Growth of textured mullite fibers using a quadrupole lamp furnace

Journal of the European Ceramic Society

Volumn 28, Issue 2, 2008, Pages 455-463

  Yoon, W ^a   Sarin, P ^a   Kriven, W M ^a  

^a University of Illinois at Urbana Champaign   (United States)

Author keywords

Fibers; Grain growth; Mullite; Synchrotron XRD

Indexed keywords

ANISOTROPY; CHEMICAL STABILITY; CREEP RESISTANCE; CRYSTAL GROWTH; GRAIN GROWTH; HIGH TEMPERATURE EFFECTS; MULLITE; POLYCRYSTALLINE MATERIALS; SCANNING ELECTRON MICROSCOPY; SINGLE CRYSTALS; STRENGTH OF MATERIALS; X RAY DIFFRACTION ANALYSIS;

CERAMIC OXIDE FIBERS; POLYCRYSTALLINE MULLITE FIBERS; QUADRUPOLE LAMP FURNACE;

CERAMIC FIBERS;

ANISOTROPY; CERAMIC FIBERS; CHEMICAL STABILITY; CREEP RESISTANCE; CRYSTAL GROWTH; GRAIN GROWTH; HIGH TEMPERATURE EFFECTS; MULLITE; POLYCRYSTALLINE MATERIALS; SCANNING ELECTRON MICROSCOPY; SINGLE CRYSTALS; STRENGTH OF MATERIALS; X RAY DIFFRACTION ANALYSIS;

EID: 35648937686     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.03.019     Document Type: Article

References (38)

