Analytical and experimental evaluations of the influence of fracture surface roughness, its sliding actions and the associated plasticity on fatigue crack propagation

International Journal of Plasticity

Volumn 24, Issue 2, 2008, Pages 302-326

  Bian, Lichun ^a   Taheri, Farid ^a   Lu, You ^a  

^a DALHOUSIE UNIVERSITY   (Canada)

Author keywords

Friction; Mixed mode crack; Plastic zone; Stress intensity factor; Surface roughness

Indexed keywords

FATIGUE CRACK PROPAGATION; PLASTICS; PLATES (STRUCTURAL COMPONENTS); STRESS INTENSITY FACTORS; SURFACE ROUGHNESS;

EXPERIMENTAL DATA; FRACTURE SURFACES; MIXED MODE CRACKS; PLASTIC ZONES;

MAGNESIUM ALLOYS;

EID: 35748961416     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.04.001     Document Type: Article

References (41)

1. Bach F.W., Zilberg J., Rodman M., and Rossberg A. Influence of lubrication and rolling system on roughness of magnesium sheets. METALL 57 (2003) 294-298
2. Bian L., and Lim J.K. Fatigue strength and stress concentration factors of CHS-to-RHS T-joints. Journal of Constructional Steel Research 59 (2003) 627-640
3. Bian, L., Taheri, F., in press. Investigation of fatigue crack propagation in line pipes containing an angled surface flaw. Journal of Pressure Vessel Technology - ASME.
4. Bowden F.P., and Tabor D. Friction and Lubrication of Solids vol. II (1967), Oxford University Press, London, UK
5. Bowden F.P., and Tabor D. The Friction and Lubrication of Solids (1986), Oxford Science Publishers, UK p. 322
6. Broberg K.B. Cracks and Fracture (1999), Academic Press, San Diego, CA, United States
7. 1c fracture toughness testing, British Standards Institution.
8. Bulloch J.H. Effects of mean stress on the threshold fatigue crack extension rates of two spheroidal graphite cast irons. Theoretical and Applied Fracture Mechanics 18 (1992) 15-30
9. Campbell P., and Ritchie R.O. Mixed-mode high-cycle fatigue-crack growth thresholds in Ti-6Al-4V II: quantification of crack-tip shielding. Engineering Fracture Mechanics 67 (2000) 229-249
10. Christensen R.M. The brittle versus the ductile nature of fracture modes I and II. International Journal of Fracture 123 (2003) 157-164
11. Coffin L.F. Fatigue in machines and structures-power generation. Fatigue and Microstructure (1978), ASM pp. 4-7
12. Dahlin P., and Olsson M. Reduction of mode I fatigue crack growth rate due to occasional mode II loading. International Journal of Fatigue 26 (2004) 1083-1093
13. Egami N., and Kitaoka S. Mixed mode fatigue crack thresholds from bending and cyclic torsion of a plate. Fatigue & Fracture of Engineering Materials and Structures 19 (1996) 551-560
14. Erdogan F., and Sih G.C. On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering - ASME 85D (1963) 519-527
15. Evans A.G., and Hutchinson J.W. Effects of non-planarity on the mixed mode fracture resistance of bimaterial interfaces. Acta Metallurgica 37 (1989) 909-916
16. Goulet R.U., Gross T.S., and Mendelson D.A. Evidence of fracture surface interference for cracks loaded in shear detected by phase-shifted speckle interferometry. Metallurgical and Materials Transactions A 27A (1996) 3852-3860
17. Hahn O., Schumann S., Meschut G., and Fuhrmann T. Material-specific joining techniques for magnesium body structures. Material Science Forum 488-489 (2005) 357-360
18. Hammouda M.M.I., Fayed A.S., and Sallam H.E.M. Simulation of mixed mode I/II cyclic deformation at the tip of a short kinked inclined crack with frictional surfaces. International Journal of Fatigue 25 (2003) 743-753
19. Huang W.J., Hou B., Pang Y.X., and Zhou Z.R. Fretting wear behavior of AZ91D and AM60B magnesium alloys. Wear 260 (2006) 1173-1178
