28. Yang QD and Thouless MD (2001). Mixed-mode fracture analyses of plastically-deforming adhesive joints. Int J Frac 110: 175-187
29. Yang QD, Thouless MD and Ward SM (1999). Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation. J Mech Phys Solids 47: 1337-1353
30. Yang QD, Thouless MD and Ward SM (2001). Elastic-plastic mode-II fracture of adhesive joints. Int J Solids Struct 38: 3251-3262
31. Zhao XL, Zhang L (2007) State-of-the-art review on frp strengthened steel structures. Eng Struct (in press)