1. Bunsell A.R., and Berger M.H. Fine diameter ceramic fibres. J. Eur. Ceram. Soc. 20 13 (2000) 2249-2260
2. Schneider H. Thermal expansion of mullite. J. Am. Ceram. Soc. 73 7 (1990) 2073-2076
3. Schneider H., Pask J.A., and Okada K. Mullite and mullite ceramics (1994), John Wiley, Chichester, NY
4. Sundaresan S., and Aksay I.A. Mullitization of diphasic aluminosilicate gels. J. Am. Ceram. Soc. 74 10 (1991) 2388-2392
5. Mroz T.J., and Laughner J.W. Microstructures of mullite sintered from seeded sol gels. J. Am. Ceram. Soc. 72 3 (1989) 508-509
6. Petry M.D., and Tai-Il M. Effect of thermal exposures on the strengths of Nextel 550 and 720 filaments. J. Am. Ceram. Soc. 82 10 (1999) 2801-2807
7. Mileiko S.T., Kiiko V.M., Starostin M.Y., Kolchin A.A., and Kozhevnikov L.S. Fabrication and some properties of single crystalline mullite fibers. Scrip. Mater. 44 2 (2001) 249-255
8. Johnson B.R., Kriven W.M., and Schneider J. Crystal structure development during devitrification of quenched mullite. J. Eur. Ceram. Soc. 21 14 (2001) 2541-2562
9. Xiao Z., and Brian S.M. The production of mullite fibers via inviscid melt-spinning (IMS). Mater. Lett. 37 (1998) 359-365
10. Sayir A., and Farmer S.C. Directionally solidified mullite fibers. MRS Symp. Proc. 365 (1995) 11-20
11. Ghate B.B., Hasselmann D.P.H., and Spriggs R.M. Kinetics of pressure sintering and grain growth of ultra-fine mullite powder. Ceram. Int. 1 (1975) 105-110
12. Huang T.H., Rahaman M.N., Mah T.I., and Parthasarathay T.A. Anisotropic grain growth and microstructural evolution of dense mullite above 1550 °C. J. Am. Ceram. Soc. 83 1 (2000) 204-210
13. Michel D., Mazerolles L., and Portier R. Directional solidification in the alumina-silica system microstructures and interfaces. In: Somiya S., Davis R.F., and Pask J.A. (Eds). Mullite and mullite matrix composites (1990) 435-447
14. Okada K., and Otuska N. Synthesis of mullite whiskers and their application in composites. J. Am. Ceram. Soc. 74 10 (1991) 2414-2418
15. Hong S.H., and Messing G.L. Anisotropic grain growth in diphasic-gel-derived titania-doped mullite. J. Am. Ceram. Soc. 81 5 (1998) 1269-1277
16. Klug H.P., and Alexander L.E. X-ray diffraction procedures for polycrystalline and amorphous materials (1974), Wiley, New York
17. Knapp M., Joco V., Baehtz C., Brecht H.H., Berghaeuser A., Ehrenberg H., et al. Position-sensitive detector system OBI for high resolution X-ray powder diffraction using on-site readable image plates. Nucl. Instrum. Meth. Phys. Res. Sect. A-Accel. Spectrom. Dect. Assoc. Equip. 521 2/3 (2004) 565-570
18. Sarin, P., Haggerty, R. P., Yoon, W., Knapp, M., Berghauser, A., Zschack, P., et al., A curved image plate detector system for high resolution synchrotron X-ray diffraction. J. Synch. Rad., in preparation.
19. Sarin P., Haggerty R.P., Yoon W., Zschack P., Knapp M., and Kriven W.M. Rapid in-situ ultra-high temperature investigations of ceramics using synchrotron X-ray diffraction. Ceram. Eng. Sci. Proc. 27 2 (2006) 313-324
20. Sarin, P., Yoon, W., Jurkschat, K., Zschack, P., Kriven, W. M., Quadrupole lamp furnace for high temperature (up to 2050 K) synchrotron powder X-ray diffraction studies in air in reflection geometry. Rev. Sci. Instrum., 77(9), in press.
21. Siah L.F., Kriven W.M., and Schneider J. In situ, high-temperature, synchrotron, powder diffraction studies of oxide systems in air, using a thermal-image furnace. Mea. Sci. Technol. 16 (2005) 1-8
22. Siah L.F., Schneider J., and Kriven W.M. In situ, in air, high temperature studies of oxide systems using the thermal-imaging technique. Adv. X-ray Anal. 46 (2003) 264-269
23. Hong S.H., and Messing G.L. Development of textured mullite by templated grain growth. J. Am. Ceram. Soc. 82 4 (1999) 867-872
24. Toby, B.H., CMPR-a multipurpose freeware program to display diffraction data, manual & auto indexing, peak fitting and other useful stuff; 2005.
25. Young R.A., Mackie P.E., and Dreele R.B. Application of the pattern-fitting structure-refinement method to X-ray powder diffractometer patterns. J. Appl. Crystallogr. 10 (1977) 262-269
26. Seabaugh M.M., Kerscht I.H., and Messing G.L. Texture development by templated grain growth in liquid-phase-sintered alpha-alumina. J. Am. Ceram. Soc. 80 5 (1997) 1181-1188
27. Okada K., Yasohama S., Hayashi S., and Yasumori A. Mullite long fibres prepared by sol-gel method using water solvent systems. Key Eng. Mater. 132-136 Pt (1997) 1946-1949
28. Schneider H. Transition metal distribution in mullite. In: SOMIYA S., Davis R.F., and Pask J.A. (Eds). Mullite and mullite matrix composites (1990) 135-158
29. Song K.C. Preparation of mullite fibers by the sol-gel method. J. Sol-Gel Sci. Technol. 13 1-3 (1998) 1017-1021
30. Hwang C.M., Tien T.Y., and Chen I.W. Anisotropic grain growth during final stage sintering of silicon nitride ceramics. In: Somiya S., Shimada M., and Watanabe R. (Eds). Sintering '87 (1988) 1034-1039
31. 4 ceramics sintered under high-nitrogen pressure. J. Am. Ceram. Soc. 76 1 (1993) 91-96
32. Seabaugh M.M., Horn D., Kerscht I., Hong S.H., and Messing G.L. Anisotropic grain growth in alumina ceramics. In: German R.M., Messing G.L., and Cornwall R.G. (Eds). Sintering technology (1996) 341-348
33. Amigo J.M., Serrano F.J., Kojdecki M.A., Bastida J., Esteve V., and Reventos M.M. X-ray diffraction microstructure analysis of mullite, quartz and corundum in porcelain insulators. J. Eur. Ceram. Soc. 25 9 (2005) 1479-1486
34. Williamson G.K., and Hall W.H. X-ray line broadening from filed aluminum and wolfram. Acta Metallurg. 1 (1953) 22-31
35. 3. Interface Sci. 8 2-3 (2000) 257-267
36. Suvaci E., Simkovich G., and Messing G.L. The reaction-bonded aluminum oxide (RBAO) process: II, the solid-state oxidation of RBAO compacts. J. Am. Ceram. Soc. 83 8 (2000) 1845-1852
37. Raj R., and Ashby M.F. On grain boundary sliding and diffusional creep. Metall. Trans. 2 4 (1971) 1113-1127
38. Aksay I.A., Dabbs D.M., and Sarikaya M. Mullite for structural, electronic, and optical applications. J. Am. Ceram. Soc. 74 10 (1991) 2343-2358