20. Jeong D.Y. Application of effective stress intensity factor crack closure model to evaluate train load sequence effects on crack growth rates. Theoretical and Applied Fracture Mechanics 22 (1995) 43-50
21. In: Kainer K.U. (Ed). Magnesium Alloys and Their Applications (2000), Wiley-VCH, Weinheim
22. Lawn B.R. Fracture of Brittle Solids. 2nd ed. (1993), Cambridge University Press, UK
23. Litewka A., and Szojda L. Damage, plasticity and failure of ceramics and cementitious composites subjected to multi-axial state of stress. International Journal of Plasticity 22 (2006) 2048-2065
24. Omer N., and Yosibash Z. On the path independency of the point-wise J integral in three-dimensions. International Journal of Fracture 136 (2005) 1-36
25. Olurin O.B., McCullough K.Y.G., Fleck N.A., and Ashby M.F. Fatigue crack propagation in aluminum alloy foams. International Journal of Fatigue 23 (2001) 375-382
26. Paris P.C., and Erdogan F.A. critical analysis of crack propagation laws. ASME - Journal of Basic Engineering, Series D 85 (1963) 528-539
27. Ramakrishna Naidu N.K., and Ganesh Sundara Raman S. Effect of contact pressure on fretting fatigue behaviour of Al-Mg-Si alloy AA6061. International Journal of Fatigue 27 (2005) 283-291
28. Reardon A.C., and Quesnel D.J. Fracture surface interference effects in mode III. Mechanics of Materials 19 (1995) 213-226
29. Rice J.R. Mathematical analysis in the mechanics of fracture. In: Liebowitz H. (Ed). Fracture: An Advanced Treatise vol. 11 (1968), Academic Press, New York, USA 214-223
30. Rice J.R. Mathematical analysis in the mechanics of fracture. In: Liebowitz H. (Ed). Fracture of Solids: Fracture of Solids vol. 2 (1969), Academic Press, New York, USA 218-221
31. Ritchie R.O., Gilbert C.J., and McNaney J.M. Mechanics and mechanisms of fatigue damage and crack growth in advanced materials. International Journal of Solids and Structures 37 (2000) 311-329
32. Sih G.C. Three dimensional crack problems. Mechanics of Fracture 2 (1975), Noordhoff, Netherlands
33. Soh A.K., and Bian L. Mixed mode fatigue crack growth criteria. International Journal of Fatigue 23 (2001) 427-439
34. Simandjuntak S., Alizadeh H., Smith D.J., and Pavier M.J. Three dimensional finite element prediction of crack closure and fatigue crack growth rate for a corner crack. International Journal of Fatigue 28 (2006) 335-345
35. Song S.H., Paulino G.H., and Buttlar W.G. Simulation of crack propagation in asphalt concrete using an intrinsic cohesive zone model. Journal of Engineering Mechanics - ASCE 132 (2006) 1215-1223
36. Subramanya H.Y., Viswanath S., and Narasimhan R. A three-dimensional numerical study of mixed mode (I and II) crack tip fields in elastic-plastic solids. International Journal of Fracture 136 (2005) 167-185
37. Tanaka K., Akiniwa Y., and Nakamura H. J-integral approach to mode III fatigue crack propagation in steel under torsional loading. Fatigue & Fracture of Engineering Materials and Structures 19 (1996) 571-579
38. Toi Y., and Kang S.S. Mesoscopic natural element analysis of elastic moduli, yield stress and fracture of solids containing a number of voids. International Journal of Plasticity 21 (2005) 2277-2296
39. Vena P., Gastaldi D., Contro R., and Petrini L. Finite element analysis of the fatigue crack growth rate in transformation toughening ceramics. International Journal of Plasticity 22 (2006) 895-920
40. Weick M., and Aktaa J. Microcrack propagation and fatigue lifetime under non-proportional multiaxial cyclic loading. International Journal of Fatigue 25 (2003) 1117-1124
41. Yamauchi N., Demizu K., Ueda N., Cuong N.K., Sone T., and Hirose Y. Friction and wear of DLC films on magnesium alloy. Surface & Coatings Technology 193 (2005) 277-282