Thermal osteonecrosis and bone drilling parameters revisited

Archives of Orthopaedic and Trauma Surgery

Volumn 128, Issue 1, 2008, Pages 71-77

  Augustin, Goran ^a   Davila, Slavko ^a   Mihoci, Kristijan ^b   Udiljak, Toma ^b   Vedrina, Denis Stjepan ^c   Antabak, Anko ^a  

^a KBC Zagreb   (Croatia)

^b UNIVERSITY OF ZAGREB   (Croatia)

^c UNIVERSITY OF ZAGREB   (Croatia)

Author keywords

Bone drilling; Thermal osteonecrosis

Indexed keywords

ANIMAL TISSUE; ARTICLE; BONE NECROSIS; COOLING; DRILL; LAVAGE; MALE; NONHUMAN; ORTHOPEDIC EQUIPMENT; ORTHOPEDIC SURGERY; PRIORITY JOURNAL; PROSTHESIS FIXATION; TEMPERATURE MEASUREMENT; THERMAL INJURY; THERMOREGULATION;

ANIMALS; BODY TEMPERATURE; BONE AND BONES; EQUIPMENT DESIGN; FEMUR; IRRIGATION; ORTHOPEDIC PROCEDURES; OSTEONECROSIS; SWINE;

EID: 35848959696     PISSN: 09368051     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00402-007-0427-3     Document Type: Article

References (36)

1. Bolhofner BR, Russo PR, Carmen B (1999) Results of intertrochanteric femur fractures treated with a 135° sliding screw with a two-hole side plate. J Orthop Trauma 13:5-8
2. Lunsjo K, Ceder L, Thorngren KG et al (2001) Extramedullary fixation of 569 unstable intertrochanteric fractures: A randomized multicenter trial of the Medoff sliding plate versus three other screw-plate systems. Acta Orthop Scand 72:133-140
3. Mullaji AB, Thomas TL (1993) Low-energy subtrochanteric fractures in elderly patients: Results of fixation with the sliding screw plate. J Trauma 34:56-61
4. Wachtl SW, Gautier E, Jakob RP (2001) Low reoperation rate with the Medoff sliding plate: 1 technical failure in 63 trochanteric hip fractures. Acta Orthop Scand 72:141-145
5. Feith R (1975) Side effects of acrylic cement, implanted into bone. Acta Orthop Scand 161(Suppl):3-136
6. Huiskes R (1980) Some fundamental aspects of human joint replacement. Acta Orthop Scand 185(Suppl):1-208
7. Eriksson RA, Albrektsson T, Magnusson B (1984) Assessment of bone viability after heat trauma. A histological, histochemical and vital microscopic study in the rabbit. Scand J Plast Reconstr Surg 18:261-268
8. Abouzgia MB, James DF (1995) Measurements of shaft speed while drilling through bone. J Maxillofac Surg 53:1308-1315
9. Bachus KN, Rondina MT, Hutchinson DT (2000) The effects of drilling force on cortical temperatures and their duration: An in vitro study. Med Eng Phys 22:685-691
10. Benington IC, Biagioni PA, Crossey PJ et al (1996) Temperature changes in bovine mandibular bone during implant site preparation: An assessment using infra-red thermography. J Dent 24:263-267
11. Aerssens J, Boonen S, Lowet G, Dequeker J (1998) Interspecies differences in bone composition, density, and quality: Potential aplications for in vivo bone research. Endocrinology 139:663-670
12. Sedlin ED, Hirsch C (1966) Factors affecting the determination of the physical properties of femoral cortical bone. Acta Orthop Scand 37:29-48
13. Matthews LS, Hirsch C (1972) Temperature measured in human cortical bone when drilling. J Bone Joint Surg 54A:297-308
14. Natali C, Ingle P, Dowell J (1996) Orthopaedic bone drills - can they be improved? Temperature changes near the drilling face. J Bone Joint Surg Br 78:357-362
15. Jacob CH, Berry JT, Pope MH (1976) A study of the bone machining process-drilling. J Biomech 9:343-349
16. Lentrodt J, Bull HG (1976) Animal experimental studies on bone regeneration following drilling of the bone. Dtsch Zahnarztl Z 31:115-124
17. Rhinelander FW (1974) Tibial blood supply in relation to fracture healing. Clin Orthop Relat Res 105:34-81
18. Berman AT, Reid JS, Yanicko DR et al (1984) Thermally induced bone necrosis in rabbits: Relation to implant failure in humans. Clin Orthop 186:284-292
19. Bonfield W, Li CH (1968) The temperature dependence of the deformation of bone. J Biomech 1:323-329
20. Lundskog J (1972) Heat and bone tissue. An experimental investigation of the thermal properties of bone and threshold levels for thermal injury Scand. J Plast Reconstr Surg 9:1-80
21. Eriksson AR, Albrektsson T (1983) Temperature threshold levels for heat-induced bone tissue injury: A vital-microscopic study in the rabbit. J Prosthet Dent 50:101-107
22. Neal JG, Cox MJ, Drake DB et al (1997) A new computerized control unit for small bone surgical instruments. Med Prog Technol 21(Suppl):25-29
23. Bechtol CO, Ferguson AB, Laing PC (1959) Metals and engineering in bone and joint surgery. Williams & Wilkins, Baltimore
24. Farnworth GH, Burton JA (1974) Optimization of drill geometry for orthopaedic surgery. In: 14th International machine tool design and research conference. Manchester, England
25. Bast P, Engelhardt M, Lauer W et al (2003) Identification of milling parameters for manual cutting of bicortical bone structures. Comput Aided Surg 8:257-263
26. Costich ER, Youngblood PJ, Walden JM (1964) Operative oral surgery. A study of the effects of high-speed rotary instruments on bone repair in dogs. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 17:563-571
27. Moss RW (1964) Histopathologic reaction of bone to surgical cutting. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 17:405-414
28. Lavelle C, Wedgwood D (1980) Effect of internal irrigation on frictional heat generated from bone drilling. J Oral Surg 38:499-503
29. Benington IC, Biagioni PA, Briggs J et al (2002) Thermal changes observed at implant sites during internal and external irrigation. Clin Oral Implants Res 13:293-297
30. Matthews LS, Green CA, Goldstein SA (1984) The thermal effects of skeletal fixation-pin insertion in bone. J Bone Joint Surg Am 66:1077-1083
31. Saha S, Pal S, Albright JA (1982) Surgical drilling: Design and performance of an improved drill. J Biomech Eng 104:245-252
32. Sorenson FM, Cantwell KR, Alpin AW (1964) Thermogenics in cavity preparation using air turbine handpieces: The relationship of heat transferred to rate of tooth structure removal. J Prosthet Dent 14:3-9
33. Davidson SR, James DF (2003) Drilling in bone: Modeling heat generation and temperature distribution. Biomech Eng 125:305-314
34. Wiggins KL, Malkin S (1976) Drilling of bone. J Biomech 9:553-559
35. Toews AR, Bailey JV, Townsend HG, Barber SM (1999) Effect of feed rate and drill speed on temperatures in equine cortical bone. Am J Vet Res 60:942-944
36. Sundén G (1967) Some aspects of longitudinal bone growth: An experimental study of the rabbit tibia. Acta Orthop Scand 103(Suppl)